Mediaspace scheduled maintenance: Aug 25, 2026 07:00 - 12:00 AM. During this time, videos will be temporarily unavailable. Check status updates.

Concept

Circular economy

Related publications (19)

RE:SLAB — a load bearing system for open-ended component reuse in building structures

Corentin Jean Dominique Fivet, Jan Friedrich Georg Brütting, Dario Redaelli, Alex-Manuel Muresan, Edisson Xavier Estrella Arcos

The construction industry plays a major role in the high levels of greenhouse gas emissions, resource consumption, and waste generation observed nowadays. Key to the circular economy, structural component reuse arises as a promising solution to divert cons ...

2024

Acids from fruits generate photoactive Fe-complexes, enhancing solar disinfection of water (SODIS): A systematic study of the novel " fruto-Fenton " process, effective over a wide pH range (4-9)

César Pulgarin, Stefanos Giannakis, Aline Laetitia Schaub

This study aimed to enhance solar disinfection (SODIS) by the photo-Fenton process, operated at natural pH, through the re-utilization of fruit wastes. For this purpose, pure organic acids present in fruits and alimentary wastes were tested and compared wi ...

Pergamon-Elsevier Science Ltd2024

A Reuse-Ready Timber Slab-and-Column System for Modular Building Structures

Corentin Jean Dominique Fivet, Jan Friedrich Georg Brütting, Jonas Warmuth, Edisson Xavier Estrella Arcos, Alex-Manuel Muresan

The construction industry is a significant contributor to resource consumption and waste generation. To address this issue, component reuse has been proposed as a way to prevent valuable building elements from being discarded and avoid producing new ones. ...

Curran Associates, Inc.2023

Multiscale pattern analysis of building replacements in Zurich from 2000 to 2019

Corentin Jean Dominique Fivet, Jingxian Ye

Building replacement (BR) – i.e., the demolition of existing structures and subsequent construction of new buildings on the same site – is often understood as a necessary urban planning strategy despite significant environmental implications regarding soli ...

2023

Interactive design with optimum matchmaking of reused structural elements – a software implementation

Corentin Jean Dominique Fivet, Jan Friedrich Georg Brütting, Jonas Warmuth

Structural systems are a significant contributor to buildings’ embodied carbon and reusing structural elements in new load-bearing applications is one strategy to reduce this impact. However, integrating this approach into existing design workflows without ...

International Association for Shell and Spatial Structures (IASS)2023

Circularity by stock in Sri Lanka: Economic necessity meets urban fabric renovation

Paolo Tombesi, Milinda Pathiraja

Persistent fiscal and political mismanagement, together with the financial pressures of the COVID-19 pandemic, have driven Sri Lanka into a social and economic crisis triggering a decrease in national foreign exchange reserves, an inability to purchase vit ...

FRONTIERS MEDIA SA2023

Experimental investigation on the bending response of reuse-ready timber slabs – The Pixel Slab System

Corentin Jean Dominique Fivet, Edisson Xavier Estrella Arcos, Johnny Syriani

Current construction practices follow linear economic models of "take-make-dispose" that result in substantial material landfilling after the end-of-life of buildings. This issue takes relevance given the construction industry's significant stake in the hi ...

International Association for Shell and Spatial Structures (IASS)2023

A multi-material robotic finger with integrated proprioceptive and tactile capabilities produced with a circular process

Josephine Anna Eleanor Hughes, Kai Christian Junge, Antonia Georgopoulou Papadonikolaki

When developing or designing biomimetic robotic fingers with rigid and soft components and integrated sensors, fabrication is often a bottle-neck when assembling and casting processing techniques are used. This study introduces a thermoplastic multi-materi ...

IEEE2023

Reuse of concrete components in new construction projects: Critical review of 77 circular precedents

Corentin Jean Dominique Fivet, Maléna Bastien Masse, Célia Marine Küpfer

Extracting pieces of concrete from obsolete buildings and reusing them, as is, in new assemblies is today rarely considered a strategy for improving the sustainability of the construction sector. By delaying the crushing of concrete into aggregates and avo ...

