Andrea CavallaroExpertise
I focus on machine learning for audio-visual sensing to enable systems to serve agreed purposes and improve their abilities through interactions with the environment, with other systems and with people. The goal of my research is to create the next-generation machine perception models for the effective use of sensory data, and the safe operation of autonomous systems that gain information about their environment and make decisions in partnership with humans or independently. These models are trans
Yves BellouardDr. Yves Bellouard is Associate Professor in Microengineering at Ecole Polytechnique Fédérale de Lausanne (EPFL) in Switzerland, where he heads the Galatea lab and the Richemont Chair in micromanufacturing. He received a BS in Theoretical Physics and a MS in Applied Physics from Université Pierre et Marie Curie in Paris, France in 1994-1995 and a PhD in Microengineering from Ecole Polytechnique Fédérale de Lausanne (EPFL) in Lausanne, Switzerland in 2000. For his PhD work, he received the Omega Scientific prize (2001) for outstanding contribution in the field of microengineering for his work on Shape Memory Alloys. Before joining EPFL in 2015, he was Associate Professor at Eindhoven University of Technologies (TU/e) in the Netherlands and prior to that, Research Scientist at Rensselaer Polytechnic Institute (RPI) in Troy, New York for about four years where he started working on femtosecond laser processing of glass materials. From 2010 until 2013, Yves Bellouard initiated and coordinated the Femtoprint project, a European research initiative aiming at investigating a table-top printer for microsystems ('3D printing of microsystems'). In 2013, he received a prestigious ERC Starting Grant (Consolidator-2012) from the European Research Council and a JSPS Fellowship from the Japan Society for the Promotion of Science. His current research interests are on new paradigms for system integration at the microscale and in particular laser-based methods to tailor material properties for achieving higher level of integration in microsystems, like for instance integrating optics, mechanics and fluidics in a single monolith. These approaches open new opportunities for direct-write methods of microsystems (3D printing). Personal website
Eugen Brühwilerbirth date: 19.11.1958 nationality: Swiss (native from Dussnang, Canton of Thurgau) Education : - July 1988 : doctoral degree from the Swiss Federal Institute of Technology in Lausanne (EPFL), Switzerland with a thesis entitled Fracture mechanics of dam concrete subjected to quasi-static and seismic loading conditions - December 1983 : civil engineering diploma (university degree) from the Swiss Federal Institute of Technology (ETH) in Zurich, Switzerland Professional Experience : - Since 1st April 1995 : Professor of Structural Engineering at EPFL and Head of the Laboratory of Maintenance, Construction and Safety for Civil Structures (MCS) (often considered being the first chair worldwide devoted exclusively to existing civil structures). - 1991-94 Project Manager and structural engineer with the Swiss Federal Railways (SBB), Division of Bridges and Structures, Zurich: Monitoring and maintenance of bridges and structures, Project manager and checking engineer for the construction of new bridges and rehabilitation of existing bridges. - 1989/90 Research associate at the Department of Civil Engineering, University of Colorado, Boulder, USA : Fracture mechanics of concrete and fracture of concrete dams. - 1986-88 Doctoral student at EPFL-LMC (Building Materials, Prof. Wittmann) : Fracture mechanics of concrete, fracture of concrete dams under seismic loading - 1984/85 Research engineer at EPFL-ICOM (Steel Structures, Prof. Badoux and Prof. Hirt) : Fatigue behaviour and fracture mechanics of riveted bridges
Paolo De Los RiosPaolo De Los Rios earned his master in Electronic Engineering at the Turin Institute of Technology (Politecnico di Torino) in May 1993. In November 1993 he moved to Trieste, Italy, to enter the PhD program in Theoretical Condensed Matter Theory at the International School for Advanced Studies (SISSA/ISAS) where he obtained the PhD degree in October 1996 for his work on the statistical physics of disordered systems. After a one year postdoc at the Max-Planck Institute for the Physics of Complex Systems in Dresden, Germany, in November 1997 he moved to the University of Fribourg, Switzerland, to join the group of Prof. Yi-Cheng Zhang. There he has worked on various applications of statistical physics to complex systems. In September 2000 he has been appointed Assistant Professor in Statistical Physics of Living Matter and Complex Systems at the Institute of Theoretical Physics of the University of Lausanne, Switzerland. Since April 2010 he is Associate Professor at the Institute of Theoretical Physics of the Ecole Polytechnique Fédérale de Lausanne (EPFL), Switzerland.
