Fabrizio CarboneBirth 20/04/1976
Master degree: University of Pavia "optoelectronic engineering". September 2001.
Reasearch scientist at Pirelli Labs, Milan Italy between September 2000 and August 2002.
PhD in condensed matter physics from the University of Geneva, prof. van der Marel gorup. January 2007
Post doc in physical chemistry at Caltech in prof. Zewail`s group. March 2007-April 2009
Yves BellouardDr. Yves Bellouard is Associate Professor in Microengineering at Ecole Polytechnique Fédérale de Lausanne (EPFL) in Switzerland, where he heads the Galatea lab and the Richemont Chair in micromanufacturing. He received a BS in Theoretical Physics and a MS in Applied Physics from Université Pierre et Marie Curie in Paris, France in 1994-1995 and a PhD in Microengineering from Ecole Polytechnique Fédérale de Lausanne (EPFL) in Lausanne, Switzerland in 2000. For his PhD work, he received the Omega Scientific prize (2001) for outstanding contribution in the field of microengineering for his work on Shape Memory Alloys. Before joining EPFL in 2015, he was Associate Professor at Eindhoven University of Technologies (TU/e) in the Netherlands and prior to that, Research Scientist at Rensselaer Polytechnic Institute (RPI) in Troy, New York for about four years where he started working on femtosecond laser processing of glass materials. From 2010 until 2013, Yves Bellouard initiated and coordinated the Femtoprint project, a European research initiative aiming at investigating a table-top printer for microsystems ('3D printing of microsystems'). In 2013, he received a prestigious ERC Starting Grant (Consolidator-2012) from the European Research Council and a JSPS Fellowship from the Japan Society for the Promotion of Science. His current research interests are on new paradigms for system integration at the microscale and in particular laser-based methods to tailor material properties for achieving higher level of integration in microsystems, like for instance integrating optics, mechanics and fluidics in a single monolith. These approaches open new opportunities for direct-write methods of microsystems (3D printing). Personal website
Marcel DrabbelsDr. Marcel Drabbels studied experimental physics at the University of Nijmegen (the Netherlands) and in 1993 obtained his Ph.D. at that same university. He then moved to the University of California at Santa Barbara where he studied the dynamics of highly vibrationally excited molecules and developed a new detection technique to investigate the photodissociation of molecules. When he returned to the Netherlands in 1996 he joined the FOM Institute for Atomic and Molecular Physics in Amsterdam where he worked on the development of new types of infrared imaging and streak cameras. In 1997 Dr. Drabbels was awarded a fellowship of the Royal Dutch Academy of Sciences and he moved to the Free University of Amsterdam where he studied the collision dynamics of molecules and initiated photodissociation experiments using ultrafast lasers. In October 1998 he was appointed as senior scientist at the EPFL where he studies the spectroscopy and dynamics of nanoscale systems. In March 2021 he was promoted to titular professor.
Pierre-Etienne BourbanBackground 1990 Ingénieur en science des matériaux 1993 PhD in materials science Activities 1993-1994 Research at the Center for Composite Materials, University of Delaware, USA (ccm.udel.edu), SNSF grant Since 1994 Research and teaching at EPFL, Composites, (LTC, LPAC) 1995-1999 Coordination Swiss Priority Program on Materials research: 2.2: Composites Since 1998 Biocomposites 2004-2009 Direction of the EPFL Transdisciplinary programme in Sport and Rehabilitation 2005-2008 Member of the EPFL Vice-Presidency for Innovation and Valorisation and direction a.i.EPFL-LTC Since 2016 Direction Discovery Learning Labs Materials/Bioengineering and Engineering
Anna Fontcuberta i Morral2014 Associate Professor at the Institut des Matériaux, EPFL
2008 Assistant Professor Tenure Track at the Institut des Matériaux, EPFL
2009 Habilitation in Physics, Technische Universität München
2005-2010 Marie Curie Excellence Grant Team Leader at Walter Schottky Institut, Technische Universität München, on leave from Centre National de la Recherche Scientifique (CNRS, France)
2004-2005 Visiting Scientist at the California Institute of Technology, on leave from CNRS; Senior Scientist and co-founder of Aonex Technologies (a startup company for large area layer transfer of InP and Ge on foreign substrates for the main application of multi-junction solar cells)
2003 Permanent Research Fellow at CNRS, Ecole Polytechnique, France
2001-2002 Postdoctoral Scholar at the California Institute of Technology
Study of wafer bonding and hydrogen-induced exfoliation processes for integration of mismatched materials in views of photovoltaic applications
Sponsor: Professor Harry A. Atwater
1998-2001 PhD in Materials Science, Ecole Polytechnique
Study of polymorphous silicon: growth mechanisms, optical and structural properties. Application to Solar Cells and Thin Film Transistors
Advisor: Pere Roca i Cabarrocas
1997-1998 Diplôme dEtudes Approfondis (D.E.A.) in Materials Science at Université Paris XI, France .
