Pavlos NikolopoulosTeaching & PhD Courses Advanced networks COM-407 This advanced course in computer networks offers an in-depth exploration of how the Internet is designed and operates. Students dive into the architecture of the Internet and gain hands-on understanding of the key protocols that power it.
Giovanni De MicheliExpertise
Design technologies for integrated systems on silicon, such as synthesis, hw/sw codesign and low-power design, as well as systems on heterogeneous platforms including electrical and biological components.
Scientific Director of EcoCloud Center at EPFL
Directing activities towards creating sustainable computation including AI.Designing energy-savvy data centers and edge devices.
More information
Please read http://si2.epfl.ch/~demichel/
Giovanni De Micheli is a research scientist in electronics and Mihai Adrian IonescuAdrian M. Ionescu is Full Professor at the Swiss Federal Institute of Technology, Lausanne, Switzerland. He received the B.S./M.S. and Ph.D. degrees from the Polytechnic Institute of Bucharest, Romania and the National Polytechnic Institute of Grenoble, France, in 1989 and 1997, respectively. He has held staff and/or visiting positions at LETI-CEA, Grenoble, France and INP Grenoble, France and Stanford University, USA, in 1998 and 1999. Dr. Ionescu has published more than 600 articles in international journals and conferences. He received many Best Paper Awards in international conferences, the Annual Award of the Technical Section of the Romanian Academy of Sciences in 1994 and the Blondel Medal in 2009 for contributions to the progress in engineering sciences in the domain of electronics. He is the 2013 recipient of the IBM Faculty Award in Engineering. He served the IEDM and VLSI conference technical committees and was the Technical Program Committee (Co)Chair of ESSDERC in 2006 and 2013. He is a member of the SATW. He is director of the Laboratory of Micro/Nanoelectronic Devices (NANOLAB).
Christophe Emmanuel GenoudExpertise
Political Science, Administration, Public Policy, Decision Making, Organization Sociology, Management.
Current Work
Writing a book on Decision Making.
Public manager, Secretary General of a Geneva municipality, Chairman of the Board of Directors, vacant speaker at the Haute Ecole Spécialisée de Suisse Occidentale (HES-SO) in Lausanne, lecturer at the Ecole Polytechnique fédérale de Lausanne (EPFL), organisational specialist, author of a book on management "Leadership, agility, happiness at work: B
Patrick JermannAfter studies in Geneva (TECFA) and Pittsburgh (LRDC) I joined EPFL in 2003 to coordinate eLearning projects and conduct research in the field of Computer Supported Collaborative Learning (CSCL). Starting 2013 I am responsible for MOOCs production at the Center for Digital Education (CEDE).Former Associate Editor for the IEEE Transactions on Learning Technologies and former Member of the Editorial Board for the International Journal of Computer Supported Collaborative Learning (iJCSCL). Specialties: Interaction analysis, research methods, statistical methods, prototyping, software development, pedagogical design.
Jack Richard WilliamsTeaching & PhD Courses Negotiation techniques MGT-466 This course is designed to give you a practical, hands-on opportunity to learn the basics of negotiating, self leadership and the impact of culture. Strategies and techniques are presented and practiced that will enable you to develop your skills and become a confident negotiator.
Milad SabzehparvarExpertise
Scanning Electrochemical MicroscopyPlasmonic PhotocatalysisMaterial ScienceOpen MSc positions (2023-2024):(1) Design and Fabrication of a Scanning Electrochemical Microscope (SECM) for Photo-Electrochemical Imaging of Nanostructures, (2) Data and Image Analysis of Scanning Electrochemical Microscopy (SECM)
Expertise
Scanning Electrochemical MicroscopyPlasmonic PhotocatalysisMaterial ScienceOpen MSc positions (2023-2024):(1) Design and Fabrication of a Scanning Electrochemical Microscope (SECM) for
Ronan BoulicI come from Brittany, France, where I have completed my PhD degree in Computer Science in 1986 from the University of Rennes, France, at the INRIA-IRISA research institute. I also received the Habilitation degree from the University of Grenoble, France, in march 1995. I was hired in 1989 as First Assistant in the VRLAB, I became scientific collaborator, and senior researcher. I'm presently Senior Scientist (MER) and leader of the Immersive Interaction research Group (IIG). I'm co-author of around 150 research papers among which 43 appeared in international peer-reviewed journals. I have contributed to multiple SNF projects and EU projects. Please check iig.epfl.ch for more details.
