Mediaspace scheduled maintenance: Aug 25, 2026 07:00 - 12:00 AM. During this time, videos will be temporarily unavailable. Check status updates.

Concept

Flexible display

Related publications (29)

HASPIDE: a project for the development of hydrogenated amorphous silicon radiation sensors on a flexible substrate

Giovanni De Cesare, Sylvain Dunand, Luca Massimiliano Antognini, Jonathan Emanuel Thomet

Hydrogenated amorphous silicon (a-Si:H) is a material with a very good radiation hardness and with the possibility of deposition on flexible substrates like Polyimide (PI). Exploiting these properties, the HASPIDE (Hydrogenated Amorphous Silicon PIxels DEt ...

Iop Publishing Ltd2024

Tumescense monitoring system for diagnosing erectile dysfunction and methods of use

Nikolaos Stergiopoulos, Rodrigo Araujo Fraga Da Silva

Systems and methods for monitoring penile tumescence are provided that overcome the drawbacks of previously known systems by providing a wearable formed of a flexible and elastic tube having a plurality of sensors disposed on or embedded within it, the wea ...

2023

X-ray qualification of hydrogenated amorphous silicon sensors on flexible substrate

Nicolas Würsch, Luca Massimiliano Antognini, Sylvain Dunand

Hydrogenated amorphous silicon (a-Si:H) is a well known material for its radiation resistance and for the possibility of deposition on flexible substrates like Polyimide (PI), polyethylene terephthalate (PET) or polyethylene naphthalate (PEN). Due to the p ...

IEEE2023

Drift-Diffusion Simulations of Charge Transport and Trap Dynamics in Organic Semiconductor Materials

Camilla Arietta Vael-Garn

Polymeric semiconductors have gained significant attention in the field of organic electronics due to their unique properties and potential applications. Through their ability to transport charge carriers and to absorb or emit light, they have attracted mu ...

EPFL2023

Method for Design Materialization (MDM) for artists, educators and archivists: an introduction

Cyrus Thibault Lognonné

This contribution argues for the potential of Barr, Khaled and Lessard’s Method for Design Materialization (MDM) as a research through design tool that is specifically suited for new media preservation. Building moreover from the ISEA first and second Summ ...

2023

Modulating the Surface Properties of Lithium Niobate Nanoparticles by Multifunctional Coatings Using Water-in-Oil Microemulsions

Sandrine Gerber, Alessandra Spada, Adrian Stefan Gheata

Inorganic nanoparticles (NPs) have emerged as promising tools in biomedical applications, owing to their inherent physicochemical properties and their ease of functionalization. In all potential applications, the surface functionalization strategy is a key ...

2023

Low-temperature and rapid photo-annealing process for metal-oxide thin-film transistors using combined excimer deep-ultraviolet and intensely pulsed light irradiation

Jaemin Kim

The fabrication of high-performance metal-oxide-based thin-film transistors (TFTs) on flexible and transparent polymer substrates by solution processes has garnered substantial interest, particularly for manufacturing flex-ible electronics. However, the an ...

ELSEVIER2022

Groove: Flexible Metadata-Private Messaging

Ludovic Barman, David Lazar

Metadata-private messaging designs that scale to support millions of users are rigid: they limit users to a single device that is online all the time and transmits on short regular intervals, and require users to choose precisely when each of their buddies ...

Usenix Assoc2022

Sequential manufacturing via intra-additive hybrid materials approach for fully roll-to-roll processed flexible organic thin film transistors

Jaemin Kim

Conventional conductive films that are used as electrodes in organic thin film transistors (OTFTs) are susceptible to mechanical deformation, limiting the applicability of such films in flexible wearable electronic devices. To address this limitation, a hy ...

ELSEVIER SCI LTD2021

High speed, complex wavefront shaping using the digital micro-mirror device

Demetri Psaltis

Digital micro-mirror devices (DMDs) have been deployed in many optical applications. As compared to spatial light modulators (SLMs), they are characterized by their much faster refresh rates (full-frame refresh rates up to 32 kHz for binary patterns) compa ...

