Emmanuelle Anne Boehm CourjaultTeaching & PhD Past EPFL PhD Students as codirector Solène Anne-Lise Albinski Courses Building materials + Laboratory work MSE-322 Materials science of common non metallic building materials, with emphasis on cementitious materials (concrete). Chemical composition, fabrication and behaviour in service Materials MSE-171 Introduction course of material science applied to usual building materials, especially concrete and metals. Description of their fabrication, mechanical and
Julie Nathalie S GheysenProfessionals experiences PhD student 2018–2022 Université Catholique de Louvain
Teaching & PhD Courses Materials MSE-171 Introduction course of material science applied to usual building materials, especially concrete and metals. Description of their fabrication, mechanical and thermal properties and use in construction. Mechanical behaviour of materials MSE-234 This course provides an introduction to the mechanical behaviour, the processing, the structure and life-cycle o
Daniel Alexander Florez OrregoExpertise
• Exergy and Energy Integration of Chemical and Industrial Processes• Cogeneration and Polygeneration, Refrigeration and Heat Pumping Systems• Technical, Economic and Environmental Analyses• Refineries, Biorefineries, Fertilizers Complexes, Hydrogen and Synthetic Fuels (SNG, DME, MeOH, FT, H2, Power-to-X)• Second law of Thermodynamics and Irreversible Thermodynamics• Combustion, Heat Transfer, Computational Fluid Dynamics, Reaction design• Modeling and Optimization of Energy Conversion Systems• Ma
François MaréchalPh D. in engineering Chemical process engineer
Researcher and lecturer in the field of computer aided process and energy systems engineering.
Lecturer in the mechanical engineering, electrical engineering and environmental sciences engineering in EPFL.
I'm responsible for the Minor in Energy of EPFL and I'm involved in 3 projects of the Competence Center in Energy and Mobility (2nd generation biofuel, Wood SOFC, and gas turbine development with CO2 mitigation) in which i'm contributing to the energy conversion system design and optimisation.
Short summary of my scientific carrer
After a graduation in chemical engineering from the University of Liège, I have obtained a Ph. D. from the University of Liège in the LASSC laboratory of Prof. Kalitventzeff (former president of the European working party on computer aided process engineering). This laboratory was one of the pioneering laboratory in the field of Computer Aided Process Engineering.
In the group of Professor Kalitventzeff, I have worked on the development and the applications of data reconciliation, process modelling and optimisation techniques in the chemical process industry, my experience ranges from nuclear power stations to chemical plants. In the LASSC, I have been responsible from the developments in the field of rational use of energy in the industry. My first research topic has been the methodological development of process integration techniques, combining the use of pinch based methods and of mathematical programming: e.g. for the design of multiperiod heat exchanger networks or Mixed integer non linear programming techniques for the optimal management of utility systems. Fronted with applications in the industry, my work then mainly concentrated on the optimal integration of utility systems considering not only the energy requirements but the cost of the energy requirements and the energy conversion systems. I developed methods for analysing and integrating the utility system, the steam networks, combustion (including waste fuel), gas turbines or other advanced energy conversion systems (cogeneration, refrigeration and heat). The techniques applied uses operation research tools like mixed integer linear programming and exergy analysis. In order to evaluate the results of the utility integration, a new graphical method for representing the integration of the utility systems has been developed. By the use of MILP techniques, the method developed for the utility integration has been extended to handled site scale problems, to incorporate environmental constraints and reduce the water usage. This method (the Effect Modelling and Optimisation method) has been successfully applied to the chemical plants industry, the pulp and paper industry and the power plant. Instead of focusing on academic problems, I mainly developed my research based on industrial applications that lead to valuable and applicable patented results. Recently the methods developed have been extended to realise the thermoeconomic optimisation of integrated systems like fuel cells. My present R&D work concerns the application of multi-objective optimisation strategies in the design of processes and integrated energy conversion systems.
Since 2001, Im working in the Industrial Energy Systems Laboratory (LENI) of Ecole Polytechnique fédérale de Lausanne (EPFL) where Im leading the R&D activities in the field of Computer Aided Analysis and Design of Industrial Energy Systems with a major focus on sustainable energy conversion system development using thermo-economic optimisation methodologies. A part from the application and the development of process integration techniques, that remains my major field of expertise, the applications concern :
Rational use of water and energy in Industrial processes and industrial production sites : projects with NESTLE, EDF, VEOLIA and Borregaard (pulp and paper).Energy conversion and process design : biofuels from waste biomass (with GASNAT, EGO and PSI), water dessalination and waste water treatment plant (VEOLIA), power plant design (ALSTOM), Energy conversion from geothermal sources (BFE). Integrated energy systems in urban areas : together with SCANE and SIG (GE) and IEA annexe 42 for micro-cogeneration systems.
