Giovanni De CesareExpertise
Numerical simulation and physical modeling of hydraulic works and schemes; reservoir sedimentation and turbidity currents; reservoir sediment management; Ultrasonic Doppler flow measurement; river training work and restoration; soil bioengineering and nature based solutions; fluvial eco-morphology; rapid transients in pressurized waterways; technology transfer, commissioned studies and expert reports in applied hydraulics, hydraulic constructions and infrastructures; organization of continuous edu
François MaréchalPh D. in engineering Chemical process engineer
Researcher and lecturer in the field of computer aided process and energy systems engineering.
Lecturer in the mechanical engineering, electrical engineering and environmental sciences engineering in EPFL.
I'm responsible for the Minor in Energy of EPFL and I'm involved in 3 projects of the Competence Center in Energy and Mobility (2nd generation biofuel, Wood SOFC, and gas turbine development with CO2 mitigation) in which i'm contributing to the energy conversion system design and optimisation.
Short summary of my scientific carrer
After a graduation in chemical engineering from the University of Liège, I have obtained a Ph. D. from the University of Liège in the LASSC laboratory of Prof. Kalitventzeff (former president of the European working party on computer aided process engineering). This laboratory was one of the pioneering laboratory in the field of Computer Aided Process Engineering.
In the group of Professor Kalitventzeff, I have worked on the development and the applications of data reconciliation, process modelling and optimisation techniques in the chemical process industry, my experience ranges from nuclear power stations to chemical plants. In the LASSC, I have been responsible from the developments in the field of rational use of energy in the industry. My first research topic has been the methodological development of process integration techniques, combining the use of pinch based methods and of mathematical programming: e.g. for the design of multiperiod heat exchanger networks or Mixed integer non linear programming techniques for the optimal management of utility systems. Fronted with applications in the industry, my work then mainly concentrated on the optimal integration of utility systems considering not only the energy requirements but the cost of the energy requirements and the energy conversion systems. I developed methods for analysing and integrating the utility system, the steam networks, combustion (including waste fuel), gas turbines or other advanced energy conversion systems (cogeneration, refrigeration and heat). The techniques applied uses operation research tools like mixed integer linear programming and exergy analysis. In order to evaluate the results of the utility integration, a new graphical method for representing the integration of the utility systems has been developed. By the use of MILP techniques, the method developed for the utility integration has been extended to handled site scale problems, to incorporate environmental constraints and reduce the water usage. This method (the Effect Modelling and Optimisation method) has been successfully applied to the chemical plants industry, the pulp and paper industry and the power plant. Instead of focusing on academic problems, I mainly developed my research based on industrial applications that lead to valuable and applicable patented results. Recently the methods developed have been extended to realise the thermoeconomic optimisation of integrated systems like fuel cells. My present R&D work concerns the application of multi-objective optimisation strategies in the design of processes and integrated energy conversion systems.
Since 2001, Im working in the Industrial Energy Systems Laboratory (LENI) of Ecole Polytechnique fédérale de Lausanne (EPFL) where Im leading the R&D activities in the field of Computer Aided Analysis and Design of Industrial Energy Systems with a major focus on sustainable energy conversion system development using thermo-economic optimisation methodologies. A part from the application and the development of process integration techniques, that remains my major field of expertise, the applications concern :
Rational use of water and energy in Industrial processes and industrial production sites : projects with NESTLE, EDF, VEOLIA and Borregaard (pulp and paper).Energy conversion and process design : biofuels from waste biomass (with GASNAT, EGO and PSI), water dessalination and waste water treatment plant (VEOLIA), power plant design (ALSTOM), Energy conversion from geothermal sources (BFE). Integrated energy systems in urban areas : together with SCANE and SIG (GE) and IEA annexe 42 for micro-cogeneration systems.
I as well contributed to the definition of the 2000 Watt society and to studies concerning the emergence of green technologies on the market in the frame of the Alliance for Global Sustainability.
Azin AminiEducation:
MSc.: Structural Engineering, University of Tehran, Iran, 2002
Master Thesis: "Three dimensional analysis of crack propagation in Latiyan butress dam using smeard crack model"
BSc.: Civil Engineering, University of Tehran, Iran, 2000
Christian Ludwig2005 - today: Adjunct Professor at EPFL in the field of Solid Waste Treatment and head of the Chemical Processes and Materials research group (CPM) at Paul Scherrer Institute (PSI). Joint EPFL-PSI Professorship on Solid Waste Treatment. 2000 - today: Head, Group of Chemical Processes and Materials (CPM) at Paul Scherrer Institut (PSI). In 2009 the LEM unit was closed and the CPM group is now affiliated to the Bioenergy and Catalysis Laboratory (LBK) of the Energy and Environment Research Division (ENE). Since June 2002 permanent position ("tenure"). 1997 - 1999: Senior Scientist. Paul Scherrer Institut (PSI), General Energy Research Department, Element Cycles Section. 1995 - 1997: Research Fellow. Swiss Federal Institute for Environmental Science and Technology (EAWAG), Department of Resource and Waste Management. 1993 - 1995: Post-doc Fellow. University of California Davis, Department of Land, Air, and Water Resources (LAWR). 1990 - 1993: PhD Student. University of Berne, Department of Inorganic, Analytical, and Physical Chemistry. 1989 - 1990: Master Student. University of Berne, Department of Inorganic, Analytical, and Physical Chemistry.
