Skip to main content

Mediaspace scheduled maintenance: Aug 25, 2026 07:00 - 12:00 AM. During this time, videos will be temporarily unavailable. Check status updates.

Search

Show all results for

Home

Concept

Diesel exhaust fluid

Applied sciences
Environmental science
Environmental policy
Vehicle emissions control

About
Privacy
Disclaimer

Copyright © 2026 EPFL, all rights reserved

Graph Chatbot

Related publications (30)

Page 1 of 2

The simultaneous Selective Catalytic Reduction of N2O and NO over Fe-exchanged zeolites

Filippo Buttignol

Iron-exchanged zeolites are industrial heterogeneous catalysts deployed to remediate anthropogenic emissions of both nitrous oxide (N2O) and nitrogen oxides (NOx = NO + NO2). Despite the extensive scientific attention received, limited knowledge is availab ...

EPFL2024

Experimental study and interpretative modelling of the Power Exhaust in Configurations with Multiple X-Points in TCV

Sophie Danielle Angelica Gorno

Nuclear fusion presents a promising clean energy source to mitigate future energy crises, with magnetic confinement fusion well-positioned to provide a baseload scenario to power future reactors. The unmitigated power exhaust of such reactors threatens its ...

EPFL2024

In situ spectroscopic studies of the effect of water on the redox cycle of Cu ions in Cu-SSZ-13 during selective catalytic reduction of NOx

Oliver Kröcher, Davide Ferri, Rob Jeremiah G. Nuguid

The effect of water on the NH3-assisted selective catalytic reduction of NOx (NH3-SCR) has been largely neglected, despite the inevitable presence of water vapor in real emissions produced by fuel combustion. In this work, we investigated the role of water ...

Royal Society of Chemistry2022

One-pot synthesis of highly dispersed mesoporous Cu/ZrO2 catalysts for NH3-SCR

Oliver Kröcher, Davide Ferri, Rob Jeremiah G. Nuguid

Catalysts consisting of highly dispersed copper on a mesoporous ZrO2 support were synthesised via a one-pot sol-gel synthesis and were tested for the selective catalytic reduction of NOx by NH3. The copper dispersion was investigated by XRD and TEM, which ...

ELSEVIER2022

Monomeric Fe Species in Square Planar Geometry Active for Low Temperature NH3-SCR of NO

Oliver Kröcher, Davide Ferri

Monomeric Fe species in zeolites are considered to be the active sites for the low temperature activity toward ammonia-assisted selective catalytic reduction of nitrogen oxides (NH3-SCR) in exhaust gases. Herein, we report on a preparation method to synthe ...

AMER CHEMICAL SOC2022

Emission reduction by targeted transient operations in three-way catalysts for heavy-duty natural gas applications

To curb the severe effects of climate change, our society needs to radically reduce its CO2 footprint. For the heavy-duty sector, where electrification is difficult, alternative fuels can be the solution. Methane-fueled engines have lower energy-specific C ...

EPFL2022

Stability and Reactivity of a Polyoxymethylene Dimethyl Ether over Typical Catalysts for Diesel Emission Control

Oliver Kröcher, Davide Ferri

Polyoxymethylene dimethyl ethers (OME) produced from methanol are considered as potential substitutes of Diesel fuel. Emissions of formaldehyde and other components have been observed, particularly under cold-start conditions in engine test-bench experimen ...

SPRINGER/PLENUM PUBLISHERS2023

Systematic extraction of a control-oriented model from perturbative experiments and SOLPS-ITER for emission front control in TCV

Olivier Claude Martin Février, Artur Perek, Mirko Wensing

Systematic extraction of locally valid dynamic models from experiments is necessary for controller design and the validation of high fidelity models. This paper describes the extraction of a dynamic model in the form of a transfer function, giving the dyna ...

IOP Publishing Ltd2022

Poisoning of Mn-Ce/AC catalysts for low-temperature NH3-SCR of NO by K+ and its counter-ions (Cl- /NO3- /SO42- )

Oliver Kröcher, Davide Ferri, Rob Jeremiah G. Nuguid

Mn-Ce/AC catalysts for low-temperature NH3-SCR of NOx were deliberately loaded with various potassium salts (KCl, KNO3, and K2SO4) to investigate the influence of the counter-ions on the poisoning impact. Whereas K salts poisoning had only marginal impact ...

