Mediaspace scheduled maintenance: Aug 25, 2026 07:00 - 12:00 AM. During this time, videos will be temporarily unavailable. Check status updates.

Concept

Electroplating

Related publications (32)

Microstructure - Electrochemical Surface Reactivity Relationship of Electrochemically Grown Manganese Oxides Films

Roberto Cestaro

This Thesis provides a comprehensive and correlative investigation of the microstructure, chemical state, and electrochemical reactivity of manganese oxide (MnOx) films, aiming to gain a deeper understanding of the deposition and dissolution mechanism of M ...

EPFL2024

Artificial Hydrophilic Organic and Dendrite-Suppressed Inorganic Hybrid Solid Electrolyte Interface Layer for Highly Stable Zinc Anodes

Lei Zhang, Kangning Zhao

Aqueous zinc-ion batteries (AZIBs) have gained significant attentions for their inherent safety and cost-effectiveness. However, challenges, such as dendrite growth and anodic corrosion at the Zn anode, hinder their commercial viability. In this paper, an ...

Amer Chemical Soc2024

Size dependence of second-harmonic scattering from nanoparticles: Disentangling surface and electrostatic contributions

Sylvie Roke, Arianna Marchioro, Bingxin Chu

Polarimetric angle-resolved second-harmonic scattering (AR-SHS) is an all-optical tool enabling the study of unlabeled interfaces of nano-sized particles in an aqueous solution. As the second harmonic signal is modulated by interference between nonlinear c ...

AIP Publishing2023

Transparent Porous Conductive Substrates for Gas-Phase Photoelectrochemical Hydrogen Production

Kevin Sivula, Jun Ho Yum, Simon Nussbaum, Rebekah Anne Wells, Marina Caroline Michèle Caretti, Hannah Elizabeth Johnson, Emeline Cécile Rideau, Benjamin Goldman, Elizaveta Potapova Mensi

Gas diffusion electrodes are essential components of common fuel and electrolysis cells but are typically made from graphitic carbon or metallic materials, which do not allow light transmittance and thus limit the development of gas-phase based photoelectr ...

Wiley-V C H Verlag Gmbh2023

Natural aging and vacancy trapping in Al-6xxx

William Curtin, Michele Ceriotti

Undesirable natural aging (NA) in Al-6xxx delays subsequent artificial aging (AA) but the size, composition, and evolution of clustering are challenging to measure. Here, atomistic details of early-stage clustering in Al-1% Mg-0.6%Si during NA are studied ...

Springer Heidelberg2023

Colloidal transport and deposition through dense vegetation

David Andrew Barry, Li Chen

The effectiveness of submerged synthetic aquatic vegetation on removal of colloids from flowing water was investigated to explore retention of particulate nonpoint source pollutants in aquatic systems. In colloid transport experiments, the deposition rate ...

Elsevier2022

Two-Dimensional Organic-Inorganic Heterostructure as a Multifunctional Protective Layer for High Performance Zinc Metal Anode

Kangning Zhao

Dendrite growth and side reactions of Zn metal anodes remain unresolved obstacles for practical application of aqueous Zn ion batteries. Herein, a two-dimensional (2D) organic-inorganic heterostructure with controlled thickness was constructed as a protect ...

AMER CHEMICAL SOC2023

A mixture model to take into account diluted gas in liquid flow: applications to aluminium electrolysis

Emile Tryphon Pierre Soutter

Aluminium is a metal sought in the industry because of its various physical properties. It is produced by an electrolysis reduction process in large cells. In these cells, a large electric current goes through the electrolytic bath and the liquid aluminium ...

EPFL2022

The Michelangelo step: removing scalloping and tapering effects in high aspect ratio through silicon vias

Edoardo Charbon, Sandro Carrara, Simone Frasca, Rebecca Camilla Leghziel, Benoît Bruno Pasquier

We present here, for the first time, a fabrication technique that allows manufacturing scallop free, non-tapered, high aspect ratio in through-silicon vias (TSVs) on silicon wafers. TSVs are among major technology players in modern high-volume manufacturin ...

Nature Research2021

Stainless steel-like FeCrNi nanostructures via electrodeposition into AAO templates using a mixed-solvent Cr(III)-based electrolyte

Enrico Bertero

Electrodeposition of stainless steel-like materials such as FeCrNi alloy into micro- and nanotemplates provides a sustainable framework for creating biomedical-oriented micro- and nanocomponents with outstanding characteristics. While Cr(III)-based electro ...

