Mediaspace scheduled maintenance: Aug 25, 2026 07:00 - 12:00 AM. During this time, videos will be temporarily unavailable. Check status updates.

Concept

Building material

Related publications (25)

Localized Ionic Reinforcement of Double Network Granular Hydrogels

Esther Amstad, Alexandra Thoma

Nature produces soft materials with fascinating combinations of mechanical properties. For example, the mussel byssus embodies a combination of stiffness and toughness, a feature that is unmatched by synthetic hydrogels. Key to enabling these excellent mec ...

Wiley-V C H Verlag Gmbh2024

ForMAX - a beamline for multiscale and multimodal structural characterization of hierarchical materials

Yiming Li, Yi Zhang, Marianne Liebi, Zhongwen Yao, Vitor Silva

The ForMAX beamline at the MAX IV Laboratory provides multiscale and multimodal structural characterization of hierarchical materials in the nanometre to millimetre range by combining small- and wide-angle X-ray scattering with full-field microtomography. ...

Int Union Crystallography2024

Modeling friction and wear using an adaptive discrete-continuum coupling

Manon Eugénie Voisin--Leprince

When two objects slide against each other, wear and friction occur at their interface. The accumulation of wear forms what is commonly referred to as a ``third-body''. Understanding third-body evolution has significant applications in industry, where contr ...

EPFL2024

Quantification of Native Lignin Structural Features with Gel-Phase 2D-HSQC0 Reveals Lignin Structural Changes During Extraction

Jeremy Luterbacher, Stefania Bertella, Claire Laura Marion Charline Bourmaud

Our ability to study and valorize the lignin fraction of biomass is hampered by the fundamental and still unmet challenge of precisely quantifying native lignin's structural features. Here, we developed a rapid elevated-temperature H-1-C-13 Heteronuclear S ...

Wiley-VCH Verlag GmbH2024

Seismic Testing of Adjacent Interacting Masonry Structures – Analysis of a Blind Prediction

Katrin Beyer, Igor Tomic

Masonry aggregates, which emerged as layouts of cities and villages became denser, make up historical centres all over the world. In these aggregates, neighbouring structures may share structural walls that are joined at the interfaces by mortar or interlo ...

Springer2024

Spatial Modeling for Building Design Evaluation: from Visual Landscape Quality Assessment to Devaluation Risk Estimation

Adam Robert Swietek

Zoning reform is a crucial tool for cities to adapt to contemporary challenges. However, its implementation remains challenging. Property owners, with a vested interest in the value of their neighborhoods, are sensitive to local developments and the potent ...

EPFL2024

Additively manufactured steel reinforcement for small scale reinforced concrete modeling: Tensile and bond behavior

Christian Leinenbach

Small scale (1:30-1:40) Reinforced Concrete is useful for centrifuge testing. However, manufacturing the reinforcing cages by hand at this scale is practically difficult. This paper suggests that small scale reinforcement can be manufactured using a metal ...

Elsevier Sci Ltd2024

RE:SLAB — a load bearing system for open-ended component reuse in building structures

Corentin Jean Dominique Fivet, Jan Friedrich Georg Brütting, Dario Redaelli, Alex-Manuel Muresan, Edisson Xavier Estrella Arcos

The construction industry plays a major role in the high levels of greenhouse gas emissions, resource consumption, and waste generation observed nowadays. Key to the circular economy, structural component reuse arises as a promising solution to divert cons ...

2024

Reusability Assessment of Obsolete Reinforced Concrete Structural Components

Corentin Jean Dominique Fivet, Maléna Bastien Masse, Célia Marine Küpfer, Julie Rachel Devènes

The production of concrete, the most widely used construction material, detrimentally affects the environment. Obsolete reinforced concrete (RC) load-bearing structures, even when still in good condition, are today prematurely crushed and landfilled or rec ...

