Athanasios NenesTeaching & PhD PhD Students Berkay Dönmez, Ernest Abboud Past EPFL PhD Students Paraskevi Georgakaki, Lucile Ricard Courses Atmospheric processes: from cloud to global scales ENV-407 The main objective is to present important atmospheric processes from the local to global scales. The course will start with cloud processes, continue to synoptic phenomena like extratropical cyclones and fronts, to finally cover numerical modeling at the regional and global scales. Introduction to environme
Jürgen BruggerI am a Professor of Microengineering and co-affiliated to Materials Science. Before joining EPFL I was at the MESA Research Institute of Nanotechnology at the University of Twente in the Netherlands, at the IBM Zurich Research Laboratory, and at the Hitachi Central Research Laboratory, in Tokyo, Japan. I received a Master in Physical-Electronics and a PhD degree from Neuchâtel University, Switzerland. Research in my laboratory focuses on various aspects of MEMS and Nanotechnology. My group contributes to the field at the fundamental level as well as in technological development, as demonstrated by the start-ups that spun off from the lab. In our research, key competences are in micro/nanofabrication, additive micro-manufacturing, new materials for MEMS, increasingly for wearable and biomedical applications. Together with my students and colleagues we published over 200 peer-refereed papers and I had the pleasure to supervise over 25 PhD students. Former students and postdocs have been successful in receiving awards and starting their own scientific careers. I am honoured for the appointment in 2016 as Fellow of the IEEE “For contributions to micro and nano manufacturing technology”. In 2017 my lab was awarded an ERC AdvG in the field of advanced micro-manufacturing.
John Martin KolinskiDr. Kolinski studied Applied Mathematics (Sc.M.) and Applied Physics (Ph.D.) at Harvard University, completing a PhD under the supervision of L. Mahadevan and Shmuel Rubinstein on the role of air in droplet impact. John did his post-doc at the Hebrew University of Jerusalem in Israel supported by the Fulbright post-doctoral fellowship. At HUJI, he worked on interfacial instabilities in soft matter in the labs of Eran Sharon and Jay Fineberg. John continues his research into interfacial mechanics at EPFL in EMSI, his newly founded laboratory for the study of Engineering Mechanics of Soft Interfaces.
Demetri PsaltisResearch group
Teaching & PhD PhD Students Victoria Fay, Colin Nikhil Christian Past EPFL PhD Students Wuzhou Song, Alexandre Goy, Julien Cuennet, Ioannis Papadopoulos, Xin Yang, Grégoire Pierre Jean Laporte, Thomas Jean Victor Marie Lanvin, Seyyed Mohammad Hosseini Hashemi, Nicolino Stasio, Morteza Hasani Shoreh, Marilisa Romito, Pooria Hadikhani, Eirini Kakkava, Joowon Lim, Giulia Panusa, Ahmed Bassam Sayed Ayoub Mohamed Ayoub, Amirhossein Saba, Niyazi Ulas Dinç Past EPFL PhD
Hubert GiraultEducation: 1979 - Engineering diploma from Grenoble Institute of Technology. FRANCE. 1982 - PhD- Department of Chemistry, University of Southampton. Thesis entitled : Interfacial studies using drop image processing techniques. Positions : 1982 - 1984 SERC Research Fellow. University of Southampton. 1984 - 1985 CNRS Research Fellow. University of Southampton. 1985 - 1992 Lecturer in Physical Chemistry, University of Edinburgh. 1992 - Professor of Physical Chemistry, Ecole Polytechnique Fédérale de Lausanne. 2011 - 2014 Dean of Bachelor and Master studies Hubert Girault is the author of 2 textbooks, the co-author of about 600 scientific publications with more than 20'000 citations and the co-inventor of more than 15 patents. During his academic career, he has supervised 70 PhD students. 30 alumni of his laboratory are now Professors. Honours: Faraday medal 2006, Royal Society of Chemistry, Fellow of the International Society of Electrochemistry 2007, Reilley Award 2015. Fellow of the Electrochemical Society (USA), Shikata International medal, Polarography Society of Japan. Associate editor of Chemical Science
Raffaella BuonsantiTeaching & PhD PhD Students Riya Gupta, Jennifer Calderon Mora, Coline Boulanger, Moritz Tritschler, Marco Fabbiano, Seyedmohamadjavad Chabok, Hugh Andrew Warkentin Past EPFL PhD Students Chethana Janardhana Gadiyar, Seryio Saris, Valeria Mantella, Seyedehbehnaz Varandili, Pranit Srinivas Iyengar, Yannick Thomas Guntern, Jan Vávra, Laia Castilla Amorós, Valery Okatenko, Ona Segura Lecina, Ludovic Emile Frédy Zaza, Petru Pasquale Albertini Courses Introduction to chemical engineering Laboratory Works
Arnaud BertschTeaching & PhD PhD Students Tao Zhang, Pol Torres Vila, Nicolas Bruno Minazzo Past EPFL PhD Students as codirector Joan Teixidor, Clémentine Sophie Sarah Lipp, Nicolas Grégoire Maïno, Jiande Zhou, Jongeon Park Courses Advanced microfabrication practicals MICRO-373 This TP allows for in-depth training on advanced micro and nanofabrication methods in a clean-room environment for selected applications, gain deeper knowledge in MEMS/NEMS processes, work in a small group together with PhD stude
Daniel Ortiz TrujilloTeaching & PhD Courses Mass spectrometry, principles and applications CH-728 The goal is to provide students with a complete overview of the principles and key applications of modern mass spectrometry and meet the current practical demand of EPFL researchers to improve structural analsis of molecules. Numerous instrumental aspects of mass spectrometry are described.
