Mediaspace scheduled maintenance: Aug 25, 2026 07:00 - 12:00 AM. During this time, videos will be temporarily unavailable. Check status updates.

Concept

Manufacturing

Related publications (29)

Optimizing Manufacturing Efficiency: A Six-Sigma DMAIC Approach to Reduce Operational Gaps

Jérôme Chenal, Baraka Jean-Claude Munyaka

This study applies Six-Sigma DMAIC methodology to enhance the efficiency of a manufacturing production line, specifically targeting the "gaps" between planned and actual working time. Key findings reveal that meetings, scanning, follow-up activities, walki ...

2024

Lithium tantalate photonic integrated circuits for volume manufacturing

Tobias Kippenberg, Johann Emmeram Riemensberger, Mikhail Churaev, Xinru Ji, Zihan Li, Terence Albert Emile Blésin, Chengli Wang, Junyin Zhang, Xi Wang, Chen Yang, Wil Kao, Alisa Davydova

Electro-optical photonic integrated circuits (PICs) based on lithium niobate (LiNbO3) have demonstrated the vast capabilities of materials with a high Pockels coefficient1,2. They enable linear and high-speed modulators operating at complementary metal–oxi ...

2024

Additive Manufacturing of Bioinspired Mineral-Based Composites

Ran Zhao

Biominerals are used by natural organisms for example as structural supports and optical sensors. They are produced from a limited number of elements and under ambient conditions. Nevertheless, they often possess excellent mechanical properties and sometim ...

EPFL2024

Pivot, process for manufacturing such a pivot, oscillator comprising such a pivot, watch movement and timepiece comprising such an oscillator

Simon Nessim Henein, Loïc Benoît Tissot-Daguette

The present invention concerns a pivot comprising two assemblies, namely a central assembly (401) and a peripheral assembly (400). These two assemblies are mobile in rotation relative to each other around an axis of rotation (A). The pivot is characterized ...

2024

Dislocation Hardening in a New Manufacturing Route of Ferritic Oxide Dispersion-Strengthened Fe-14Cr Cladding Tube

Roland Logé

The microstructure evolution associated with the cold forming sequence of an Fe-14Cr-1W-0.3Ti-0.3Y2O3 grade ferritic stainless steel strengthened by dispersion of nano oxides (ODS) was investigated. The material, initially hot extruded at 1100 degrees C an ...

MDPI2024

Diaryl ether compound and manufacturing method from lignin

Paul Joseph Dyson, Mingyang Liu

Herein described are diaryl ether compounds having the structure (I) as well as a method for their manufacture from lignin. ...

2023

Lithium tantalate photonic integrated circuits for volume manufacturing

Tobias Kippenberg, Chengli Wang

Dataset for the manuscript "Lithium tantalate photonic integrated circuits for volume manufacturing". DOI: 10.1038/s41586-024-07369-1 Contains all raw data and code used to produce the Figures and Extended Data Figures in the manuscript. ...

EPFL Infoscience2023

First developments towards producing inductive magnetic sensors using state-of-the-art photolithography techniques

Duccio Testa, Ambrine Douhane, Marcus Cemes

Inductive magnetic sensors are needed for tokamak operation to provide the low-frequency (LF) measurements leading to the equilibrium reconstruction and to monitor the higher frequency (HF) instabilities; the HF magnetic sensors are often also used as a ba ...

2023

Determinants of urban environmental quality in Morocco: The roles of energy consumption, urbanization, manufacturing, and financial development in SDG 13

Jérôme Chenal

Studies on urban environmental quality are evolving emphasizing the need for policy response concerning the enactment of environmental regulations to attain sustainable development goals (SDGs), mainly target 13. Over the years, the concerns to improve urb ...

FRONTIERS MEDIA SA2023

Biocompatible and Biodegradable 3D Printing from Bioplastics: A Review

Sandro Carrara

There has been a lot of interest in developing and producing biodegradable polymers to address the current environmental problem caused by the continued usage of synthetic polymers derived from petroleum products. Bioplastics have been identified as a poss ...

