Summer Saud IslamSummer Islam, ARB AADipl (hons) is a doctoral fellow at the RIOT lab, EPFL ENAC-IA, where her research project ‘Ground Work’ explores the potential for a decarbonised built environment which prioritises ecosystems over industry. Her work investigates the political ecology of construction materials, with a particular focus on the environmental implications of scaling the use of regenerative materials in housing retrofit. She is also an architect and director of Material Cultures, an interdisciplinary not-for
Emmanuelle Anne Boehm CourjaultTeaching & PhD Past EPFL PhD Students as codirector Solène Anne-Lise Albinski Courses Building materials + Laboratory work MSE-322 Materials science of common non metallic building materials, with emphasis on cementitious materials (concrete). Chemical composition, fabrication and behaviour in service Materials MSE-171 Introduction course of material science applied to usual building materials, especially concrete and metals. Description of their fabrication, mechanical and
Eugen Brühwilerbirth date: 19.11.1958 nationality: Swiss (native from Dussnang, Canton of Thurgau) Education : - July 1988 : doctoral degree from the Swiss Federal Institute of Technology in Lausanne (EPFL), Switzerland with a thesis entitled Fracture mechanics of dam concrete subjected to quasi-static and seismic loading conditions - December 1983 : civil engineering diploma (university degree) from the Swiss Federal Institute of Technology (ETH) in Zurich, Switzerland Professional Experience : - Since 1st April 1995 : Professor of Structural Engineering at EPFL and Head of the Laboratory of Maintenance, Construction and Safety for Civil Structures (MCS) (often considered being the first chair worldwide devoted exclusively to existing civil structures). - 1991-94 Project Manager and structural engineer with the Swiss Federal Railways (SBB), Division of Bridges and Structures, Zurich: Monitoring and maintenance of bridges and structures, Project manager and checking engineer for the construction of new bridges and rehabilitation of existing bridges. - 1989/90 Research associate at the Department of Civil Engineering, University of Colorado, Boulder, USA : Fracture mechanics of concrete and fracture of concrete dams. - 1986-88 Doctoral student at EPFL-LMC (Building Materials, Prof. Wittmann) : Fracture mechanics of concrete, fracture of concrete dams under seismic loading - 1984/85 Research engineer at EPFL-ICOM (Steel Structures, Prof. Badoux and Prof. Hirt) : Fatigue behaviour and fracture mechanics of riveted bridges
Julie Nathalie S GheysenProfessionals experiences PhD student 2018–2022 Université Catholique de Louvain
Teaching & PhD Courses Materials MSE-171 Introduction course of material science applied to usual building materials, especially concrete and metals. Description of their fabrication, mechanical and thermal properties and use in construction. Mechanical behaviour of materials MSE-234 This course provides an introduction to the mechanical behaviour, the processing, the structure and life-cycle o
Michael StuerMission
Study effects of dopants and structural defects on the microstructure development and the optical properties of transparent ceramics.
Teaching & PhD PhD Students Katerina Urbancová, Annalena Erlacher Courses Advanced ceramic technologies MSE-495 Advanced ceramic processing concepts and technologies will be presented. Students will learn concepts on advanced technologically-relevant ceramic materials for a wide range of applications from MedTech, energy conversion & storage, with in
Frédéric PichelinTeaching & PhD Courses Wood structures, properties and uses MSE-466 The presentation of tree growth and formation of wood anatomical structures, linked to the description of specific physical and mechanical properties, makes it possible to understand the different forms of utilisation of this material, including aspects of sustainable development.
Sophie LufkinFORMATION
2010 - Thèse de doctorat au sein de l'EDAR (Ecole doctorale Architecture, Ville, Histoire) sur la densification des friches ferroviaires, co-dirigée par les Prof. Inès Lamunière et Vincent Kaufmann
2005 - "Master of Art" en architecture, sous la direction des Prof. Patrick BERGER et Inès LAMUNIERE
2003 - Année d'échange à l'ETHZ
1999 - Entrée à l'EPFL, section architecture
1998 - Maturité type B, Collège Claparède, Genève
EXPERIENCE PROFESSIONNELLE
2010 - Architecte, Cheffe de projet chez LAR - Fernando Romero, México
2006 - Assistante de recherche à lEPFL au Laboratoire darchitecture et mobilité urbaine (LAMU), projet de recherche PNR54 "Densification des friches ferroviaires"
2005 - Architecte chez Devanthéry & Lamunière, Genève
2004 - Stage darchitecture, Eric Maria, Genève
2003 - Stage darchitecture, Sumi & Burkhalter, Zurich
2001 - Stage darchitecture, Devanthéry & Lamunière, Genève
RECOMPENSES ET BOURSES
2001 - Prix SIA Vaudoise pour le projet "Fondation Ella Maillart à Chandolin"
2005 - Prix de l'Association des diplômes A3-EPFL
2008 - Bourse Erna Hamburger
LANGUES
Français (maternelle), allemand et anglais (courantes), portugais (notions)
Pedro Correa FernandezPedro Correa Fernández is a Doctoral Candidate in Architecture at Columbia GSAPP. Before joining GSAPP, he was an adjunct professor at the Architecture School of Universidad Católica de Chile where he taught seminars and lectures on architecture history and related epistemological, aesthetic, and political issues. His current work examines the mediations between technical knowledge, artisanal crafts, and global industrial capitalism in early nineteenth-century Latin America.Pedro holds an architecture degre
François MaréchalPh D. in engineering Chemical process engineer
Researcher and lecturer in the field of computer aided process and energy systems engineering.
