Mediaspace scheduled maintenance: Aug 25, 2026 07:00 - 12:00 AM. During this time, videos will be temporarily unavailable. Check status updates.

Concept

Slip (materials science)

Related publications (31)

A low-temperature prismatic slip instability in Mg understood using machine learning potentials

William Curtin, Xin Liu, Binglun Yin

Prismatic slip in magnesium at temperatures T

PERGAMON-ELSEVIER SCIENCE LTD2023

Microscopic Digital Image Correlation Analysis of Strain Distributions in Stainless Steel 316L Induced by Multiaxial Cyclic Loading

Elif Cansu Kursun

Fatigue damage in materials results in localized strain at the microstructural level. In many engineering components of the cooling circuits of nuclear power plants, where austenitic steels are used, the material experiences multiaxial cyclic loading, eith ...

EPFL2023

The influence of lattice misfit on screw and edge dislocation-controlled solid solution strengthening in Mo-Ti alloys

William Curtin, Carolina Baruffi, You Rao

Mo-Ti alloys form solid solutions over a wide range of compositions, with lattice misfit parameters increasing significantly with titanium content. This indicates a strong increase in the critical stress for edge dislocation motion. Here, we probe the tran ...

SPRINGERNATURE2023

Strengthening mechanisms in dilute and random solid solution high-entropy BCC alloys

Alireza Ghafarollahi

Tuning the mechanical properties of metals, including strength, through adjusting the type and/or concentration of added solute elements, has been recognized as an effective way to design and produce materials with desired or optimized mechanical propertie ...

EPFL2022

Machine learning for metallurgy IV: A neural network potential for Al-Cu-Mg and Al-Cu-Mg-Zn

William Curtin, Daniel John Gilles Marchand

Most metallurgical properties, e.g., dislocation propagation, precipitate formation, can only be fully understood atomistically but most phenomena and quantities of interest cannot be measured experimentally. Accurate simulation methods are essential but f ...

2022

The thermally activated deformation behaviour of single-crystalline microcast aluminium wires

Andreas Mortensen, Léa Deillon, Suzanne Godelieve Alphonsine Verheyden

A microcasting process is used to produce high aspect ratio ( > 30) monocrystalline pure aluminium wires with a diameter between 14 and 115 mu m. The role of thermal activation in the plastic deformation of these microwires is measured by means of (single) ...

PERGAMON-ELSEVIER SCIENCE LTD2022

{10(1)over-bar2} twinning mechanism during in situ micro-tensile loading of pure Mg: Role of basal slip and twin-twin interactions

Roland Logé, Johann Michler, Xavier Maeder, Daniele Casari, Nicolò Maria Della Ventura

An SEM in situ uniaxial tensile testing setup allowing HR-EBSD acquisition during deformation was used to study the extension twinning mechanism in magnesium(Mg) at the micron scale. Structures were fabricated with two different crystal orientations, respe ...

2021

Theory of kink migration in dilute BCC alloys

William Curtin, Alireza Ghafarollahi

Plastic deformation in elemental BCC metals and dilute alloys is controlled by the slower of the kink pair nucleation and kink migration processes along screw dislocations. In alloys nucleation is facilitated and migration inhibited, leading to a concentra ...

2021

High energy barriers for edge dislocation motion in body-centered cubic high entropy alloys

William Curtin, Francesco Maresca, Alireza Ghafarollahi, Recep Ekin Kubilay

Recent theory proposes that edge dislocations in random body-centered cubic (BCC) high entropy alloys have high barriers for motion, conveying high strengths up to high temperatures. Here, the energy barriers for edge motion are computed for two model allo ...

NATURE RESEARCH2021

Analysis of double cross-slip of pyramidal I < c plus a > screw dislocations and implications for ductility in Mg alloys

William Curtin, Rasool Ahmad

Solute accelerated cross-slip of pyramidal < c + a > screw dislocations has recently been recognized as a crucial mechanism in enhancing the ductility of solid-solution Mg alloys. In pure Mg, cross-slip is ineffective owing to the energy difference between ...