MDPI2023

Autologous and Allogeneic Cytotherapies for Large Knee (Osteo)Chondral Defects: Manufacturing Process Benchmarking and Parallel Functional Qualification

Corinne Scaletta, Sandra Jaccoud, Philippe Abdel Sayed, Nathalie Hirt-Burri, Salim Elias Darwiche, Robin Martin

Cytotherapies are often necessary for the management of symptomatic large knee (osteo)-chondral defects. While autologous chondrocyte implantation (ACI) has been clinically used for 30 years, allogeneic cells (clinical-grade FE002 primary chondroprogenitor ...

MDPI2023

Design and manufacture of edible microfluidic logic gates

Dario Floreano, Bokeon Kwak, Shuhang Zhang

Edible robotics is an emerging research field with potential use in environmental, food, and medical scenarios. In this context, the design of edible control circuits could increase the behavioral complexity of edible robots and reduce their dependence on ...

IEEE2023

Laser powder bed fusion of Fe-based shape memory alloys for novel structural metamaterials and "smart" structures

Irene Ferretto

Laser powder bed fusion (LPBF) is a powder-based additive manufacturing (AM) technique, which shows great potential in the production of complex-shaped parts with unprecedented design freedom. In addition, it allows for an active manipulation of the micros ...

EPFL2023

Determining an optimum quantity of interleaved instruction streams of defined coroutines

Anastasia Ailamaki, Georgios Psaropoulos

A method for optimizing memory access for database operations is provided. The method may include performing a first database operation by at least executing a first instruction stream associated with the first database operation. The first database opera ...

2023

Electrode Impact on the Electrical Breakdown of Dielectric Elastomer Thin Films

Herbert Shea, Fabio Beco Albuquerque

Dielectric Elastomer Actuators (DEAs) enable the realization of energy-efficient and compact actuator systems. DEAs operate at the kilovolt range with typically microampere-level currents and hence minimize thermal losses in comparison to low voltage/high ...

MDPI2023

A multi scale consolidation model for press moulding of hybrid textiles into complex geometries

Vincent Werlen

Side-by-side hybrid textiles are an intermediate step for the production of fibre-reinforced thermoplastic composites. Press moulding these materials combining reinforcing fibre textiles and thermoplastic matrix textiles or flexible layers is a promising m ...

EPFL2023

Manufacturing and toughening effects on the material properties of wind turbine blade adhesives

Anastasios Vassilopoulos, Dharun Vadugappatty Srinivasan

Hybrid adhesives can be developed using commercially available adhesive materials and customized to the required loading conditions. In this paper, SPABONDTM 820HTA (non-toughened) and SPABONDTM 840HTA (toughened) adhesives are hybridized by two strategies ...

2022

Dielectrophoretic Traps for Efficient Bead and Cell Trapping and Formation of Aggregates of Controlled Size and Composition

Philippe Renaud, Arnaud Bertsch, Clémentine Sophie Sarah Lipp

We present a microfluidic dielectrophoretic-actuated system designed to trap chosen single-cell and form controlled cell aggregates. A novel method is proposed to characterize the efficiency of the dielectrophoretic trapping, considering the flow speed but ...

2022

Cost-Based Decision Support System: A Dynamic Cost Estimation of Key Performance Indicators in Manufacturing

Dimitrios Kyritsis, Foivos Psarommatis Giannakopoulos

An attempt is made to translate five generic key performance indicators (KPIs) into a continuous real-time cost function in a batch order-based manufacturing environment. The challenge of controlling and optimizing resource utilization, production efficien ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2022

A method

Fabien Sorin, Andreas Leber

A method of manufacturing a fibre comprising a lined channel, using a draw apparatus, the method comprising: providing a preform, comprising a channel extending through the preform, to the draw apparatus; feeding a liner into the channel; heating a portion ...

2022