Mediaspace scheduled maintenance: Aug 25, 2026 07:00 - 12:00 AM. During this time, videos will be temporarily unavailable. Check status updates.

Concept

Driven and parasitic elements

Related publications (28)

Light Emission and Conductance Fluctuations in Electrically Driven and Plasmonically Enhanced Molecular Junctions

Christophe Marcel Georges Galland, Wen Chen, Sakthi Priya Amirtharaj, Konstantin Malchow, Zhiyuan Xie

Electrically connected and plasmonically enhanced molecular junctions combine the optical functionalities of high field confinement and enhancement (cavity function), and of high radiative efficiency (antenna function) with the electrical functionalities o ...

Amer Chemical Soc2024

Circularly polarized planar antenna with axially symmetric beamwidth reconfigurability

Anja Skrivervik, Ismael Vico Triviño, Hannes Bartle

This contribution presents the design of a compact circularly polarized antenna featuring beamwidth reconfiguration in both the horizontal and vertical planes. The observed radiation patterns in each of the reconfigurable states present axial symmetry and ...

IEEE2023

Microstrip patch antennas with broad beamwidth

Ismael Vico Triviño

Microstrip antennas offer a broad set of advantages such as low profile, light weight, easy fabrication and low cost. As these are desirable or even critical for a broad range of applications, there has been a large interest for these antennas in the anten ...

EPFL2023

Q-Factor Bounds for Microstrip Patch Antennas

Anja Skrivervik

Antenna bounds are a useful tool in assessing the feasibility or performance of an antenna design. Microstrip patch antennas are often limited by their relatively narrow bandwidth, and therefore Q-factor is an important design parameter, as it is related t ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2023

Enhancing the beamwidth of low profile single-fed microstrip antennas using parasitic elements

Anja Skrivervik, Ismael Vico Triviño

In this paper we present a technique to broaden the beamwidth of conventional patch microstrip antennas by using parasitic elements. This technique allows to keep the main advantages of microstrip antennas while increasing their beamwidth. We provide guide ...

IEEE2022

An Analytical Model for the Prediction of the Maximum Output Voltage Reachable with an Ultra-high Voltage Flyback Converter Driving Capacitive Actuators

Yves Perriard, Alexis Boegli, Raphaël Johannes Charles Mottet

The DC-DC flyback converter is one of the most suitable topologies to generate the voltages necessary to operate Dielectric Elastomer Actuators. Voltages which can range from 5 to 20 kV. Previous works demonstrated through experiments the flyback’s ability ...

IEEE2021

Circularly Polarized Axially Corrugated Feed Horn for CubeSat Reflectarray Applications

Anja Skrivervik, Miroslav Veljovic

Retlectarray (RA) and transmitarray (TA) antennas that use the element-rotation technique require the radiation from the feeding antenna to be circularly polarized (CP). A CP axially corrugated horn antenna is developed as a feeding element for CubeSat RA ...

IEEE2020

2G/3G Serpentine Shape Inverted-F Antenna for Near Body Application

Anja Skrivervik, Nuno Miguel Faria Pires, Mirmehdi Seyyedesfahlan

In this contribution, we present a miniature antenna placed in a leg bracelet for body worn applications. It operates in both the 820-960 MHz and the 1.7-2.1 GHz bands. The radiating element, based on an inverted-F antenna, occupies a 37 mm × 37 mm area an ...

IEEE2019

Broadbeam microstrip patch antenna using higher order modes

Anja Skrivervik, Ismael Vico Triviño

The aim of this contribution is to assess the potential of using various microstrip radiating elements excited with different modes to achieve wide pattern beamwidths. The proposed antenna is made in classic microstrip technology and consists of a circular ...

The European Association on Antennas and Propagation (EurAAP)2019

Engineered acoustic mismatch for anchor loss control in contour mode resonators

Luis Guillermo Villanueva Torrijo, Annalisa De Pastina, Andrea Lozzi

Improving the quality factor (Q) of electromechanical resonators is of paramount importance for different applications, ranging from RF filtering to sensing. In this paper, we present a modified fabrication process flow for contour mode resonators to simul ...

