Touradj EbrahimiTouradj EBRAHIMI received his M.Sc. and Ph.D., both in Electrical Engineering, from the Swiss Federal Institute of Technology (EPFL), Lausanne, Switzerland, in 1989 and 1992 respectively. In 1993, he was a research engineer at the Corporate Research Laboratories of Sony Corporation in Tokyo, where he conducted research on advanced video compression techniques for storage applications. In 1994, he served as a research consultant at AT&T Bell Laboratories working on very low bitrate video coding. He is currently Professor at EPFL heading its Multimedia Signal Processing Group. He is also the Convenor of JPEG standardization Committee. He was also adjunct Professor with the Center of Quantifiable Quality of Service at Norwegian University of Science and Technology (NTNU)from 2008 to 2012.
Prof. Ebrahimi has been the recipient of various distinctions and awards, such as the IEEE and Swiss national ASE award, the SNF-PROFILE grant for advanced researchers, Four ISO-Certificates for key contributions to MPEG-4 and JPEG 2000, and the best paper award of IEEE Trans. on Consumer Electronics . He became a Fellow of the international society for optical engineering (SPIE) in 2003. Prof. Ebrahimi has initiated more than two dozen National, European and International cooperation projects with leading companies and research institutes around the world. He is a co-founder of Genista SA, a high-tech start-up company in the field of multimedia quality metrics. In 2002, he founded Emitall SA, start-up active in the area of media security and surveillance. In 2005, he founded EMITALL Surveillance SA, a start-up active in the field of privacy and protection. He is or has been associate Editor with various IEEE, SPIE, and EURASIP journals, such as IEEE Signal Processing Magazine, IEEE Trans. on Image Processing, IEEE Trans. on Multimedia, EURASIP Image Communication Journal, EURASIP Journal of Applied Signal Processing, SPIE Optical Engineering Magazine. Prof. Ebrahimi is a member of Scientific Advisory Board of various start-up and established companies in the general field of Information Technology. He has served as Scientific Expert and Evaluator for Research Funding Agencies such as those of European Commission, The Greek Ministry of Development, The Austrian National Foundation for Scientific Research, The Portuguese Science Foundation, as well as a number of Venture Capital Companies active in the field of Information Technologies and Communication Systems. His research interests include still, moving, and 3D image processing and coding, visual information security (rights protection, watermarking, authentication, data integrity, steganography), new media, and human computer interfaces (smart vision, brain computer interface).
He is the author or the co-author of more than 200 research publications, and holds 14 patents. Prof. Ebrahimi is a member of IEEE, SPIE, ACM and IS&T.
See the URL below for more details:
http://mmspl.epfl.ch Jürgen BruggerI am a Professor of Microengineering and co-affiliated to Materials Science. Before joining EPFL I was at the MESA Research Institute of Nanotechnology at the University of Twente in the Netherlands, at the IBM Zurich Research Laboratory, and at the Hitachi Central Research Laboratory, in Tokyo, Japan. I received a Master in Physical-Electronics and a PhD degree from Neuchâtel University, Switzerland. Research in my laboratory focuses on various aspects of MEMS and Nanotechnology. My group contributes to the field at the fundamental level as well as in technological development, as demonstrated by the start-ups that spun off from the lab. In our research, key competences are in micro/nanofabrication, additive micro-manufacturing, new materials for MEMS, increasingly for wearable and biomedical applications. Together with my students and colleagues we published over 200 peer-refereed papers and I had the pleasure to supervise over 25 PhD students. Former students and postdocs have been successful in receiving awards and starting their own scientific careers. I am honoured for the appointment in 2016 as Fellow of the IEEE “For contributions to micro and nano manufacturing technology”. In 2017 my lab was awarded an ERC AdvG in the field of advanced micro-manufacturing.
Rosane Moura Dos Santos BarrettinoEducation Ph.D. in Materials Science and Technology | "Development of a Novel Electrically Conductive FlameRetardant Bio-based Thermoplastic Polyurethane" 2012 – 2015 Polytechnic of Turin, Turin, Italy Master of Science in Engineering | “Preparation and Characterization of ThermoplasticElastomer Micro and Nanocomposites with Modify Tribology Properties†2009 – 2011 University of Applied Sciences of Southern Switzerland (SUPSI), Manno, Switzerland. BSc in Che
Mihai Adrian IonescuAdrian M. Ionescu is Full Professor at the Swiss Federal Institute of Technology, Lausanne, Switzerland. He received the B.S./M.S. and Ph.D. degrees from the Polytechnic Institute of Bucharest, Romania and the National Polytechnic Institute of Grenoble, France, in 1989 and 1997, respectively. He has held staff and/or visiting positions at LETI-CEA, Grenoble, France and INP Grenoble, France and Stanford University, USA, in 1998 and 1999. Dr. Ionescu has published more than 600 articles in international journals and conferences. He received many Best Paper Awards in international conferences, the Annual Award of the Technical Section of the Romanian Academy of Sciences in 1994 and the Blondel Medal in 2009 for contributions to the progress in engineering sciences in the domain of electronics. He is the 2013 recipient of the IBM Faculty Award in Engineering. He served the IEDM and VLSI conference technical committees and was the Technical Program Committee (Co)Chair of ESSDERC in 2006 and 2013. He is a member of the SATW. He is director of the Laboratory of Micro/Nanoelectronic Devices (NANOLAB).
