Mediaspace scheduled maintenance: Aug 25, 2026 07:00 - 12:00 AM. During this time, videos will be temporarily unavailable. Check status updates.

Concept

Refractory

Related publications (20)

Mechanistic classification and benchmarking of polyolefin depolymerization over silica-alumina-based catalysts

Paul Joseph Dyson, Mounir Driss Mensi, Felix Daniel Bobbink, Antoine Philippe Van Muyden, Wei-Tse Lee, Jed Russell Carullo

Carbon-carbon bond cleavage mechanisms play a key role in the selective deconstruction of alkanes and polyolefins. Here, we show that the product distribution, which encompasses carbon range and formation of unsaturated and isomerization products, serves a ...

Nature Research2022

Liquid metal infiltration of silicon based alloys into porous carbonaceous materials. Part I: Modelling of channel filling and reaction phase formation

Ludger Weber, Manoj Kondibhau Naikade

A relation for an adequate pore fraction needed to obtain residual Si and C free composites via reactive Si-X alloy infiltration is presented. The volume ratio of SiC and carbonaceous phase, the composition of the infiltrating liquid and the apparent densi ...

ELSEVIER SCI LTD2022

Multiscale microshaping of functionally graded polymer-derived SiCN ceramics

Lorenz Hagelüken

Polymer-derived ceramics (PDCs) exhibit excellent properties and are compatible with many shaping techniques due to the liquid character of the preceramic polymers (PCPs). Furthermore, their properties are adjustable by modifying the precursor composition ...

EPFL2022

Evaluation of Total Reactive Oxide Ratios and Working Solution Ratios on Strength Development in Fly Ash-Based Geopolymers

Venkata Prasanna Bhagath Singh Gangapatnam

Fly ash-based geopolymers are being developed as sustainable alternate binders for producing concrete. The consistent production of a stable geopolymeric binder suitable for use in structural applications from alkaline activation of low-calcium fly ash was ...

2020

Tuning the Incorporation of Magnesium into Calcite during Its Crystallization from Additive-Free Aqueous Solution

Esther Amstad, Huachuan Du

Under ambient conditions, marine organisms are able to synthesize a variety of functional materials, ranging from eye lenses to protective shells through the meticulous control over magnesium incorporation into calcite during its crystallization. The mecha ...

AMER CHEMICAL SOC2019

Reactivity and Performance of Limestone Calcined-Clay Cement (LC3) Cured at Low Temperature

Karen Scrivener, Franco Alberto Zunino Sommariva

Limestone calcined-clay cements (LC3) take advantage of the synergetic effects of calcium carbonate reaction with the additional aluminium provided by the calcined clay. As temperature decreases, calcium carbonate solubility increase, therefore, the early- ...

SPRINGER2018

Influence Grinding Procedure, Limestone Content and PSD of Components on Properties of Clinker-Calcined Clay-Limestone Cements Produced by Intergrinding

Karen Scrivener, Albert Perez, Aurélie Rosine Favier

This paper looks at the study of intergrinding for the production of ternary cement based on clinker, calcined clay, limestone and gypsum with 50% of clinker substitution (LC3). The impact of grinding time on clinker, limestone and calcined clay PSD, and h ...

Springer2018

Mechanical properties of MC multimetallic carbides in steel

Lionel Michelet

Carbides constitute a class of materials used for many applications, where excellent mechanical properties, such as stiffness, hardness and fracture toughness, are required. The machining industry is a typical example where carbide are crucial materials. W ...

EPFL2018

Small-scale metal castings, small-scale metal/transparent composite structures and process to produce same

Andreas Mortensen, Yves Bellouard, Raphaël Charvet, Cyril Henri Dénéréaz

The method comprises at least the following steps: - exposing a substrate to focused laser irradiation at a preselected series of locations that trace a subset of the substrate volume that is connected to the surface of the substrate; some subsets of subst ...

2017

Phototransformation of Acesulfame K in surface waters: Comparison of two techniques for the measurement of the second-order rate constants of indirect photodegradation, and modelling of photoreaction kinetics

Stefanos Giannakis

By use of photochemical modelling we show that acesulfame K (ACE) can undergo photodegradation in surface waters, mainly by reaction with (OH)-O-center dot and possibly (CDOM)-C-3* (the triplet states of chromophoric dissolved organic matter). With the pos ...