ELSEVIER2022

Investigation on the Role of Pd, Pt, Rh in Methane Abatement for Heavy Duty Applications

Oliver Kröcher, Davide Ferri, Moyu Wang

Methane abatement remains a challenge in aftertreatment systems of natural gas engines, currently under discussion in combination with synthetic methane. In this study, Pt/Rh and Pd/Rh-based three-way catalysts are investigated under various transient cond ...

MDPI2022

In Situ Infrared Spectroscopy of NOx Reduction Catalysts: A Laboratory Exercise for In-Person and Virtual Learning

Oliver Kröcher, Davide Ferri, Rob Jeremiah G. Nuguid

Infrared (IR) spectroscopy and catalysis represent two of the most practically relevant topics in chemistry, but they are normally taught in separate contexts at the undergraduate level. Although IR spectroscopy is introduced to students as a tool for orga ...

AMER CHEMICAL SOC2022

Understanding the impact of poison distribution on the performance of Diesel oxidation catalysts

Oliver Kröcher, Davide Ferri

Detailed understanding of the poisoning mechanism in Diesel oxidation catalysts (DOCs) is the key to prevent long term catalyst deterioration in vehicles. The present work studies artificial phosphorus (P) poisoning methods applied to a commercial DOC. Cor ...

ELSEVIER2021

On the relevance of P poisoning in real-world DOC aging

Oliver Kröcher, Davide Ferri

Understanding the real aging of Diesel oxidation catalysts (DOC) is key to predict their useful lifetime. This work comprises a detailed study of a commercial DOC in its unused state and after use in vehicle for 288,000 km. The activity of the samples was ...

ELSEVIER2021

Development of an 11-channel multi wavelength imaging diagnostic for divertor plasmas in MAST Upgrade

Basil Duval, Wouter Vijvers, Yanis Andrebe, Artur Perek

Divertor detachment and alternative divertor magnetic geometries are predicted to be promising approaches to handle the power exhaust of future fusion devices. In order to understand the detachment process caused by volumetric losses in alternative diverto ...

2021

Scoping the characteristics and benefits of a connected double-null configuration for power exhaust in EU-DEMO

Holger Reimerdes, Marco Wischmeier, Mirko Wensing

A double-null configuration is being considered for the EU-DEMO, due to its potential benefits for power exhaust arising from the use of two active divertors and magnetically disconnected low- and high-field sides. Using systematic parameter scans in fluid ...

Elsevier2021

High-resolution hybrid inversion of IASI ammonia columns to constrain US ammonia emissions using the CMAQ adjoint model

Athanasios Nenes

Ammonia (NH3) emissions have large impacts on air quality and nitrogen deposition, influencing human health and the well-being of sensitive ecosystems. Large uncertainties exist in the "bottom-up" NH3 emission inventories due to limited source information ...

Copernicus GmbH2021

Power exhaust by core radiation at COMPASS tokamak

Olivier Claude Martin Février, Davide Mancini

Substantial power dissipation in the edge plasma is required for the safe operation of ITER and next-step fusion reactors, otherwise unmitigated heat fluxes at the divertor plasma-facing components (PFCs) would easily exceed their material limits. Traditio ...

IOP Publishing Ltd2021

Selective Catalytic Reduction of NO with NH3 on Cu-SSZ-13: Deciphering the Low and High-temperature Rate-limiting Steps by Transient XAS Experiments

Oliver Kröcher, Davide Ferri, Rob Jeremiah G. Nuguid, Adrian Marberger, Patrick Simon Steiger

Cu-exchanged small-pore SSZ-13 catalysts have found wide use for the selective catalytic reduction (SCR) of nitrogen oxides from automotive exhaust gases. The transient working environment of the Cu-SSZ-13 catalyst during NH3-SCR requires studying the rate ...

Wiley-VCH Verlag2020

Soft pneumatic actuator-driven origami-inspired modular robotic ‘‘pneumagami’’

Jamie Paik, Matthew Aaron Robertson, Özdemir Can Kara

This article presents a new modular robotic platform for enabling reconfigurable, actively controlled, high-degree-of-freedom (high-DoF) systems with compact form factor. The robotic modules exploit the advantages of origami-inspired construction methods a ...

SAGE Publications2021

System for co2 capture from internal combustion engine

François Maréchal, Shivom Sharma

System (2) for CO2 capture from a combustion engine (1) comprising an exhaust gas flow circuit (6) having an inlet end fluidly connected to an exhaust of the combustion engine, a heat exchanger circuit (12), a primary exhaust gas heat exchanger (H1) for tr ...

2020