I as well contributed to the definition of the 2000 Watt society and to studies concerning the emergence of green technologies on the market in the frame of the Alliance for Global Sustainability.
Michaël UnserExpertise
Image Processing, Medical Imaging, Biological Imaging, Wavelets, Splines, Multiresolution
Michael Unser is Full Professor with EPFL’s school of Engineering and the academic director of EPFL's Center for Imaging, Lausanne, Switzerland. His primary areas of investigation are signal processing, biomedical imaging and applied functional analysis. He is internationally recognized for his research contributions to sampling theory, wavelets, the use of splines for image processing, stochastic processes,
Paolo De Los RiosPaolo De Los Rios earned his master in Electronic Engineering at the Turin Institute of Technology (Politecnico di Torino) in May 1993. In November 1993 he moved to Trieste, Italy, to enter the PhD program in Theoretical Condensed Matter Theory at the International School for Advanced Studies (SISSA/ISAS) where he obtained the PhD degree in October 1996 for his work on the statistical physics of disordered systems. After a one year postdoc at the Max-Planck Institute for the Physics of Complex Systems in Dresden, Germany, in November 1997 he moved to the University of Fribourg, Switzerland, to join the group of Prof. Yi-Cheng Zhang. There he has worked on various applications of statistical physics to complex systems. In September 2000 he has been appointed Assistant Professor in Statistical Physics of Living Matter and Complex Systems at the Institute of Theoretical Physics of the University of Lausanne, Switzerland. Since April 2010 he is Associate Professor at the Institute of Theoretical Physics of the Ecole Polytechnique Fédérale de Lausanne (EPFL), Switzerland.
Daniel SageExpertise
PublicationsPublications
Coordinates Biomedical Imaging GroupAddressEPFL STI-IMT-LIB, BM 4.135, Station 17, CH-1015 Lausanne, SwitzerlandTel.+41 21 693 51 89Fax.+41 21 693 68 10Emaildaniel.sage@epfl.chWeb pagehttp://bigwww.epfl.ch/sage/OfficeBM 4.135
Teaching & PhD Past EPFL PhD Students as codirector Daniel Andreas Schmitter, Anaïs Badoual, Laurène Donati Courses Bioimage informatics BIO-410 The course provides a comprehensive overview of methods, algorithms, and computer tools us Yves LeterrierYves Leterrier joined EPFL in 1993 and is a faculty member of the Materials Institute. He is a senior scientist and lecturer in the Laboratory for Processing of Advanced Composites (LPAC, previously Laboratory of Composite and Polymer Technology, LTC). Activities
2000-2005: Foundation and Chair of the Korea-Switzerland joint symposia on materials and micro-technologies2004-2008: Board member of FLEXIDIS (the European flexible display consortium) 2004-2009: Group leader on lightweight materials for Solar ImpulseSince 2008: Board member of the French Adhesion SocietySince 2000: President of the EPFL Materials Science Library commissionSince 2012: Editorial board member, Applied Surface ScienceSince 2014: Associate Editor, Frontiers in MaterialsSince 2021: Coordinator of the EPFL Minor on 'Engineering for Sustainability'
Background
1987: MS in materials science and solid state physics (INPL, France) 1991: PhD in materials science (Ecole des Mines, INPL, France) 1992: Research Associate, National Institute of Standards and Technology (NIST, USA)
Reinart Andreas J. CoosemansTeaching & PhD Courses General physics : mechanics PHYS-101(a) Give the student the basic notions that will allow him or her to have a better understanding of physical phenomena, such as the mechanic of point masses. Acquire the capacity to analyse quantitatively the consequences of these effects with appropriate theoretical tools.