Elsevier2017

A new quantification method based on SEM-EDS to assess fly ash composition and study the reaction of its individual components in hydrating cement paste

Karen Scrivener, Cyrille Dunant, Mohsen Ben Haha, Pawel Tadeusz Durdzinski

Calcareous fly ashes are high-potential reactive residues for blended cements, but their qualification and use in concrete are hindered by heterogeneity and variability. Current characterization often fails to identify the dominant, most reactive, amorphou ...

Pergamon-Elsevier Science Ltd2015

Alkali Activation of AOD Stainless Steel Slag Under Steam Curing Conditions

Ruben Anton Snellings

Crystalline argon oxygen decarburization slag, in powdery form, was investigated for its hydration potential by alkali activation and curing at 80 degrees C. Na-silicate and K-silicate of the same modulus were used as activators. Isothermal calorimetry at ...

Wiley-Blackwell2015

Thermal boundary conductance between refractory metal carbides and diamond

Ludger Weber, Christian Monachon

The thermal boundary conductance (TBC) between thin films of Cr, Mo, Nb and W and diamond substrates has been measured using time domain thermoreflectance before and after a high-vacuum heat treatment at 800 degrees C for 2 h. While no signs of carbide for ...

Elsevier2014

The Effect of Mg on Slag Reactivity in Blended Cements

Karen Scrivener, Ruben Anton Snellings

Blast-furnace slags are widely used as supplementary cementitious materials in blended cements because of their relatively high reactivity. This study describes the effect of substituting Ca by Mg on the reactivity of synthetic glass with similar compositi ...

Springer2014

Low-cost industrially available molybdenum boride and carbide as “platinum-like” catalysts for the hydrogen evolution reaction in biphasic liquid systems

Hubert Girault, Xile Hu, Kurt Schenk, Heron Vrubel, Véronique Amstutz, Micheal Diarmaid Scanlon

Rarely reported low-cost molybdenum boride and carbide microparticles, both of which are available in abundant quantities due to their widespread use in industry, adsorb at aqueous acid–1,2-dichloroethane interfaces and efficiently catalyse the hydrogen ev ...

Royal Soc Chemistry2013

High Temperature Behavior of Nano-Structured Ceramic Composites Studied by Mechanical Spectroscopy

Mehdi Mazaheri

Silicon nitride based ceramics (SiAlONs); tetragonal polycrystalline zirconia (3Y‐TZP); alumina and their composites reinforced with different amount of multi‐ walled carbon‐nanotubes (CNTs) have been processed by Spark Plasma Sintering (SPS). High tempera ...

EPFL2013

Competitive pumped-storage projects with vertical pressure shafts without steel linings

Anton Schleiss

For the highly loaded pressure tunnels and shafts that are used for the extension of storage power plants with pumped storage and to increase installed capacity, alignments of the waterway system with high overburden are of great importance from the econom ...

Ernst & Sohn Verlag2013

The influence of aluminium on the dissolution of amorphous silica and its relation to alkali silica reaction

Karen Scrivener, Theodor Alexandre Emmanuele Chappex

It is known that the addition of supplementary cementitious materials (SCMs) in concretes reduces or even stops expansion due to alkali silica reaction (ASR). It has been widely shown that the main mechanism controlling ASR in blends is the alkali fixation ...

Pergamon-Elsevier Science Ltd2012

High-temperature mechanical loss and creep behavior of fine-grained zirconia-containing nano-sized reinforcements

Robert Schaller, Claudia Ionascu

Polycrystalline zirconia (3Y-TZP grade) specimens unreinforced and reinforced with multiwalled carbon nanotubes (MWCNTs) or silicon carbide whiskers (SiCws) were processed by powder metallurgy and studied by mechanical spectroscopy. The high-temperature me ...

2009

High temperature mechanical spectroscopy of fine-grained zirconia and alumina containing nano-sized reinforcements

Claudia Ionascu

Polycrystalline zirconia (3Y-TZP grade) unreinforced and reinforced with multiwalled carbon nanotubes (CNTs) or silicon carbide whiskers (SiCw) or silicon carbide particles (SiCp) have been processed and studied by mechanical spectroscopy with complementar ...

EPFL2008