2020

Tribological behaviour of galvanic gold coatings reinforced with silica nanoparticles

Stefano Mischler, Anna Neus Igual Muñoz

Electroplated composite Au/SiO2 coatings on a nickel substrate have been produced by dispersing an emulsion of silica nanoparticles (20 nm in diameter) in an industrial hard-gold bath. The tribological behaviour of the Au/SiO2 coatings with different SiO2 ...

2020

Fretting-corrosion behavior of electroless Ni-P/Ni-P-TiO2 coatings obtained on AZ91D magnesium alloy by a chromium-free process

Stefano Mischler, Angela Bermudez Castañeda

Ni-P electroless coatings are widely applied for protection of magnesium alloys and other materials due to the low energy consumption of the process and high resistance to corrosion and wear, properties that can be improved with the incorporation of partic ...

ELSEVIER2020

Synergistic Cu/CeO2 carbon nanofiber catalysts for efficient CO2 electroreduction

Andreas Züttel, Wen Luo, Jie Zhang

The electrochemical reduction of carbon dioxide (CO2RR) has attracted enormous interest because of the energy crisis and climate change; however, more efficient catalysts are required for practical applications. Herein, we present electrospinning as a faci ...

Elsevier2020

Reproducibility warning: The curious case of polyethylene glycol 6000 and spheroid cell culture

Francesco Stellacci, Quy Ong Khac, Zhi Luo, Ahmet Bekdemir

Reproducibility of results is essential for a well-designed and conducted experiment. Several reasons may originate failure in reproducing data, such as selective reporting, low statistical power, or poor analysis. In this study, we used PEG6000 samples fr ...

2020

Electrochemical and morphological engineering of 2D materials for nanopore sensing

Martina Lihter

Nanopores are nanometer-sized holes that were initially proposed for DNA sequencing. Several years ago sequencing was made possible with biological nanopores. However, solid-state nanopores have plenty of advantages to offer compared to their biological co ...

EPFL2020

'Green' Cr(III)-based electrodeposition of stainless steel-like FeCrNi: synthesis, mechanisms, material properties of films and micro-nanocomponents for bio-medical applications

Enrico Bertero

The electrodeposition (ED) of stainless steel (SS) -like FeCrNi alloys for miniaturised devices is appealing for bio-medicine as it would allow combining excellent material properties (e.g. corrosion resistance, hardness, bio-compatibility) at low-cost. Ho ...

EPFL2020

Oxidative Print Light Synthesis Thin Film Deposition of Prussian Blue

Hubert Girault, Emad Oveisi, Mounir Driss Mensi, Victor Costa Bassetto, Wanderson Oliveira Da Silva, Dominika Baster

Prussian blue (PB) and Prussian blue analogues (PBAs) are commonly synthesized by conventional methods, such as chemical precipitation, thermal decomposition, and electrochemical deposition. Herein, we have successfully synthesized Prussian blue by oxidati ...

2020

Vanadium‐manganese redox flow battery: Study of Mn(III) disproportionation in the presence of other metallic ions

Hubert Girault, Pekka Eero Peljo, Danick Reynard, Sunny Isaïe Maye, Solène Cindy Gentil

The Mn(III)/Mn(II) redox couple with a standard potential of +1.51 V vs . SHE has drawn interest for the design of V/Mn redox flow battery (RFB). However, Mn(III) disproportionation leads to a loss of capacity, an increase of pressure drop and electrode pa ...

Wiley2020

Highly efficient, stable and hysteresis-less planar perovskite solar cell based on chemical bath treated Zn2SnO4 electron transport layer

Michael Graetzel, Ulf Anders Hagfeldt, Wolfgang Richard Tress, Zaiwei Wang, Seckin Akin, Marco Alejandro Ruiz Preciado

The electron transport layer (ETL) is a key constituent in perovskite solar cells (PSCs). It should provide efficient and selective electron extraction, low resistivity and high stability. Here, zinc stannate (Zn2SnO4, ZSO) is employed as an ETL in planar ...

Elsevier2020

Progress in Violet Light-Emitting Diodes Based on ZnO/GaN Heterojunction

Eric Feltin

Progress in light-emitting diodes (LEDs) based on ZnO/GaN heterojunctions has run into several obstacles during the last twenty years. While both the energy bandgap and lattice parameter of the two semiconductors are favorable to the development of such de ...

MDPI2020