Concept

Natural rubber

Related publications (23)

Parity in bacterial communities and resistomes: Microplastic and natural organic particles in the Tyrrhenian Sea

Florian Frédéric Vincent Breider, Sylvain Coudret

Petroleum-based microplastic particles (MPs) are carriers of antimicrobial resistance genes (ARGs) in aquatic environments, influencing the selection and spread of antimicrobial resistance. This research characterized MP and natural organic particle (NOP) ...

2024

Autonomous oil flow generated by self-oscillating polymer gels

Vito Cacucciolo

The previously reported gel and polymer actuators require external inputs, such as batteries, circuits, electronic circuits, etc., compared with autonomous motions produced by the living organisms. To realize the spontaneous motions, here, we propose to in ...

Nature Research2020

Printing on liquid elastomers

Pedro Miguel Nunes Pereira de Almeida Reis, Pierre-Thomas Paul Brun

In recent years the research community has paid significant attention to geometrically engineered materials. These materials derive their unique properties from their structure rather than their chemistry alone. Despite their success in the laboratory, the ...

ROYAL SOC CHEMISTRY2020

Transpiration on the rebound in lowland Sumatra

Thomas Guillaume, Mitsunori Nomura

Following large-scale conversion of rainforest, rubber and oil palm plantations dominate lowland Sumatra (Indonesia) and other parts of South East Asia today, with potentially far-reaching ecohydrological consequences. We assessed how such land-use change ...

ELSEVIER SCIENCE BV2019

"Divergent Total Synthesis of (-)-Rhazinilam, (-)-Leucomidine B and (+)-Leuconodine F" and "Synthetic Studies Towards Sarpagine-Related Indoles"

Dylan Jean Robert Dagoneau

The work presented in this thesis focuses on the synthesis of monoterpene indole alkaloids. The first part describes the divergent total synthesis of (-)-rhazinilam, (-)-leucomidine B and (+)-leuconodine F, three structurally distinct natural products of t ...

EPFL2017

Healing of a glass fibre reinforced composite with a disulphide containing organic-inorganic epoxy matrix

Véronique Michaud, Amaël Maximilien Cohades

We report the development of an intrinsic healing glass fibre reinforced polymer (GFRP) composite based on a disulphide-containing organic-inorganic thermoset matrix. Thermomechanical experiments showed that the newly developed matrix has a combination of ...

Elsevier2017

Economical Analysis of a Pressurized Fluid-Based Process Applied for Phytochemicals Recovery in a Sustainable Biorefinery Concept for Brazilian Ginseng Roots

François Maréchal

A growing number of technologies are being developed in order to produce different high added value products, such as phytochemicals, ethanol and other chemicals from biomass, representing an important trend that needs to be evaluated. The use of pressuriz ...

Aidic Servizi Srl2016

Sensitivity and resistance of soil fertility indicators to land-use changes: New concept and examples from conversion of Indonesian rainforest to plantations

Thomas Guillaume

Tropical forest conversion to agricultural land leads to a strong decrease of soil organic carbon (SOC) stocks. While the decrease of the soil C sequestration function is easy to measure, the impacts of SOC losses on soil fertility remain unclear. Especial ...

Elsevier Science Bv2016

Advanced Materials Enabling High-Volume Road Transport Applications of Lightweight Structural Composite Parts

Jan-Anders Edvin Maansson, Véronique Michaud

Current applications of carbon fibre reinforced plastics (CFRP) can be found mostly in sectors where their use is not principally cost-driven and which have limited production volumes, such as aerospace and sports cars. In order to achieve a step-change in ...

Sampe Publishers2014

Integrated active tracking detector for MRI-guided interventions

Giovanni Boero, Jens Anders

We present a fully integrated detector suitable for active tracking of interventional devices in MR-guided interventions. The single-chip microsystem consists of a detection coil, a tuning capacitor, an intermediate frequency downconversion receiver, and a ...