2023

Governance framework for autonomous and cognitive digital twins in agile supply chains

Dimitrios Kyritsis

Cognitive Digital twins (CDT) are Digital Twins with cognition capabilities and ensure a proper monitoring and optimization of a specific asset's behaviour. In the context of supply chains, there are different entities involved from assets, processes, up t ...

ELSEVIER2023

Biocompatible and Biodegradable 3D Printing from Bioplastics: A Review

Sandro Carrara

There has been a lot of interest in developing and producing biodegradable polymers to address the current environmental problem caused by the continued usage of synthetic polymers derived from petroleum products. Bioplastics have been identified as a poss ...

MDPI2023

Action Levers towards Sustainable Wellbeing: Re-Thinking Negative Emissions, Sufficiency, Deliberative Democracy

Sascha Nick

Systems theory defines leverage points as places to intervene in order to change a system. Points with high impact on system behavior are notoriously hard to act upon, and indeed most policy intervention is based at the lowest level (#12 in Donella Meadows ...

EPFL2023

Environmental and economic analysis of new construction techniques reusing existing concrete elements: two case studies

Corentin Jean Dominique Fivet, Maléna Bastien Masse, Célia Marine Küpfer, Julie Rachel Devènes

As the most widely used construction material worldwide, concrete is the main cause of greenhouse gas emissions, material depletion, and waste generation by the construction industry. Typically, concrete waste is crushed and, at best, reclaimed into recycl ...

2022

Trends in mitigation of industrial waste: Global health hazards, environmental implications and waste derived economy for environmental sustainability

Edgard Gnansounou

Majority of industries, in order to meet the technological development and consumer demands generate waste. The untreated waste spreads out toxic and harmful substances in the environment which serves as a breeding ground for pathogenic microorganisms thus ...

ELSEVIER2022

Towards a negative-emission society

Xiang Li

Negative carbon emissions are proved necessary to limit global temperature increase below 1.5C compared to pre-industrial levels. (a) Reducing carbon sources and (b) increasing negative emissions are two effective ways to achieve this goal. (a) involves th ...

EPFL2022

Scrutinizing the Circular Economy concept applied at the urban level: A contribution based on the analysis of urban circularity indicators, the categorization of Circular Economy interventions, and the identification of factors fostering the adoption of circular innovation

Valeria Superti

Problem. Our current economic systems are deemed unsustainable. Although a global issue, the objective of living in a sustainable society is increasingly an urban challenge, as a rising 50% of the world's population currently dwell in cities. To secure a b ...

EPFL2021

A systemic framework to categorize Circular Economy interventions: An application to the construction and demolition sector

Claudia Rebeca Binder Signer, Valeria Superti, Cynthia Houmani

The Circular Economy (CE) concept has recently gained momentum as a perspective to tackle global challenges such as resource scarcity and waste management. Multiple types of interventions have been proposed to support the transition towards a CE. This pape ...

2021

Strategies for a Circular Economy in the Construction and Demolition Sector: Identifying the Factors Affecting the Recommendation of Recycled Concrete

Claudia Rebeca Binder Signer, Ralph Hansmann, Ivo Philippe Baur, Valeria Superti, Cynthia Houmani

With increasing urbanisation, new approaches such as the Circular Economy (CE) are needed to reduce resource consumption. In Switzerland, Construction & Demolition (C&D) waste accounts for the largest portion of waste (84%). Beyond limiting the depletion o ...

2021

Unraveling how the concept of circularity relates to sustainability: An indicator-based meta-analysis applied at the urban scale

Claudia Rebeca Binder Signer, Albert Merino, Valeria Superti

Cities account for 75% of resource consumption and 80% of CO2 emissions. With rising urbanization, achieving urban sustainability becomes crucial. The Circular Economy (CE) concept has been proposed to reduce resource consumption, although its link to sust ...

2021