Mediaspace scheduled maintenance: Aug 25, 2026 07:00 - 12:00 AM. During this time, videos will be temporarily unavailable. Check status updates.

Concept

Impact (mechanics)

Related publications (25)

An Inertial Uni-Axial Interferometer-Based Accelerometer for Harsh Environments

Gerard Aliana Cervera

For high-impact devices, subsequent vibrations have as much influence on the deterioration of the mechanical structure as the impact itself. To mitigate the consequences of both impacts and resulting vibrations, it is crucial to accurately understand the p ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2022

Seismic stability of steel moment resisting frames with inelastic panel zones

Dimitrios Lignos, Andronikos Skiadopoulos

This paper summarizes preliminary findings of nonlinear simulations aiming to quantify the seismic demands of codecompliant steel MRFs with variable panel zone targeted shear distortions, 𝛾!. The probability of beam fractures is explicitly considered in th ...

Earthquake Engineering Research Institute2022

Optimization of composition and structure of cemented carbide cutting tools

Samy Adjam

WC-Co cemented carbides are composites, which combine a hard phase consisting of WC grains and a metallic ductile phase as a binder. Their excellent mechanical properties, combining high hardness, toughness and refractory properties, make them excellent ma ...

EPFL2021

Statistical Fatigue Investigation and Failure Prediction of a Healable Composite System

Véronique Michaud, Amaël Maximilien Cohades, Nathan Klaus Hostettler

Fiber reinforced polymers are massively used as an alternative to metals in structural applications. The brittle nature of their matrix, however, makes them more susceptible to crack formation and propagation resulting in costly repair operations and incre ...

2020

Cavitation induction by projectile impacting on a water jet

Mohamed Farhat

The present paper focuses on the simulation of the high-velocity impact of a projectile impacting on a water-jet, causing the onset, development and collapse of cavitation. The simulation of the fluid motion is carried out using an explicit, compressible, ...

PERGAMON-ELSEVIER SCIENCE LTD2019

Influence of the stacking sequence on the low-energy impact resistance of flax/PA11 composite

Yann Albert Gérard Lebaupin

In this paper, the low-energy impact behavior of a fully biobased composite made of bio-sourced polyamide 11 resin reinforced with flax fibers was investigated. Different composite laminates were studied in order to determine the stacking sequence effects ...

SAGE PUBLICATIONS LTD2019

Bipedal walking and push recovery with a stepping strategy based on time-projection control

Auke Ijspeert, Salman Faraji, Seyed Hamed Razavi

In this paper, we present a simple control framework for online push recovery on biped robots with dynamic stepping properties. Owing to relatively heavy legs in our humanoid robot COMAN, we use a linear model called 3LP, which is composed of three pendulu ...

SAGE PUBLICATIONS LTD2019

Is there a relationship between footstep-impact locations and measured signal characteristics?

Ian Smith, Yves Sylvain Gilles Reuland, Sai Ganesh Sarvotham Pai, Slah Drira

Building utilization can be enhanced by tracking occupants. Non-intrusive tracking of occupants using floor-vibration measurements is beneficial for many smart-building applications such as energy consumption, security enhancement, and care-giving. Also, u ...

ACM2019

Electrospun nanofibrous interleaves for improved low velocity impact resistance of glass fibre reinforced composite laminates

Véronique Michaud, Amaël Maximilien Cohades

This study analyses the damage tolerance of nanofibre interleaved composites when subjected to low velocity impact. Cross-ply glass/epoxy composite laminates are produced. Drop-weight impact and residual compressive strength measurements are performed on t ...

2018

Numerical simulation of two-dimensional crack propagation

Thomas Keller, Anastasios Vassilopoulos, Aida Cameselle Molares

A numerical investigation was carried out to simulate the experimental results previously obtained concerning two-dimensional in-plane crack propagation in laminated glass fiber-reinforced polymer (GFRP) plates. The plates were designed with an embedded ci ...

2018

Periodic cellular aluminum structures for space applications : from casting to additive manufacturing

Florian Thibaut Gallien

Mass is one of the crucial parameters for hardware that has to be placed in Earth orbit. Due to its harsh environment, a material with highest specific properties is desired to achieve space missions. The rise and development of new technologies, such as a ...

EPFL2018

Robust glass-free lightweight photovoltaic modules with improved resistance to mechanical loads and impact

Ana Cristina Oliveira Martins

In several countries, building-integrated photovoltaics (PV) solutions could contribute to the growth of total installed PV capacity. However, in some circumstances, the relative high weight (10–15 kg/m2) and lack of aesthetics of PV may constitute a barri ...

2018

Experimental Investigation of the Dynamic Performances of a Miniature Soft Magneto-Rheological Shock Absorber

Yves Perriard, Yoan René Cyrille Civet, Daniel Grivon

In the proposed work, the dynamic performances of a miniature soft Magneto-Rheological (MR) shock absorber are analyzed. The final application for which the damper has been designed and in which it will be embedded is a variable stiffness insole for patien ...

Institute of Electrical and Electronics Engineers Inc.2016

Microstructure examination of Fe-14Cr ODS ferritic steels produced through different processing routes

Nadine Baluc

Various thermo-mechanical treatments were applied to refine and homogenise grain size and improve mechanical properties of hot-isostatically pressed (HIP) 14%Cr ODS ferritic steel. The grain size was reduced, improving mechanical properties, tensile streng ...

Elsevier Science Bv2014

Impact properties of shear thickening fluid impregnated foams

Véronique Michaud, Mathieu Soutrenon

Concentrated colloidal suspensions of silica particles in polyethylene glycol exhibit a shear thickening behavior: above a critical shear rate in a confined environment, they show a steep increase of viscosity. This reversible transition from a low to a hi ...

Institute of Physics2014

Microstructure and mechanical properties of a W-2wt.%Y2O3 composite produced by sintering and hot forging

Nadine Baluc, Philippe Spätig, Robin Schäublin

A W-2Y(2)O(3) composite has been developed by powder metallurgy methods in collaboration with the Plansee Company (Austria). The microstructure of the composite was analyzed using transmission electron microscopy and electron backscatter diffraction in sca ...

2013

Numerical Simulation of the Rock SHPB Test with a Special Shape Striker Based on the Discrete Element Method

Xing Li, Yang Zou

A split Hopkinson pressure bar system with a special shape striker has been suggested as the test method by the International Society for Rock Mechanics (ISRM) to determine the dynamic characteristics of rock materials. In order to further verify this test ...

Springer Verlag2013

Multipactor saturation in parallel-plate waveguides

Michael Mattes, Francisco Edén Sorolla Rosario

The saturation stage of a multipactor discharge is considered of interest, since it can guide towards a criterion to assess the multipactor onset. The electron cloud under multipactor regime within a parallel-plate waveguide is modeled by a thin continuous ...

2012

Vibration-based characterization of impact induced delamination in composite plates using embedded FBG sensors and numerical modelling

John Botsis, Joël Cugnoni, Jeannot Frieden

Dynamic strain signals from embedded fiber Bragg grating sensors are used for experimental modal analysis in carbon fiber reinforced polymer plates. Throughout a series of impact tests, the change of eigen-frequencies due to damage is evaluated for differe ...

2011

The effect of processing conditions on the microstructure and impact behavior of melt infiltrated Al/SiCp composites

Mehdi Mazaheri

In the current research, pressureless melt infiltration (PM!) was applied to study the effect of different processing conditions on the final properties of Al/SiC composites, fabricated through the infiltration of aluminum melt into SiC particulates porous ...

Elsevier2011