Laure MeninExpertise
Mass spectrometryLC-MS / GC-MSBiochemistryProteomicsToxinologyDrug discovery
Teaching & PhD Courses Mass spectrometry, principles and applications CH-728 The goal is to provide students with a complete overview of the principles and key applications of modern mass spectrometry and meet the current practical demand of EPFL researchers to improve structural analsis of molecules. Numerous instrumental aspects of mass spectrometry are described.
Esther AmstadEsther Amstad studied material science at ETH in Zurich. She also carried out her PhD thesis at the same University under the supervision of Prof. Marcus Textor; for her thesis, she worked on the surface modification and steric stabilization of oxide nanoparticles. As a postdoctoral fellow, she joined the experimental condensed soft matter group of David A. Weitz at Harvard University where she used droplet based microfluidics to assemble different types of functional micro- and nanomaterials. In addition, she developped new microfluidic devices that enable the production of very small, airborne drops as well as devices that produce highly monodisperse emulsion drops at a very high throughput. In June 2014, Esther joined the material science department (IMX) of EPFL where she is leading the Soft Materials Laboratory (SMAL).
Michaël UnserExpertise
Image Processing, Medical Imaging, Biological Imaging, Wavelets, Splines, Multiresolution
Michael Unser is Full Professor with EPFL’s school of Engineering and the academic director of EPFL's Center for Imaging, Lausanne, Switzerland. His primary areas of investigation are signal processing, biomedical imaging and applied functional analysis. He is internationally recognized for his research contributions to sampling theory, wavelets, the use of splines for image processing, stochastic processes,
Daniel SageExpertise
PublicationsPublications
Coordinates Biomedical Imaging GroupAddressEPFL STI-IMT-LIB, BM 4.135, Station 17, CH-1015 Lausanne, SwitzerlandTel.+41 21 693 51 89Fax.+41 21 693 68 10Emaildaniel.sage@epfl.chWeb pagehttp://bigwww.epfl.ch/sage/OfficeBM 4.135
Teaching & PhD Past EPFL PhD Students as codirector Daniel Andreas Schmitter, Anaïs Badoual, Laurène Donati Courses Bioimage informatics BIO-410 The course provides a comprehensive overview of methods, algorithms, and computer tools us Mohamed FarhatM. Farhat was born in Casablanca in 1962 (Moroccan citizen). He graduated at Ecole Nationale Supérieure d'Hydraulique et de Mécanique de Grenoble (France. He joined The LMH laboratory in 1986 as research assistant. He completed in 1994 a Ph.D. thesis on Cavitation. He joined the R&D department of Hydro-Quebec in Montréal (Canada) in 1995 where he was in charge of several research projects in the areas of production and transportation of hydropower and mainly the monitoring of large hydro turbines. Since 2001, he is senior scientist at the LMH laboratory, head of the cavitation group. He is also lecturer in Master and Doctoral programs. He is member of the Doctoral Committee in Mechanics.
Andreas PautzTeaching & PhD PhD Students Sofia Portolan, Michel Saliba, Bishal Torrente, Alexis Paul Boris Claude Dupont-Bembinoff, Cynthia Camila Güttlein Past EPFL PhD Students Ting Zhu, Vladimir Vladimirov Brankov, Boris Aviv Hombourger, Damar Canggih Wicaksono, Petra Mala, Adolfo Rais, Valentyn Bykov, Daniel Jerôme Siefman, Evgeny Nikitin, Dionysios Chionis, Oskari Ville Pakari, Friederike Bostelmann, Jiani Gao, Efstathios Vlassopoulos, Alessandro Scolaro, Stefan Radman, Alexander Aures, Lubomír Bures, Ahmed Salah
Yves BellouardDr. Yves Bellouard is Associate Professor in Microengineering at Ecole Polytechnique Fédérale de Lausanne (EPFL) in Switzerland, where he heads the Galatea lab and the Richemont Chair in micromanufacturing. He received a BS in Theoretical Physics and a MS in Applied Physics from Université Pierre et Marie Curie in Paris, France in 1994-1995 and a PhD in Microengineering from Ecole Polytechnique Fédérale de Lausanne (EPFL) in Lausanne, Switzerland in 2000. For his PhD work, he received the Omega Scientific prize (2001) for outstanding contribution in the field of microengineering for his work on Shape Memory Alloys. Before joining EPFL in 2015, he was Associate Professor at Eindhoven University of Technologies (TU/e) in the Netherlands and prior to that, Research Scientist at Rensselaer Polytechnic Institute (RPI) in Troy, New York for about four years where he started working on femtosecond laser processing of glass materials. From 2010 until 2013, Yves Bellouard initiated and coordinated the Femtoprint project, a European research initiative aiming at investigating a table-top printer for microsystems ('3D printing of microsystems'). In 2013, he received a prestigious ERC Starting Grant (Consolidator-2012) from the European Research Council and a JSPS Fellowship from the Japan Society for the Promotion of Science. His current research interests are on new paradigms for system integration at the microscale and in particular laser-based methods to tailor material properties for achieving higher level of integration in microsystems, like for instance integrating optics, mechanics and fluidics in a single monolith. These approaches open new opportunities for direct-write methods of microsystems (3D printing). Personal website