1993-1997 BA in Physics at Universitat de Barcelona
Jürgen BruggerI am a Professor of Microengineering and co-affiliated to Materials Science. Before joining EPFL I was at the MESA Research Institute of Nanotechnology at the University of Twente in the Netherlands, at the IBM Zurich Research Laboratory, and at the Hitachi Central Research Laboratory, in Tokyo, Japan. I received a Master in Physical-Electronics and a PhD degree from Neuchâtel University, Switzerland. Research in my laboratory focuses on various aspects of MEMS and Nanotechnology. My group contributes to the field at the fundamental level as well as in technological development, as demonstrated by the start-ups that spun off from the lab. In our research, key competences are in micro/nanofabrication, additive micro-manufacturing, new materials for MEMS, increasingly for wearable and biomedical applications. Together with my students and colleagues we published over 200 peer-refereed papers and I had the pleasure to supervise over 25 PhD students. Former students and postdocs have been successful in receiving awards and starting their own scientific careers. I am honoured for the appointment in 2016 as Fellow of the IEEE “For contributions to micro and nano manufacturing technology”. In 2017 my lab was awarded an ERC AdvG in the field of advanced micro-manufacturing.
Philippe FlückigerSince 1999 Philippe Flückiger is the Director of Operations at the EPFL Center of MicroNanoTechnology, a world-class state-of-the-art cleanroom dedicated to research and development in the field of Micro and NanoFabrication. He received his diploma in physics from the University of Neuchâtel, Switzerland in 1987 and his PhD from the same University in 1993. His thesis work was dedicated to the deposition, patterning and characterization of high temperature superconductor epitaxial thin films. From 1993 to 1994 he was a post doc at Stanford University to develop submicron lithography with the atomic force microscope in the group of Calvin Quate, inventor of the AFM. From 1995 to 1997 he was successively process engineer, project manager and process engineering manager at Micronas SA in Bevaix, Switzerland, a microelectronics company producing baseband processors and voltage regulators for wireless applications, mostly ASICs for Nokia Mobile Phones. In 1997 he spent 4 months in the production line of EM Microelectronic Marin SA, Switzerland, a semiconductor manufacturer specialized in the design and production of ultra low power, low voltage integrated circuits for battery-operated and field-powered applications. He joined then the Swiss Federal Institute of Technology in Lausanne (EPFL) to start the new activity in diffusion, oxidation and CVD at the Center of MicroNanoTechnology. He was appointed Director of Operations of the Center in 1999.
Alok RudraTeaching & PhD Courses Introduction to Metalorganic Vapour Phase Epitaxy of III-V semiconductors PHYS-747 This course offers an insight into the science of epitaxial growth, a chapter of surface science requiring basic understanding of thermodynamics, crystallography, electronic and optical properties of semiconductors.
Benjamin DwirAcademic title: Dr.
Birth date: 24.10.1959
Nationality: Swiss
At EPFL since: 1988
Ivo UtkeTeaching & PhD PhD Students Camilla Minzoni Past EPFL PhD Students as codirector Vinzenz Friedli, Laurent Bernau, Luisa Berger Courses Nanofabrication with focused electron and ion beams MSE-619 Nanofabrication with focused charged particle beams (SEM, FIB) and their applications such as lithography, gas assisted deposition / etching, and milling are discussed and the limitations of these processes are developed based on the acquired understanding of the interactions.