Nature Portfolio2021

Recent progress in silk fibroin-based flexible electronics

Jürgen Brugger, Xiao Sheng Zhang, Ya Wang

With the rapid development of the Internet of Things (IoT) and the emergence of 5G, traditional silicon-based electronics no longer fully meet market demands such as nonplanar application scenarios due to mechanical mismatch. This provides unprecedented op ...

2021

Ion and Trap Induced Dynamic Phenomena in Salt Semiconductor Devices

Matthias Diethelm

State-of-the-art organic light-emitting diodes (OLEDs) used in commercial display technology are complex multilayer structures. In contrast, the light-emitting electrochemical cell (LEC) can be built from a single emissive layer sandwiched between two elec ...

EPFL2021

Second harmonic generation in glass-based metasurfaces using tailored surface lattice resonances

Olivier Martin, Fabien Sorin, Jérémy Butet, Wei Yan, Kuang-Yu Yang, Dang Tùng Nguyen, Andreas Leber, Chaoqun Dong

Dielectric metasurfaces have shown prominent applications in nonlinear optics due to strong field enhancement and low dissipation losses at the nanoscale. Chalcogenide glasses are one of the promising materials for the observation of nonlinear effects than ...

2021

In-situ laser sintering for the fabrication of fully 3D printed electronics composed of elastomeric materials

Danick Briand, Rubaiyet Iftekharul Haque, Sébastien Lani, Ryan Mitchell van Dommelen

In-situ laser sintering can be used to locally sinter conductive inks in an uninterrupted process, enabling the embedding of printed electronics within 3D printed structures. In this work we apply a laser sintering method to create highly conductive silver ...

2021

p-NiO junction termination extensions for GaN power devices

Elison de Nazareth Matioli, Riyaz Mohammed Abdul Khadar, Alessandro Floriduz, Taifang Wang

We report the demonstration of p-NiO layers as junction termination extensions (JTEs) for realizing high-performance GaN power devices. The p-NiO was deposited by RF sputtering, a flexible process which enables to achieve high hole densities. In this work, ...

IOP PUBLISHING LTD2021

Synthesis of NIR-Absorbing Squaraine Dyes and their Use in Organic Upconversion Devices

Karen Verena Strassel

Squaraines are organic dyes showing the advantages of a simple synthesis, high absorption coefficients and tunable bandgaps from the visible to the near-infrared (NIR) region. Their molecular structure is based on a polymethine chain and a donor-acceptor-d ...

EPFL2021

Polysulfone Dispersed Liquid Crystals As Promising Materials For Flexible Substrates Of Organic Light Emitting Diodes

Maria-Alexandra Paun

The paper deals with the preparation and investigation of a series of polymer dispersed liquid crystals (PDLCs) based on polysulfone matrix and an azomethine liquid crystal. The PDLC systems were prepared by thermal induced phase separation method. Their m ...

UNIV POLITEHNICA BUCHAREST, SCI BULL2021

Deep-UV approaches and printing of indium zinc oxide thin-film transistors targeting their processing on thermosensitive substrates

Alessio Mancinelli

Novel metal-oxides (MOx) semiconductors for thin-film transistors (TFTs) are being developed as they can offer superior electric performances over organic-based counterparts. MOx TFTs processed on foil could be exploited in smart labels as RFID and NFC tag ...

EPFL2021

Reciprocal Metasurfaces for On-axis Reflective Optical Computing

Romain Christophe Rémy Fleury, Karim Achouri, Ali Momeni

Analog computing has emerged as a promising candidate for real-time and parallel continuous data processing. This paper presents a reciprocal way for realizing asymmetric optical transfer functions (OTFs) in the reflection side of the on-axis processing ch ...

2021

Taking a snapshot of the triplet excited state of an OLED organometallic luminophore using X-rays

Andrea Cannizzo, Giulia Fulvia Mancini, Camila Bacellar Cases Da Silveira, Victoria Kabanova

OLED technology beyond small or expensive devices requires light-emitters, luminophores, based on earth-abundant elements. Understanding and experimental verification of charge transfer in luminophores are needed for this development. An organometallic mul ...

Nature Publishing Group2020