Wiley2012

Small strain mechanical properties of latex-based acrylic nanocomposite films

Jan-Anders Edvin Maansson, John Christopher Plummer

A waterborne latex-based technique has been used to prepare acrylic films with laponite contents up to about 25 vol%. The laponite was attached to the surfaces of the latex particles, giving a cellular arrangement of laponite-rich regions at high laponite ...

2011

Evaluation of residual strains in epoxy with different nano/micro-fillers using embedded fiber Bragg grating sensor

John Botsis, Marco Lai

The Influence of SiO2 nanoparticles and rubber micro-fillers on the mechanical and thermal responses of an epoxy based composite is investigated using classical quantitative thermo-mechanical testing (tensile tests DMTA TMA) microstructural analysis (Micro ...

2010

Highly filled polymer nanocomposite films derived from novel nanostructured latexes

The overall aim of this thesis has been to assess the potential of latex-based technologies for the preparation of polymer/clay nanocomposites. The key feature of latex-based technologies is that they offer the possibility of improved control of the final ...

EPFL2010

Carbon outclasses wood in racket paddles: Ratings of expert and intermediate tennis players

Jan-Anders Edvin Maansson, Michael Herzog, Olaf Blanke, Véronique Michaud, Christian Fischer

Wooden racket paddles were modified with rubber and carbon fibre laminates and their differences tested in terms of flexural, damping, and coefficient of restitution properties. Four rackets types were designed: a wood reference, wood with rubber, carbon f ...

Taylor & Francis2010

Assessing the Role of Poly(ethylehe glycol-bl-propylene sulfide) (PEG-PPS) Block Copolymers in the Preparation of Carbon Nanotube Biocompatible Dispersions

Davide Demurtas, Jeffrey Alan Hubbell

Amphiphilic block copolymers based on hydrophobic polysulfides (poly(propylene sulfide), PPS) and hydrophilic polyethers (poly(ethylene glycol), PEG) have been used to solubilize and disperse single-walled carbon nanotubes (SWNTs). The obtained highly conc ...

American Chemical Society2010

Fracture mechanisms in polystyrene/laponite nanocomposites prepared by emulsion polymerization

Jan-Anders Edvin Maansson, John Christopher Plummer

Transmission electron microscopy (TEM) has been used to investigate the effect of laponite clay on microdeformation in thin latex-based polystyrene (PS) films, in which the laponite was concentrated at the original interfaces between the PS particles. At r ...

2009

Material and structural performance of fiber-reinforced polymer composites at elevated and high temperatures

Yu Bai

As the range of applications for fiber-reinforced polymer (FRP) composite materials in civil engineering constantly increases, there is more and more concern with regard to their performance in critical environments. The fire behavior of composite material ...

EPFL2009

Sulfur as pollutant species on the cathode side of a SOFC system

Jan Van Herle, Aïcha Hessler-Wyser, Josef Andreas Schuler

Sulfur poisoning in a strontium doped lanthanum cobaltite (LSC) cathode current collection layer was revealed in a solid oxide fuel cell (SOFC) tested in repeat-element and stack configuration. Sources of sulfur contamination, other than trace SOx in air, ...

2009

Prediction of the twisting moment and axial force in a circular rubber cylinder for combined extension and torsion based on the logarithmic strain approach

Anastasios Vassilopoulos

The scope of the present work is the application of a particular class of strain energy function, based on the logarithmic strain, for the prediction of the twisting moment and axial force of a rubber circular cylinder under combined extension and torsion. ...

2008

Structure et mécanismes de microdéformation de polymethylmethacrylates renforcés au choc

Laure Dupuits Lalande

Polymethylmethacrylate (PMMA) is used in many applications requiring good optical properties, resistance to ageing and resistance to UV irradiation, in spite of its relatively poor mechanical response to impact loading. In order to extend the range of appl ...

EPFL2007