PERGAMON-ELSEVIER SCIENCE LTD2020

Theory of double-kink nucleation in dilute BCC alloys

William Curtin, Alireza Ghafarollahi

Yielding in pure BCC metals and dilute substitutional alloys occurs by double-kink nucleation and propagation along screw dislocations. At low temperatures, the yield stress is controlled by double-kink nucleation. Here, an analytical statistical model is ...

PERGAMON-ELSEVIER SCIENCE LTD2020

Design of Ductile Rare-Earth-Free Magnesium Alloys

William Curtin, Binglun Yin, Rasool Ahmad

Pure Mg has low ductility due to a transition of < c+a > pyramidal dislocations to a sessile basal-oriented structure. Dilute alloying generally improves ductility. Enhancement of pyramidal cross-slip from the lower-energy pyramidal II plane to the higher- ...

SPRINGER INTERNATIONAL PUBLISHING AG2020

Statistical nature of the incipient plasticity in amorphous alloys

Shankha Nag

Statistical analyses of the first pop-in stress data, obtained by spherical tip-nanoindentation experiments on different metallic glasses (MGs) with tip radius, R-i, loading rate, (P) over dot, and structural state of the glass as experimental variables, s ...

PERGAMON-ELSEVIER SCIENCE LTD2020

Machine learning for metallurgy II. A neural-network potential for magnesium

William Curtin, Binglun Yin, Eleanor Yi Kei Mak, Markus Anthony Stricker

Interatomic potentials are essential for studying fundamental mechanisms of deformation and failure in metals and alloys because the relevant defects (dislocations, cracks, etc.) are far above the scales accessible to first-principles studies. Existing pot ...

2020

Theory of screw dislocation strengthening in random BCC alloys from dilute to "High-Entropy" alloys

William Curtin, Francesco Maresca

Random body-centered-cubic (BCC) "High Entropy" alloys are a new class of alloys, some having high strength and good ductility at room temperature and some having exceptional high-temperature strength. There are no theories of strengthening of screw disloc ...

PERGAMON-ELSEVIER SCIENCE LTD2020

Atomic Scale Investigations into the Origins of Ductility in Mg Alloys

Rasool Ahmad

The industrial applications of Mg, the lightest structural metal, and abundant in Earth's crust, are hampered by its low intrinsic ductility and low fracture toughness at room temperature which is attributed to the underlying less symmetric and plastically ...

EPFL2020

Deformation mechanisms in a superelastic NiTi alloy: An in-situ high resolution digital image correlation study

Helena Van Swygenhoven

An in-situ high resolution digital image correlation investigation during uniaxial tensile deformation reveals the recoverable and the non-recoverable strain mechanisms in a Ni51Ti49 alloy with a mean grain size of 35 mu m. Recoverable strain is due to the ...

2020

Fault Stability Across the Seismogenic Zone

François Xavier Thibault Passelègue

Across the seismogenic zone, the transition from brittle to plastic deformation corresponds to a semibrittle regime where brittle fracturing and plastic flow coexist at high strength conditions. Thorough experimental investigations on brittle-plastic trans ...

AMER GEOPHYSICAL UNION2020

Moire Flat Bands in Twisted Double Bilayer Graphene

Oleg Yazyev, Quansheng Wu, Seyedeh Fatemeh Haddadi Givi

We investigate twisted double bilayer graphene (TDBG), a four-layer system composed of two AB-stacked graphene bilayers rotated with respect to each other by a small angle. Our ab initio band structure calculations reveal a considerable energy gap at the c ...

AMER CHEMICAL SOC2020

Mechanistic origin of high strength in refractory BCC high entropy alloys up to 1900K

William Curtin, Francesco Maresca

The body centered cubic (BCC) high entropy alloys (HEAs) MoNbTaW and MoNbTaVW show exceptional strength retention up to 1900K. The mechanistic origin of the retained strength is unknown yet is crucial for finding the best alloys across the immense space of ...

PERGAMON-ELSEVIER SCIENCE LTD2020