2019

Spatial coherence properties of an LED-based illumination system for mask-aligner lithography

Hans Peter Herzig, Toralf Scharf, Wilfried Noell, Raoul Kirner, Johana Bernasconi

A high-power LED-based illumination system has been developed as a replacement for the mercury arc lamps used in mask-aligner lithography. LEDs are arranged in a grid array and placed in the entrance aperture of individual reflectors. Those reflectors decr ...

SPIE2019

Numerical analysis of fragmentation in tempered glass with parallel dynamic insertion of cohesive elements

Jean-François Molinari, Mauro Corrado, Marco Vocialta

Tempered glass panes are subjected to high eigenstresses that induce a state of compression along the surfaces and a state of tension in the inner part. Whenever a crack reaches the tensile region, it rapidly propagates and branches in all directions drive ...

2018

The effect of overall stimulus configuration on crowding

Michael Herzog, Maya Roinishvili, Mattew Pachai

The standard framework to study vision is typically hierarchical and feedforward, which facilitates deconstructing complex mechanisms into smaller, more tractable problems. However, this framework can fail when elements are presented in context, as they ar ...

2017

Electronic solutions for power system emulation

Guillaume Olivier Lanz

Nowadays electric power systems are subject to continuous changes and the needs in the power generation and delivery service are constantly increasing, with a higher complexity of a progressively more distributed network. Because the impact of a failure ca ...

EPFL2017

Design of an Efficient High Power Electromagnetic Radiator using a Yagi-Uda Antenna Connected to a Switched Ocillator

Farhad Rachidi-Haeri

We propose in this paper the use of a monopolar version of the Yagi-Uda antenna connected to a switched oscillator (SWO). At the resonance frequency, this antenna offers a higher impedance than, for example, a Half Impulse Radiating Antenna (HIRA), a helic ...

Ieee2016

Design of novel radiating elements for SATCOM phased arrays in Ku-Band

Baptiste Fernand Hornecker

The present thesis deals with the design of a planar antenna array for the communication between a civil aircraft (Dassault's Falcon) and an Inmarsat satellite. The final goal is to provide high speed Internet access in X/Ku-Band (8-12GHz / 12-18GHz), and ...

EPFL2016

GaAs nanowires: from doping to plasmonic hybrid devices

Alberto Casadei

Semiconductor nanowires (NWs) are filamentary crystals with the diameter ranging from few tens up to few hundreds of nanometers. In the last 20 years, they have been intensively studied for the prospects that their unique quasi-one dimensional shape offers ...

EPFL2016

Predicting Input Impedance and Efficiency of Graphene Reconfigurable Dipoles Using a Simple Circuit Model

Julien Perruisseau-Carrier, Michele Tamagnone

An analytical circuit model able to predict the input impedance of reconfigurable graphene plasmonic dipoles is presented. A suitable definition of plasmonic characteristic impedance, employing natural currents, is used to for consistent modeling of the an ...

Institute of Electrical and Electronics Engineers2014

Frequency, Radiation Pattern and Polarization Reconfigurable Antenna Using a Parasitic Pixel Layer

Daniel Rodrigo Lopez

This communication presents a reconfigurable antenna capable of independently reconfiguring the operating frequency, radiation pattern and polarization. A switched grid of small metallic patches, known as pixel surface, is used as a parasitic layer to prov ...

Ieee-Inst Electrical Electronics Engineers Inc2014

Analysis of resonant planar dissipative network antennas for rf inductively coupled plasma sources

Christoph Hollenstein, Alan Howling, Philippe Frédérique Bruno Guittienne

The analysis of a radio-frequency (RF) planar antenna is presented for applications in plasma processing. The antenna is a network of elementary meshes composed of inductive and capacitive elements which exhibits a set of resonant modes. The high currents ...

Iop Publishing Ltd2014