Jan Van HerleBorn in Antwerp, Belgium. In Switzerland since 1983. Became Swiss citizen in 2004 out of conviction of principles of democracy and bottom-up participation. No double nationality. Village Council Member for 2 five-year mandates in 2006-2016.
1987 : Chemist from Basel University (CH).
1988 : Post-graduate IT diploma from Basel Engineering School.
1989 : Industry internship ABB Baden (CH).
1990-1993 : PhD Thesis EPFL, on Solid Oxide Fuel Cell cathode reaction mechanisms.
1994-1995 : Japanese Postdoctoral Fellowship in Tsukuba, Japan, on ceramic powders.
1995-2000 : Researcher at EPFL, Dpt. Chemistry : project responsible in PPM2 (materials), FP4-BriteEuram, NEDO (Japan), Swiss Gas Union (CH, oxygen membranes).
1998-2000 : Masters in Energy Technology, EPFL.
2000 : Cofounder of HTceramix SA (EPFL spin-off), now based in Yverdon (14 employees). Taken over by SOLIDpower in 2007, now 250 employees with 70 MCHF raised.
2000 : 1st Assistant and lecturer at LENI (STI-IGM) : fuel cell group responsible, projects on biogas (Federal Energy Office), woodgas (CCEM), fuel cell stacking (CTI, FP6, FNS), ceramic separation membranes (COST, FNS), microtubes (STI Seed), stability/lifetime/reliability in fuel cells (Electricité de France, swisselectric research). Currently 4 Ph D theses ongoing, 14 theses concluded, of which 5 colateral with SB and IMX. M.E.R. since Nov 2008.
Total funding raised so far >18 MCHF (50% as main applicant; 30% outside CH; 20% industry).
Scientific output : >135 peer-reviewed publications, >120 conference papers, 40 invited presentations (8 keynotes), >70 granted proposals.
Fluent in 5 languages (Dutch, French, German ( Swiss-german), English, Spanish).
Guillaume AnciauxResearchResearch Topics My research can be decomposed in three main blocks:First, the main goal of my current research is the physical description of contact interactions. I performed numerous studies of this topic using different models from the continuum scale down to atomistic scale. Since atomic phenomena and macroscopic observations are linked, the physics of contact needs the simultaneous consideration of several scales. For instance, plasticity is a theory defined for the macroscopic scale whereas t
Francesco MondadaDr. Mondada received his M.Sc. in micro-engineering in 1991 and his Doctoral degree in 1997 at EPFL. During his thesis he co-founded the company K-Team, being both CEO and president of the company for about 5 years. He is one of the three main developers of the Khepera robot, considered as a standard in bio-inspired robotics and used by more than 1,000 universities and research centers worldwide. Fully back in research in 2000 and after a short period at CALTECH, he participated to the SWARM-BOTS project as the main developer of the s-bot robot platform, which was ranked on position 39 in the list of The 50 Best Robots Ever (fiction or real) by the Wired Journal in 2006. The SWARM-BOTS project was selected as FET-IST success story by the EU commission. He is author of more than 100 papers in the field of bio-inspired robotics and system level robot design. He is co-editor of several international conference proceedings. In November 2005 he received the EPFL Latsis University prize for his contributions to bio-inspired robotics. In 2011 he received the "Crédit Suisse Award for Best Teaching" from EPFL and in 2012 the "polysphère" award from the students as best teacher in the school of engineering. His interests include the development of innovative mechatronic solutions for mobile and modular robots, the creation of know-how for future embedded applications, and making robot platforms more accessible for education, research, and industrial development.