Touradj EbrahimiTouradj EBRAHIMI received his M.Sc. and Ph.D., both in Electrical Engineering, from the Swiss Federal Institute of Technology (EPFL), Lausanne, Switzerland, in 1989 and 1992 respectively. In 1993, he was a research engineer at the Corporate Research Laboratories of Sony Corporation in Tokyo, where he conducted research on advanced video compression techniques for storage applications. In 1994, he served as a research consultant at AT&T Bell Laboratories working on very low bitrate video coding. He is currently Professor at EPFL heading its Multimedia Signal Processing Group. He is also the Convenor of JPEG standardization Committee. He was also adjunct Professor with the Center of Quantifiable Quality of Service at Norwegian University of Science and Technology (NTNU)from 2008 to 2012.
Prof. Ebrahimi has been the recipient of various distinctions and awards, such as the IEEE and Swiss national ASE award, the SNF-PROFILE grant for advanced researchers, Four ISO-Certificates for key contributions to MPEG-4 and JPEG 2000, and the best paper award of IEEE Trans. on Consumer Electronics . He became a Fellow of the international society for optical engineering (SPIE) in 2003. Prof. Ebrahimi has initiated more than two dozen National, European and International cooperation projects with leading companies and research institutes around the world. He is a co-founder of Genista SA, a high-tech start-up company in the field of multimedia quality metrics. In 2002, he founded Emitall SA, start-up active in the area of media security and surveillance. In 2005, he founded EMITALL Surveillance SA, a start-up active in the field of privacy and protection. He is or has been associate Editor with various IEEE, SPIE, and EURASIP journals, such as IEEE Signal Processing Magazine, IEEE Trans. on Image Processing, IEEE Trans. on Multimedia, EURASIP Image Communication Journal, EURASIP Journal of Applied Signal Processing, SPIE Optical Engineering Magazine. Prof. Ebrahimi is a member of Scientific Advisory Board of various start-up and established companies in the general field of Information Technology. He has served as Scientific Expert and Evaluator for Research Funding Agencies such as those of European Commission, The Greek Ministry of Development, The Austrian National Foundation for Scientific Research, The Portuguese Science Foundation, as well as a number of Venture Capital Companies active in the field of Information Technologies and Communication Systems. His research interests include still, moving, and 3D image processing and coding, visual information security (rights protection, watermarking, authentication, data integrity, steganography), new media, and human computer interfaces (smart vision, brain computer interface).
He is the author or the co-author of more than 200 research publications, and holds 14 patents. Prof. Ebrahimi is a member of IEEE, SPIE, ACM and IS&T.
See the URL below for more details:
http://mmspl.epfl.ch Cécile HébertCécile Hébert was born in France in 1970. She obtained her Ingeneer degree (physics) and her PhD degree (design of a new energy filter for transmission electron microscopy, under the direction of Prof. B. Jouffrey) at the Ecole Centrale in Paris.
As a post doc with Prof. P. Schattschneider, she was working on the calculation of the fine structure of ionisation edges in EELS. As a research assistant at the Vienna University of Technology, she was one of the main participant to the CHIRALTEM project dealing with the measurement of magnetic circular dichroism in the electron microscope.
Harm-Anton KlokExpertise
Polymer design at nanoscaleBiologically-inspired polymers
Mission
Research at the Laboratory of Polymer (LP) focuses on the development of novel advanced polymeric materials with potential applications in optics, electronics or medicine. The philosophy is that precise control over nanoscale structure is an important prerequisite to tailor polymer properties. To this end, a “bottom-up” approach is followed, which starts with designing a new material at the molecular level, in order to be able to pr
Jérôme ChenalExpertise
Urban DesignUrban PlanningUrban ManagementPublic SpaceHousingDevelopment StudiesVisual Anthropology
Mission
Director of CEAT Director of Excellence in Africa Center Affiliate professor at UM6P
Teaching & PhD Past EPFL PhD Students Stéphanie Hasler, Rémi Jaligot, Armel Firmin Kemajou Mbianda, Martí Bosch Padrós, Andrea Salmi, Vitor Pessoa Colombo, Akuto Akpedze Konou, Rim Mrani Past EPFL PhD Students as codirector Marc Antoine Messer, Alexandre Rigal Courses Urban planning in the South PE