Thomas La GrangeExpertise
Electron Microscopy, Aberration Correct Scanning Transmission Electron Microscopy, Electron Diffraction, Ultrafast Transmission Electron Microscopy, Electron Energy Loss Spectroscopy, Energy Dispersive Spectroscopy, Materials Science, High-speed deformation, Dislocation Dynamics, Skyrmionics, Martensitic Phase Transformation Theory, Solidification
Expertise
Electron Microscopy, Aberration Correct Scanning Transmission Electron Microscopy, Electron Diffraction, Ultrafast Transmission Electron Micro
Pierre-Etienne BourbanBackground 1990 Ingénieur en science des matériaux 1993 PhD in materials science Activities 1993-1994 Research at the Center for Composite Materials, University of Delaware, USA (ccm.udel.edu), SNSF grant Since 1994 Research and teaching at EPFL, Composites, (LTC, LPAC) 1995-1999 Coordination Swiss Priority Program on Materials research: 2.2: Composites Since 1998 Biocomposites 2004-2009 Direction of the EPFL Transdisciplinary programme in Sport and Rehabilitation 2005-2008 Member of the EPFL Vice-Presidency for Innovation and Valorisation and direction a.i.EPFL-LTC Since 2016 Direction Discovery Learning Labs Materials/Bioengineering and Engineering
César PulgarinProf. C. Pulgarin is Chemist from Lausanne University, Master in environmental chemistry from Geneva University, Ph D in synthesis bio-inspired of natural substances from Neuchâtel University. During his education he carried out several industrial trainings.
Since March 1989, he has been working at the EPFL where he is leader of the Advanced Oxidation Processes Group (GPAO) active in the development chemical, photochemical, electrochemical, ultrasonic processes, their coupling between them and with biological systems to degrade chemical and microbiological pollutants in water and air. He has an H index of 40 and he is the world most cited author in 1) TiO2 photo-assisted bacterial inactivation in water and 2) Coupling of photochemical and biological processes for pollutant degradation. He has been involved in ten African, South American and European international research projects. He has been Swiss representative in COST program 540.
Andreas MortensenAndreas Mortensen is currently Professor and Director of the Institute of Materials at the Swiss Federal Institute of Technology in Lausanne (EPFL), where he heads the Laboratory for Mechanical Metallurgy. He joined the faculty of EPFL 1997 after ten years, from 1986 to 1996, as a member of the faculty of the Department of Materials Science and Engineering at the Massachusetts Institute of Technology, where he held the successive titles of ALCOA Assistant Professor, Associate Professor, and Professor. His research is focussed on the processing, microstructural development and mechanical behavior of advanced metallic materials with particular focus on metal matrix composites and metal foams, on infiltration processing and capillarity, and on damage and fracture in metallic materials. He is author or co-author of two monographs, around one hundred and eighty scientific or technical publications and twelve patents. Born in San Francisco in 1957, of dual (Danish and US) nationality, Andreas Mortensen graduated in 1980 from the Ecole Nationale Supérieure des Mines de Paris with a Diplôme dIngénieur Civil, and earned his Ph.D. in the Department of Materials Science and Engineering at MIT in 1986. Besides his academic employment, he was a postdoctoral researcher at Nippon Steel during part of 1986, and was invited professor at the Ecole des Mines in Paris during the academic year 1995 to 1996. He is a member of the editorial committee of International Materials Reviews and has co-edited four books. He is a Fellow of ASM, a recipient of the Howe Medal and the Grossman Award of the American Society of Metals, was awarded the Péchiney Prize by the French Academy of Sciences and the Res Metallica Chair from the Katholieke Universiteit Leuven, received three EPFL teaching awards, is one of ISIs Highly Cited authors for Materials Science since 2002 and was awarded an ERC advanced grant in 2012.
Martine LapriseTeaching & PhD Courses Vers des villes bioclimatiques ? AR-688
Sergi Aguacil MorenoExpertise
- Architecture, energy, building physics and environment- Integration of innovation in buildings | Smart Living Lab- Managing complex projects- Linking research and practice | Research infrastructures- Integrating sustainability into architectural projects- Life cycle assessment and environmental impact studies- Integration of photovoltaic energy in buildings | Renovation and new construction projects | ActiveInterfaces- Multi-criteria studies and assessments
Education PhD in Architecture | A
Véronique MichaudBackground:
1994 Habilitation à diriger des recherches ( INPG, France)
1991 PhD in Materials Engineering ( MIT, USA)
1987 Ingénieur Civil des Mines ( Ecole des Mines de Paris, France)
Activities:
Since January 2018: Associate Dean of Engineering, in charge of Education
June 2012-Dec.2017: Head of the Materials Science and Engineering Section
Since April 2017: Associate Professor at EPFL
2009-2017 : Professeur Titulaire at EPFL
1997-2009: Researcher at EPFL
1994-1997 : Chef de Travaux au laboratoire MSS-MAT, Ecole Centrale Paris (France)
1991-1994 : Post-doctoral research associate, MIT (USA)
Author of about 300 publications of which 140 in peer-reviewed journals
