Publications related to Molar volume

Related publications (20)

An in-situ 3D micro-XRD investigation of water uptake by alkali-silica-reaction (ASR) product

The ASR products in concrete have various chemical compositions. It is yet unclear whether and how these products develop micro-expansion upon moisture ingress. This paper presents a 3D in-situ observation of the crystallography and volume change of an ASR ...

Pergamon-Elsevier Science Ltd2021

The underappreciated role of nonvolatile cations in aerosol ammonium-sulfate molar ratios

Athanasios Nenes, Hairun Guo

Overprediction of fine-particle ammonium-sulfate molar ratios (R) by thermodynamic models is suggested as evidence for interactions with organic constituents that inhibit the equilibration of gas-phase ammonia with aerosol sulfate and questions the equilib ...

Copernicus Publications2018

Experimental investigation of the sloshing motion of the water free surface in the draft tube of a Francis turbine operating in synchronous condenser mode

François Avellan, Arthur Tristan Favrel, Loïc Andolfatto, Elena Vagnoni

Hydropower units may be required to operate in condenser mode to supply reactive power. In this operating mode, the water level in the turbine or pump-turbine is decreased below the runner by closing the guide vanes and injecting pressurized air. While ope ...

2018

Three-dimensional phase-field study of grain coarsening and grain shape accommodation in the final stage of liquid-phase sintering

Liesbeth Maria L Vanherpe

A 3-dimensional phase-field model is implemented to simulate the grain evolution in the final stage of liquid-phase sintering. The model considers a liquid phase and a polycrystalline solid phase. Results for varying ratios of the solid-solid interface ene ...

Elsevier Sci Ltd2017

Water retention behaviour of compacted bentonites: experimental observations and constitutive model

Anne-Catherine Adolphine M Dieudonné

Bentonite-based materials are studied as potential barriers for the geological disposal of radioactive waste. In this context, the hydro-mechanical behaviour of the engineered barrier is first characterized by free swelling conditions followed by constant ...

EDP Sciences2016

Measurement of Mechanical Coherency Temperature and Solid Volume Fraction in Al-Zn Alloys Using In Situ X-ray Diffraction During Casting

Jean-Marie Drezet, Güven Kurtuldu, Bastien Gilbert Pierre Mireux

During solidification of metallic alloys, coalescence leads to the formation of solid bridges between grains or grain clusters when both solid and liquid phases are percolated. As such, it represents a key transition with respect to the mechanical behavior ...

Springer Verlag2015

In situ X-ray Diffraction during Casting: Study of Hot Tearing in Al-Zn alloys

Jean-Marie Drezet, Güven Kurtuldu, Bastien Gilbert Pierre Mireux

During solidification of metallic alloys, coalescence corresponds to the formation of solid bridges between grains when both solid and liquid phases are percolated. As such, it represents a key transition with respect to the mechanical behaviour of solidif ...

Trans Tech Publications Switzerland2015

Solid Solutions of Lead Metaniobate-Stabilization of the Ferroelectric Polymorph and the Effect on the Lattice Parameters, Dielectric, Ferroelectric, and Piezoelectric Properties

Nava Setter, Dragan Damjanovic, Alberto Biancoli, Barbara Maraston Fraygola

Ferroelectric orthorhombic lead metaniobate (PbNb2O6) is known to be metastable with respect to the thermodynamically stable nonferroelectric rhombohedral polymorph. The high-temperature tetragonal to low temperature rhombohedral phase transition is recons ...

Wiley-Blackwell2014

On the relevance of volume increase for the length changes of mortar bars in sulfate solutions

Karen Scrivener

The ingress of sulfate ions into cementitious materials leads to the formation of ettringite, gypsum and other phases. The increase in solid volume through the formation of these phases is often assumed to be the only reason for expansion. In this paper we ...