Mohammad Khaja NazeeruddinDr. Md. K. Nazeeruddin received M.Sc. and Ph. D. in inorganic chemistry from Osmania University, Hyderabad, India. He joined as a Lecturer in Deccan College of Engineering and Technology, Osmania University in 1986, and subsequently, moved to Central Salt and Marine Chemicals Research Institute, Bhavnagar, as a Research Associate. He was awarded the Government of Indias fellowship in 1987 for study abroad. In 2014, EPFL awarded him the title of Professor. His current research at EPFL focuses on Dye Sensitized Solar Cells, Perovskite Solar Cells, CO2 reduction, Hydrogen production, and Light-emitting diodes. He has published more than 509 peer-reviewed papers, ten book chapters, and he is inventor/co-inventor of over 50 patents. The high impact of his work has been recognized by invitations to speak at over 130 international conferences, and has been nominated to the OLLA International Scientific Advisory Board. He appeared in the ISI listing of most cited chemists, and has more than 49'000 citations with an h-index of 105. He is teaching "Functional Materials" course at EPFL, and Korea University; directing, and managing several industrial, national, and European Union projects. He was awarded EPFL Excellence prize in 1998 and 2006, Brazilian FAPESP Fellowship in 1999, Japanese Government Science & Technology Agency Fellowship, in 1998, Government of India National Fellowship in 1987-1988. Recently he has been appointed as World Class University (WCU) professor by the Korea University, Jochiwon, Korea (http://dses.korea.ac.kr/eng/sub01_06_2.htm), Adjunct Professor by the King Abdulaziz University, Jeddah, Saudi Arabia and Eminent Professor in Brunei. Kamil SedlákTeaching & PhD PhD Students Daniel Louis Arthur Biek Courses Fusion and industrial plasma technologies PHYS-632 The course provides an overview of the technologies that are essential for fusion developments and for industrial plasmaapplications, highlighting the synergies between the two fields. The aim is to provide a combined theoretical andexperimental background to the various topics.
Hubert GiraultEducation: 1979 - Engineering diploma from Grenoble Institute of Technology. FRANCE. 1982 - PhD- Department of Chemistry, University of Southampton. Thesis entitled : Interfacial studies using drop image processing techniques. Positions : 1982 - 1984 SERC Research Fellow. University of Southampton. 1984 - 1985 CNRS Research Fellow. University of Southampton. 1985 - 1992 Lecturer in Physical Chemistry, University of Edinburgh. 1992 - Professor of Physical Chemistry, Ecole Polytechnique Fédérale de Lausanne. 2011 - 2014 Dean of Bachelor and Master studies Hubert Girault is the author of 2 textbooks, the co-author of about 600 scientific publications with more than 20'000 citations and the co-inventor of more than 15 patents. During his academic career, he has supervised 70 PhD students. 30 alumni of his laboratory are now Professors. Honours: Faraday medal 2006, Royal Society of Chemistry, Fellow of the International Society of Electrochemistry 2007, Reilley Award 2015. Fellow of the Electrochemical Society (USA), Shikata International medal, Polarography Society of Japan. Associate editor of Chemical Science
Elena RaveraTeaching & PhD Courses Terra Epidermis PENS-211 This transversal project aims to test around a case study chosen, the specifics of " reverse soil ." On a chose site, students will be invited to propose a single technical and architectural gesture, and synthesize their concept graphically.
Andreas OsterwalderEDUCATION:
2002: Dr.sc.nat. (ETH Zurich)
1998: Dipl.Chem. (ETH Zurich)
ACADEMIC POSITIONS:
since 2015: Senior Scientist at EPFL
2009-2015: SNSF-funded Professor at EPFL
2005-2009: Group leader, Fritz-Haber-Institute of the Max-Planck-Society in Berlin (Department of Molecular Physics under Prof. G. Meijer)
2002-2005: Postdoctoral Fellow at UC Berkeley (Group of Prof. D.M.Neumark)
1998-2002: PhD Student at ETHZ (Group of Prof. F.Merkt)
Jean-Louis ScartezziniDirector of EPFL Solar Energy and Building Physics Laboratory (1994-present); Founder & Director of ENAC Institute of Infrastructures, Resources and Environment (2002-2009); Founder & Director of EPFL Doctoral Program in Environment (2002-2009); Co-Director of EPFL Institute of Building Technology (1994-1997); Associate Professor of Building Physics at EPFL (1994-1997); Associate Professor of Building Physics at University of Geneva (1990-1997); Group Leader & Research Fellow at the EPFL Solar Energy Research Group (1981-1989); Research Fellow at the Applied Geophysics Institute of University of Lausanne (1980-1981).
Umar SheikhTeaching & PhD PhD Students Marta Pedrini Courses Atomic and radiative processes in plasmas PHYS-762 The course covers atomic structure, collisional-radiative (CR) processes, and spectroscopic techniques. Students learn to critically apply CR models, evaluate spectroscopic tools, and interpret experimental data obtained in different plasmas.