Springer2023

3-D contact and pore network analysis of MICP cemented sands

Dimitrios Terzis

The study describes a comprehensive methodology to evaluate X-Ray micro-computed tomography data from sand samples and to characterize their 3D microstructural properties. Fine and medium-grained sands are analyzed in their natural and bio-cemented states. ...

SPRINGER2023

Building structures made of reused cut reinforced concrete slabs and walls: A case study

Corentin Jean Dominique Fivet, Maléna Bastien Masse, Nicole Widmer

Reuse of reinforced concrete (RC) components reduces construction’s environmental impacts and waste. Rather than crushing the concrete of an obsolete structure, its components are saw cut and later reassembled in a new structure. The theoretical feasibilit ...

CRC Press2023

Expert perceptions of game-changing innovations towards net zero

Marc Vielle, Sigit Pria Perdana

Current technological improvements are yet to put the world on track to net-zero, which will require the uptake of transformative low-carbon innovations to supplement mitigation efforts. However, the role of such innovations is not yet fully understood; so ...

2023

Organic electrochemical transistors printed from degradable materials as disposable biochemical sensors

Danick Briand, Nicolas Francis Fumeaux, Silvia Demuru, Claudio Pinto Almeida

Transient electronics hold promise in reducing electronic waste, especially in applications that require only a limited lifetime. While various degradable electronic and physical sensing devices have been proposed, there is growing interest in the developm ...

Nature Research2023

Reuse of Load-Bearing Timber Elements - Case Study of a Lookout Tower in Lausanne, Switzerland

Corentin Jean Dominique Fivet, Julius Natterer, Jonas Warmuth, Edisson Xavier Estrella Arcos

The construction industry is jeopardizing Earth’s environment; current mitigation efforts do not suffice; and additional sustainable strategies are required. One such strategy consists of reusing structural building elements over multiple service lives. In ...

Curran Associates, Inc.2023

Atomic-scale Characterization of Strain and Gate effects on Two-dimensional Materials by Scanning Tunneling Microscopy

Jz -Yuan Juo

Strain is an inevitable phenomenon in two-dimensional (2D) material, regardless of whether the film is suspended or supported. Moreover, strain is known to alter the physical and chemical properties, such as the band gap, charge carrier effective masses, d ...

EPFL2023

Spatial Distributions of Diarrheal Cases in Relation to Housing Conditions in Informal Settlements: A Cross-Sectional Study in Abidjan, Côte d’Ivoire

Jérôme Chenal, Vitor Pessoa Colombo, Jürg Utzinger

In addition to individual practices and access to water, sanitation, and hygiene (WASH) facilities, housing conditions may also be associated with the risk of diarrhea. Our study embraced a broad approach to health determinants by looking at housing depriv ...

2023

Design of New Low-Carbon Floor Systems by Reusing Cut Cast-in-Place Concrete Pieces

Corentin Jean Dominique Fivet, Numa Joy Bertola, Célia Marine Küpfer

As floors typically account for the largest share of a building embodied carbon footprint, new strategies to build low-carbon floors must be developed and implemented. Among these strategies, the reuse of existing components is a promising circular approac ...

Novus Press2023

Sensing the structural behavior: A perspective on the usefulness of monitoring information for bridge examination

Eugen Brühwiler, Numa Joy Bertola, Yves Sylvain Gilles Reuland

Managing existing civil infrastructure is challenging due to evolving functional requirements, material aging, and climate change. With increasingly limited economic, environmental, and material resources, more sustainable solutions for practical asset man ...

2023

Modelling of metal alloys in realistic conditions with machine learning

Nataliya Lopanitsyna

Computer simulations based on statistical methods have emerged as a powerful tool for studying structure-property relationships at the atomistic level. However, to provide reliable insights into materials in realistic conditions, it is essential to accurat ...

EPFL2023

Seismic Testing of Adjacent Interacting Masonry Structures

Katrin Beyer, Igor Tomic

Masonry buildings form building aggregates around the world in historical centers, which developed as the layout of the city or village densified. In these aggregates, adjacent buildings can share structural walls, connected at the interfaces by interlocki ...

2023