Pergamon-Elsevier Science Ltd2013

Synthesis and Properties of Highly-Charged Cationic Polyelectrolytes

Hamideh Ahmadloo

Polyelectrolytes (PEL) and PEL complexes formed by electrostatic interaction are recognized as compounds with a remarkable potential for a wide field of applications. However, comprehensive knowledge about electrostatic and structural influences on the pol ...

EPFL2013

Synthesis and photopolymerization of Tween 20 Methacrylate/N-vinyl-2-Pyrrolidone blend

Jan-Anders Edvin Maansson, Dominique Pioletti, Pierre-Etienne Bourban, John Christopher Plummer, Ana Borges de Couraça

Poly(oxyethylene 20 sorbitan) monolaurate (Tween® 20) methacrylates were synthesized by coupling methacryloyl chloride (MeOCl) to Tween 20 in the presence of 4-(N,N-dimethylamino) pyridine, using THF as a solvent, in order to investigate their suitability ...

Elsevier Science Bv2012

Effects of extraction methods on the composition and molar mass distributions of exopolymeric substances of the bacterium Sinorhizobium meliloti

Vera Slaveykova-Startcheva

The influence of the extraction methods on the composition, size diversity, molar mass and size distributions of exopolymeric substances (EPS) from the bacterium Sinorhizobium meliloti wild type (WT) and by the exoY strain deficient in exopolysaccharide pr ...

Elsevier2012

Investigation of Sulfate Attack by Experimental and Thermodynamic Means

This work investigates sulfate attack in complex sulfate environments by exposing different binder types to various sulfate solutions and comparing predicted phase and volume changes with experimental data. The most important aspects of this work can be gr ...

EPFL2012

The role of aquatic reservoir fluctuations in long-term cholera patterns

Andrea Rinaldo, Enrico Bertuzzo, Lorenzo Mari, Lorenzo Righetto

We propose and analyze an important extension of standard cholera epidemiological models, explicitly accounting for fluctuations of water availability to the human community under study. The seasonality of water input in the reservoir drives the variation ...

2012

Determination of a scale-up factor from mixing time studies in orbitally shaken bioreactors

Christos Comninellis, Florian Maria Wurm, Mohamed Farhat, David Hacker

Efficient mixing in bioreactors is essential in order to avoid concentration gradients which can be harmful for mammalian cells. To study mixing and its scalability in orbitally shaken cylindrical bioreactors, we measured mixing times in containers with no ...

Elsevier2010

Numerical Simulation of Nonlinear Self Oscillations of a Full Load Vortex Rope

François Avellan, Christophe Nicolet, Pierre Maruzewski, Vlad Hasmatuchi, Sébastien Alligné, Nicolas Ruchonnet

Self excited instabilities or oscillations of a cavitating full load vortex rope occur due to an interaction between the gas volume and the acoustic waves. From the onset of the oscillations, the amplitudes grow until they reach a maximum, called the “limi ...

2009

Structure and thermal stability of arc evaporated (Ti0.33Al0.67)(1-x)SixN thin films

(Ti0.33Al0.67)(1-x)SixN (0

2008

Effect of interatomic potential on the behavior of dislocation-defect interaction simulation in α-Fe

Robin Schäublin, Seyed Masood Hafez Haghighat

Molecular dynamics simulation is one of the most useful methods to model defect generation and subsequent change in mechanical properties in material that will suffer irradiation in the future fusion reactors. This work is aimed at showing the influence of ...

2008

Adsorption of Superplasticizers on a Model Powder

Paul Bowen, François Perche

Adsorption isotherms of carboxylate type superplasticizers with different architectures have been measured on MgO considered as a non-reactive model powder. This system allowed us to study the influence of pH, electrolyte type, concentration and ionic stre ...

Conseil national de recherches du Canada2007

An improved volume measurement for determining soil water retention curve

Lyesse Laloui, Hervé Péron

The complete determination of soil water retention curve requires the sample volume to be measured, in order to calculate its void ratio and saturation degree. During drying in the pressure plate apparatus, cracks often appear in the sample altering its de ...

2007