Simon Elias BibriExpertise
• Sustainable cities• Smarter eco-cities• Sustainable smart cities• Artificial Intelligence of Things (AIoT) • Generative Artificial Intelligence of Things (GAIoT)• Foundation Models (FMs) • Quantum Generative Artificial Intelligence (QGAI)• Urban Digital Twins (UDTs)• Urban Brain (UB) • Smart Circular Metabolism• Urban planning and design• Environmental sustainability and climate resilience• Sustainable smart energy• Sustainable smart transportation• Sustainable smart waste and water management•
Diego Ruben BarrettinoDiego Barrettino (S’93–M’98–SM’06) received the Dipl.-Ing. degree in Electronic Engineering from the University of Buenos Aires, Argentina, in 1997, and the Ph.D. degree in Electrical Engineering from the Swiss Federal Institute of Technology Zurich (ETHZ) in 2004.
He worked at Allegro MicroSystems Inc., from 1997 to 2000, where he was an Analog IC Designer of Hall-effect magnetic sensors. From 2000 to 2004, he was a Ph.D. student and Research Assistant at ETHZ, where he designed chemical and mechanical sensors. In 2004, he moved to the USA where he designed biomedical devices first as a Post-Doctoral Research Associate in the University of Washington, and then as an Assistant Professor in the University of Hawaii. In 2006, he returned to Europe where he joined the Swiss Federal Institute of Technology Lausanne (EPFL) as a Senior Research Scientist for the design and development of biosensors using organic nanotransistors. From 2007 to 2009, he was a Senior Lecturer in the University of Glasgow, U.K., and in the University College Cork, Republic of Ireland, where he designed ultra-low power biomedical devices. From 2009 to 2017, he was Full Professor and Head of the Laboratory of Microelectronics, Bioelectronics and Sensor Systems (LMBS) at the University of Applied Sciences of Southern Switzerland (SUPSI), where he designed smart contact lenses and eye implants. In 2017, he joined both the Lucerne University of Applied Sciences (HSLU) and EPFL as a part-time Senior Research Scientist to continue his work on smart sensor systems.
His research interests are in the fields of physical, chemical, and biomedical microsensors; sensor fusion algorithms; analog and mixed-signal IC design; MEMS; embedded systems; avionics and bioelectronics.
Diego Barrettino is a senior member of the Institute of Electrical and Electronics Engineers (IEEE), a member of the American Institute of Aeronautics and Astronautics (AIAA) and a member of the American Association for the Advancement of Science (AAAS).
Maher KayalMaher Kayal received M.S. and Ph.D degrees in electrical engineering from the Ecole Polytechnique Fédérale de Lausanne (EPFL, Switzerland) in 1983 and 1989 respectively. He has been with the Electronics laboratories of the Ecole Polytechnique Fédérale de Lausanne (EPFL, Switzerland) since 1990, where he is currently a professor and director of the Energy Management and Sustainability" section. He has published many scientific papers, coauthor of three text books dedicated to mixed-mode CMOS design and he holds eleven patents. His technical contributions have been in the area of analog and Mixed-signal circuits design including highly linear and tunable sensors microsystems, signal processing and green energy management.
Prizes and Honors
Electronics Letters journal Premium Award 2013,
Outstanding Paper Award? IEEE Mixdes 2013
Basil Papadias paper Award, IEEE Powertech 2013
Best Paper Awards, Mixdes 2013
Best Paper Awards, ICCAS 2012
Outstanding Paper Award- IEEE Mixdes 2012.
Poland Section IEEE ED Chapter special award in 2011.
Credit Suisse Award for Best Teaching- 2009.
The William M. Portnoy Award at the Energy Conversion Congress and Exposition , California Sept 2009.
Best Paper Award - IEEE-Mixdes 2009.
High Quality Paper - IEEE Power Tech Conference June 2009.
Best Paper Award - IEEE-Mixdes 2007.
Best Paper Award - IEEE-TTTC International Conference on Automation, Quality and Testing, Robotics - 2006.
Best Application Specific Integrated Circuit at the International European Design and Test Conference ED&TC - 1997.
Ascom Award for the Best Work in Telecommunication Fields 1990.
Publications Books.
Books:
Methodology for the Digital Calibration of Analog Circuits and Systems, Marc Pastre & Maher Kayal. Springer Publisher- (ISBN 1-4020-4252-3)-2006.
Structured Analog CMOS Design, Danica Stefanovic & Maher Kayal. Springer Publisher-(ISBN 978-1-4020-8572-7)-2008.