Lecturer in the mechanical engineering, electrical engineering and environmental sciences engineering in EPFL.
I'm responsible for the Minor in Energy of EPFL and I'm involved in 3 projects of the Competence Center in Energy and Mobility (2nd generation biofuel, Wood SOFC, and gas turbine development with CO2 mitigation) in which i'm contributing to the energy conversion system design and optimisation.
Short summary of my scientific carrer
After a graduation in chemical engineering from the University of Liège, I have obtained a Ph. D. from the University of Liège in the LASSC laboratory of Prof. Kalitventzeff (former president of the European working party on computer aided process engineering). This laboratory was one of the pioneering laboratory in the field of Computer Aided Process Engineering.
In the group of Professor Kalitventzeff, I have worked on the development and the applications of data reconciliation, process modelling and optimisation techniques in the chemical process industry, my experience ranges from nuclear power stations to chemical plants. In the LASSC, I have been responsible from the developments in the field of rational use of energy in the industry. My first research topic has been the methodological development of process integration techniques, combining the use of pinch based methods and of mathematical programming: e.g. for the design of multiperiod heat exchanger networks or Mixed integer non linear programming techniques for the optimal management of utility systems. Fronted with applications in the industry, my work then mainly concentrated on the optimal integration of utility systems considering not only the energy requirements but the cost of the energy requirements and the energy conversion systems. I developed methods for analysing and integrating the utility system, the steam networks, combustion (including waste fuel), gas turbines or other advanced energy conversion systems (cogeneration, refrigeration and heat). The techniques applied uses operation research tools like mixed integer linear programming and exergy analysis. In order to evaluate the results of the utility integration, a new graphical method for representing the integration of the utility systems has been developed. By the use of MILP techniques, the method developed for the utility integration has been extended to handled site scale problems, to incorporate environmental constraints and reduce the water usage. This method (the Effect Modelling and Optimisation method) has been successfully applied to the chemical plants industry, the pulp and paper industry and the power plant. Instead of focusing on academic problems, I mainly developed my research based on industrial applications that lead to valuable and applicable patented results. Recently the methods developed have been extended to realise the thermoeconomic optimisation of integrated systems like fuel cells. My present R&D work concerns the application of multi-objective optimisation strategies in the design of processes and integrated energy conversion systems.
Since 2001, Im working in the Industrial Energy Systems Laboratory (LENI) of Ecole Polytechnique fédérale de Lausanne (EPFL) where Im leading the R&D activities in the field of Computer Aided Analysis and Design of Industrial Energy Systems with a major focus on sustainable energy conversion system development using thermo-economic optimisation methodologies. A part from the application and the development of process integration techniques, that remains my major field of expertise, the applications concern :
Rational use of water and energy in Industrial processes and industrial production sites : projects with NESTLE, EDF, VEOLIA and Borregaard (pulp and paper).Energy conversion and process design : biofuels from waste biomass (with GASNAT, EGO and PSI), water dessalination and waste water treatment plant (VEOLIA), power plant design (ALSTOM), Energy conversion from geothermal sources (BFE). Integrated energy systems in urban areas : together with SCANE and SIG (GE) and IEA annexe 42 for micro-cogeneration systems.
I as well contributed to the definition of the 2000 Watt society and to studies concerning the emergence of green technologies on the market in the frame of the Alliance for Global Sustainability.
Jürgen BruggerI am a Professor of Microengineering and co-affiliated to Materials Science. Before joining EPFL I was at the MESA Research Institute of Nanotechnology at the University of Twente in the Netherlands, at the IBM Zurich Research Laboratory, and at the Hitachi Central Research Laboratory, in Tokyo, Japan. I received a Master in Physical-Electronics and a PhD degree from Neuchâtel University, Switzerland. Research in my laboratory focuses on various aspects of MEMS and Nanotechnology. My group contributes to the field at the fundamental level as well as in technological development, as demonstrated by the start-ups that spun off from the lab. In our research, key competences are in micro/nanofabrication, additive micro-manufacturing, new materials for MEMS, increasingly for wearable and biomedical applications. Together with my students and colleagues we published over 200 peer-refereed papers and I had the pleasure to supervise over 25 PhD students. Former students and postdocs have been successful in receiving awards and starting their own scientific careers. I am honoured for the appointment in 2016 as Fellow of the IEEE “For contributions to micro and nano manufacturing technology”. In 2017 my lab was awarded an ERC AdvG in the field of advanced micro-manufacturing.
Show more