Mediaspace scheduled maintenance: Aug 25, 2026 07:00 - 12:00 AM. During this time, videos will be temporarily unavailable. Check status updates.

Concept

Adhesive

Related publications (29)

Selectively permeable microcapsules

Chuen-Ru Li

Microcapsules are appealing containers for delivering active ingredients, such as drugs and cosmetics, or conducting chemical and biological reactions on a small scale. To control the timing and location of release of these encapsulants, the shells of micr ...

EPFL2023

Rheological Properties of Ionically Crosslinked Viscoelastic 2D Films vs. Corresponding 3D Bulk Hydrogels

Esther Amstad, Gaia De Angelis

Ionically crosslinked hydrogels containing metal coordination motifs have piqued the interest of researchers in recent decades due to their self-healing and adhesive properties. In particular, catechol-functionalized bulk hydrogels have received a lot of a ...

AMER CHEMICAL SOC2023

Measuring electro-adhesion pressure before and after contact

Herbert Shea, Sylvain Thomas Schaller

Electro-adhesion (EA) is a low-power, tunable, fast and reversible electrically-controlled adhesion method, effective on both conducting and insulating objects. Typically, only the electro-adhesive detachment force, i.e., the force required to separate an ...

Nature Portfolio2023

A hybrid Selective Laser Sintering based process for the additive manufacturing of architectured composites

Erwan Philippe Guenier

Additive Manufacturing also commonly referred as 3D printing has been given a lot of interest lately. Market is growing exponentially and the aim for obtaining more complex and ready-to use parts is emerging. All the 3D printing processes consist in buildi ...

EPFL2023

Opportunities, Challenges, and Pitfalls in Making, Characterizing, and Understanding Polymer Brushes

Harm-Anton Klok

Polymer brushes have been theoretically described, their behavior under diverse conditions has been modeled, and their preparation via surface-initiated polymerizations (SIPs) has been progressively refined. However, despite three decades of research endea ...

American Chemical Society2023

Enhancement of Pressure-Sensitive Adhesive by CO2 Laser Treatment

Dario Floreano, Jun Shintake, Yegor Piskarev, Vivek Ramachandran

Pressure-sensitive adhesives (PSAs) are polymeric films that can be adhered to and detached from surfaces without leaving residue. Researchers are looking to enhance the bond strength between PSAs and different substrates. It can be achieved by tuning PSA' ...

2022

Manufacturing and toughening effects on the material properties of wind turbine blade adhesives

Anastasios Vassilopoulos, Dharun Vadugappatty Srinivasan

Hybrid adhesives can be developed using commercially available adhesive materials and customized to the required loading conditions. In this paper, SPABONDTM 820HTA (non-toughened) and SPABONDTM 840HTA (toughened) adhesives are hybridized by two strategies ...

2022

Extraction and controlled functionalization of lignin for materials applications

Stefania Bertella

Lignin is a renewable aromatic polymer that due to its abundance and unique chemical structure is a promising candidate to replace aromatic materials that are currently sourced from fossil oil. The same structure of lignin poses however drawbacks for its v ...

EPFL2022

Fire performance evaluation of GFRP-balsa sandwich bridge decks

Niloufar Vahedi

Bridges are a critical component of national infrastructures and economies. A significant percentage of bridges built all around the world are made of reinforced concrete which according to building codes have a life span between 80-100 years. However, str ...

EPFL2022

In situ growth of graphene on both sides of a Cu-Ni alloy electrode for perovskite solar cells with improved stability

Michael Graetzel

The instability of rear electrodes undermines the long-term operational durability of efficient perovskite solar cells. Here, a composite electrode of copper-nickel (Cu-Ni) alloy stabilized by in situ grown bifacial graphene is designed. The alloying makes ...

NATURE PORTFOLIO2022

Effect of wear particles and roughness on nanoscale friction

Jean-François Molinari, Tobias Brink, Enrico Milanese

Frictional contacts lead to the formation of a surface layer called the third body, consisting of wear particles and structures resulting from their agglomerates. Its behavior and properties at the nanoscale control the macroscopic tribological performance ...

2022

Solid-phase peptide synthesis on disulfide-linker resin followed by reductive release affords pure thiol-functionalized peptides

Christian Heinis, Alexander Lund Nielsen, Manuel Leonardo Merz, Ganesh Kumar Mothukuri, Zsolt Bognár, Peter Matei Frisius Pânzar

Thiol groups are suitable handles for site-selectively modifying, immobilizing or cyclizing individual peptides or entire peptide libraries. A limiting step in producing the thiol-functionalized peptides is the chromatographic purification, which is partic ...

2022

Testing mechanical performance of adhesively bonded composite joints in engineering applications: an overview

Anastasios Vassilopoulos

The development of new adhesives has allowed to expand the application of bonding into the most diverse industrial fields. This review article presents the commonly used experimental methods for the investigation of mechanical performance of adhesively bon ...

TAYLOR & FRANCIS LTD2022

Design and Development of Injectable, Tough and Intrinsically-Adhesive Hydrogels for Biomedical Applications

Peyman Karami

Despite the development of hydrogels with a wide range of mechanical properties, insufficient adhesion between these materials and biological surfaces limits their use in the biomedical applications. Most recent advancements in highly adhesive hydrogel sys ...

EPFL2021

Review of fatigue of bulk structural adhesives and thick adhesive joints

Anastasios Vassilopoulos

Fatigue of structural adhesives has been investigated through joints and a little number of works investigate bulk adhesive behaviour itself. Aerospace and automotive engineering focuses more on joint configuration studies, which are correlated with practi ...

TAYLOR & FRANCIS LTD2021

Resistance and ductility of FRP composite hybrid joints

Thomas Keller, Lulu Liu

An experimental investigation of the load-bearing behavior and ductility of FRP hybrid double-lap joints composed of both adhesively-bonded and bolted connection parts was conducted. Amongst other things, the effects of the adherends’ fiber architecture (u ...

2020

Energy dissipation in adhesive and bolted pultruded GFRP double-lap joints under cyclic loading

Thomas Keller, Sonia Yanes Armas, Ghazaleh Eslami

Fiber-reinforced polymer (FRP) structures, due to their low mass, are valuable alternatives to traditional steel or concrete structures in seismic areas. However, to resist seismic actions, FRP structures must be able to dissipate a significant amount of i ...

2020

Mechanical and Morphological Properties of Lignin-Based Thermosets

Cédric Terrier

The need for renewable alternatives for fossil-based aromatic material constituents is evident for a more sustainable society. Lignin is the largest source of naturally occurring aromatic compounds but has mainly been considered as waste material or energy ...

2020

Functional and Responsive Polymers via Controlled Radical Polymerization

Jian Wang

This Thesis is built around 4 topics, which share in common that they all take advantage of the assets of controlled radical polymerization to either (i) prepare well-defined model systems to address fundamental research questions with regard to the sensit ...

EPFL2020

Mechanical properties of a balsa wood veneer structural sandwich core material

Thomas Keller, Anastasios Vassilopoulos, Niloufar Vahedi

Balsa wood is an appropriate core material for structural sandwich applications due to its high strength- and stiffness-to-weight ratios. However, the mechanical properties vary considerably owing to the inherent scattering of natural wood materials. One a ...

2020