Linear CMOS RF Amplifiers for Wireless Applications, Maher Kayal, Springer Publisher. (ISBN 978-90-481-9360-8)-2010.
Coeditor of Microelectronics Education Kluwer Academic Publishers. (ISBN 1-4020-2072-4). -2004.
Bertrand Hervé Laurent LacourTeaching & PhD Courses Introduction to mechanical design ME-105 The ME-105 course aims at acquiring the standardized language of the technical communication in the field of mechanical engineering and a basis in technical culture, through a review of the concepts, components, and methodologies, and the achievement by the students of a group-based project. Machining training course in Microtechnics MICRO-220 The Micro-220 machining practicum is a fundamental step in the enginee
César PulgarinProf. C. Pulgarin is Chemist from Lausanne University, Master in environmental chemistry from Geneva University, Ph D in synthesis bio-inspired of natural substances from Neuchâtel University. During his education he carried out several industrial trainings.
Since March 1989, he has been working at the EPFL where he is leader of the Advanced Oxidation Processes Group (GPAO) active in the development chemical, photochemical, electrochemical, ultrasonic processes, their coupling between them and with biological systems to degrade chemical and microbiological pollutants in water and air. He has an H index of 40 and he is the world most cited author in 1) TiO2 photo-assisted bacterial inactivation in water and 2) Coupling of photochemical and biological processes for pollutant degradation. He has been involved in ten African, South American and European international research projects. He has been Swiss representative in COST program 540.
Christophe MoserDr. Christophe Moser is
Associate Professor of Microengineering and Industrial Relations
at the Swiss Federal Institute of Technology in Lausanne. He was the co-founder and CEO of
Ondax,Inc
for ten years prior to joining EPFL. During this decade, he raised $15 million from corporate and venture capital sources to fund volume production of thick holographic components in glass and develop devices enabled by these components such as tunable add-drop multiplexers for telecommunications, ultra-narrowband notch filters for low frequency Raman systems, high power semi-conductor frequency-narrowed pumps for fiber lasers, single frequency fixed and tunable lasers for sensing and femtosecond pulse compressors for micro-machining applications. Dr. Moser has a Ph.D. in Electrical Engineering from the California Institute of Technology, a minor in finance and a bachelor degree in Physics from EPFL.
He is the co-inventor of 24 patents, 14 peer reviewed scientific publications, 9 IEEE proceedings and a book chapter.
Private interests include tennis, running, ski, basketball and family excursions.
2010: Associate Professor, EPFL, faculty
Science Technique Ingenieur.
2000-2010: co-founder, CEO Ondax, Inc.
1995-2000: Graduate Research Assistant,
California Institute of Technology.
1993-1995: Engineering Project manager ,
TESA.
1988-1993: Bachelor candidate in Physics, EPFL.
MAIN PUBLICATIONS:
Moser C., Havermeyer F,.Ultra-narrowband tunable laserline notch filter, Appl. Phys. B, 95 (3), pp 597-601, 2009.
Moser C. ,Ho L., Havermeyer F,. Self-aligned Non-dispersive External Cavity Tunable Laser, 16 (21), 16691-16696 Optics Express, 2008.
Steckman, GJ , Moser C. et al. Volume holographic grating wavelength stabilized laser diodes, IEEE J. Of Selected Topics in Quantum Electronics, (13), 672-678, 2007.
Buse K, Havermeyer F, Liu W., Moser C, Psaltis D. Holographic Filters , Book Chapter Photorefractive Materials and their Applications, 2005.
Havermeyer, F; Liu, WH; Moser, C, et al. Volume holographic grating-based continuously tunable optical filter , Opt. Eng. 43 (9), 2017-2021, 2004.
Moser C., Maravic I., Schupp B., Adibi A, Psaltis D, Diffraction efficiency of localized holograms in doubly doped LiNbO3 crystals, Opt. Lett. 25: (17),1243-1245, 2000. Stefano MischlerStefano Mischler obtained the diploma in materials science in 1983 at the Swiss Federal Institute of Technology ETHZ in Zurich. He accomplished his PhD thesis in the field of surface analysis and corrosion at the Materials department of the Swiss Federal Institute of Technology EPFL in Lausanne in 1988. In the years 1989-1990 he held a postdoctoral position at the United Kingdom Atomic Energy Establishment in Harwell (Oxfordshire) where he developed novel quantification procedures for Auger Electron Spectroscopy and high lateral resolution surface analytical methods for fiber reinforced ceramics. In 1991 he joined the newly created Tribology group at the Laboratory for Metallurgical Chemistry of the EPFL where he developed research activities in the field of wear-corrosion interactions (tribocorrosion) and of tribological coatings. He is currently head of the tribology group and is developing a reserach and training activity devoted to modern aspects of tribology and surface science and technology, including surface chemical effects in tribology, biotribology and biocorrosion, tribology in microfabrication processes and wear protection methods. In 2006 he spent a sabbatical leave of 3 months at the Tokyo Medical and Dental University, Institute of Biomaterials.
