Mediaspace scheduled maintenance: Aug 25, 2026 07:00 - 12:00 AM. During this time, videos will be temporarily unavailable. Check status updates.

Concept

Lumber

Related publications (23)

Robotic Assembly of Integrally-Attached Timber Plate Structures: From Computational Design to Automated Construction

Nicolas Henry Pierre Louis Rogeau

The digitization of timber construction, the emergence of engineered wood products, and the urgent need to drastically reduce buildings' environmental impact have given a rebirth to wood as a construction material. On the one hand, increasing the use of ti ...

EPFL2023

Environmental and Life-Cycle Cost Evaluation of a Composite Timber-UHPFRC Bridge

Eugen Brühwiler, Numa Joy Bertola

Ultra-High-Performance Fibre Reinforced Cementitious Composite (UHPFRC) has recently been used to design lightweight structures and strengthen existing ones, with more than 300 applications in Switzerland. Several composite timber-UHPFRC bridges have been ...

2023

Numerical simulations of retrofitting interventions on timber floors in unreinforced masonry

Katrin Beyer, Igor Tomic, Ivana Bozulic

Unreinforced masonry buildings with flexible timber floors are amongst the most vulnerable building typologies for seismic loading. Though flexible diaphragms play a role in the seismic behaviour of unreinforced masonry buildings, the impact of the connect ...

2022

A Collaborative Workflow to Automate the Design, Analysis, and Construction of Integrally-Attached Timber Plate Structures

Yves Weinand, Aryan Rezaei Rad, Petras Vestartas, Nicolas Henry Pierre Louis Rogeau

This paper introduces a computational framework that fosters collaboration between architects, engineers, and contractors by bridging the gap between architectural design, structural analysis, and digital construction. The present research is oriented towa ...

CAADRIA2022

Design-to-Fabrication Workflow for Raw-Sawn-Timber using Joinery Solver

Petras Vestartas

Currently, the Swiss timber industry in mountain areas largely exports unprocessed lumber and imports finished timber products due to the lack of digital tools. By using new digital design-to-production workflows, it is possible to investigate new building ...

EPFL2021

Structural design methodology in Integrally-Attached Timber Plate structures

Aryan Rezaei Rad, Petras Vestartas

The immediate application of research discoveries requires a global and exact understanding of the structure under consideration. To gain insight into the complex behavior of structures, numerical simulations are carried out in parallel to physical experim ...

Routledge, Taylor & Francis Group2021

Design of Integrally-Attached Timber Plate Structures

Yves Weinand

Design of Integrally-Attached Timber Plate Structures outlines a new design methodology for digitally fabricated spatial timber plate structures, presented with examples from recent construction projects. It proposes an innovative and sustainable design me ...

Routledge, Taylor & Francis Group, London, 20222021

An integrated design tool for timber plate structures to generate joints geometry, fabrication toolpath, and robot trajectories

Yves Weinand, Nicolas Henry Pierre Louis Rogeau

This paper presents an integrated design tool for structures composed of engineered timber panels that are connected by traditional wood joints. Recent advances in computational architecture have permitted to automate the fabrication and assembly of such s ...

2021

Macro Modeling Technique for Integrally-Attached Timber Plates: Sensitivity Analysis

Yves Weinand, Aryan Rezaei Rad

Using the Integral Mechanical Attachment (IMA) technique, a new macroscopic model has recently been introduced to simulate the structural behavior of segmented timber plates. The macro model is based on employing only beam and spring elements, which aims t ...

2021

Joinery Solver for Whole Timber Structures

Yves Weinand, Petras Vestartas

This paper presents a digital joinery generation method for whole-timber structures using wood-wood connections. The research is based on a collaboration with a local timber company located in a mountain area [1]. In this context, there is a need to explor ...

2020

Development of Novel Standardized Structural Timber Elements Using Wood-Wood Connections

Julien Gamerro

Traditional wood-wood connections, widely used in the past, have been progressively replaced by steel fasteners and bonding processes in modern timber constructions. However, the emergence of digital fabrication and innovative engineered timber products ha ...

EPFL2020

Characterization of mortar-timber and timber-timber cyclic friction in timber floor connections of masonry buildings

Katrin Beyer, João Saraiva Esteves Pacheco de Almeida

The seismic performance of buildings depends critically on the stiffness and strength of storey diaphragms. Whilst for modern reinforced concrete or steel structures the connection between floors and lateral resisting members is often assumed as monolithic ...

SPRINGER2020

Experimental investigation of mesoscale variability of clear spruce mechanical properties in the radial direction

Thomas Keller, Anastasios Vassilopoulos, Alireza Farajzadeh Moshtaghin

The aim of this work is the investigation of mesoscale/local variability in mechanical properties of clear timber in the radial direction. Clear Norway spruce wood, Picea abies, was used for cutting specimens of different lengths with a small cross-section ...

2020

Experimental investigations on the load-carrying capacity of digitally produced wood-wood connections

Yves Weinand, Julien Gamerro, Jean-François Bocquet

The rise of digital fabrication has increased the use of wood-wood connections inspired by traditional carpentry in modern timber constructions. With recent developments on standard construction systems, the mechanical behavior of such joints for in-plane ...

2020

Robotic Insertion of Timber Joints using Visual Detection of Fiducial Markers

Yves Weinand, Nicolas Henry Pierre Louis Rogeau

Timber building industry is facing a major transformation with digitalization and automation being more broadly adopted. Prefabricated timber frame structures can be mass-produced on large robotic assembly lines, increasing the productivity and competitive ...

2020

Mechanical Characterization of Integrally-Attached Timber Plate Structures: Experimental studies and macro modeling technique

Aryan Rezaei Rad

Spurred by the recent advancements in Computer-Aided Design (CAD), Integral Mechanical Attachment (IMA) technique has been resurrected. Using IMAs, connections between timber elements are established through their form, instead of using additional connecto ...

EPFL2020

Modelling Workflow for Segmented Timber Shells using Wood-wood Connections

Yves Weinand, Julien Gamerro, Petras Vestartas, Nicolas Henry Pierre Louis Rogeau

This paper presents a modelling method based on planarization for double-curved segmented timber shell made from quad polygons and assembled by wood-wood connections. The inspiration is taken from timber dome structures, where solid timber walls were built ...

Springer2019

Modern timber design approaches for traditional Japanese architecture: analytical, experimental, and numerical approaches for the Nuki joint

Corentin Jean Dominique Fivet, Jan Friedrich Georg Brütting

This work fully investigates a specific timber joinery connection via experimental, analytical, and numerical methods. The selected joint is the Nuki joint: a mortised column with through-beam tenon. The experimental approach takes advantage of digital fab ...

International Center for Numerical Methods in Engineering (CIMNE)2019

Development of a Spring Model for the Structural Analysis of a Double-Layered Timber Plate Structure with Through-Tenon Joints

Yves Weinand, Anh Chi Nguyen

Timber plate structures with integral mechanical attachments have been successfully built in the last decades. Previous research has highlighted the influence of these connections in the global behavior of the structures. Double-layered plate shells are on ...

World Conference of Timber Engineering2018

Reconsidering traditional timber joinery for sustainable structures

Corentin Jean Dominique Fivet, Jan Friedrich Georg Brütting

Timber construction plays an important role in architectural history, in modern construction methods and in sustainable design, for which wood-only joinery techniques have been used for centuries. Traditional joinery typologies are the product of successiv ...

2018