Vladimir ManucharyanTeaching & PhD PhD Students Chulwoo Ahn, Marco Nicolas Mueller, Taketo Imaizumi, Andrea Lizzit, Andrea Duina, Nikola Dimitrov Dimitrov Courses Microwave engineering in physics QUANT-410 This course aims at teaching basic notions and tricks of microwave engineering to students with only an elementary knowledge of applied electromagnetism. Emphasis is made on topics that often arise in modern physics experiments, including quantum science and technology research. Quantum mechanics for non-
Simon BossoneyTeaching & PhD Courses Algèbre linéaire et géométrie (pour MAN) PREPA-032(a) We present the fundamental notions of linear algebra in the geometric context where they emerged. We will therefore emphasize the dimensions 2 and 3, and insist on the visualisation of classical objects and operations in the plane and in the 3D space. Analysis I (for CMS) PREPA-003(a) This first semester class is an introduction to the basis of differential calculus. Analysis II (for CMS)
Roger SauserTeaching & PhD Courses Descriptive geometry (for MAN) PREPA-091 The course addresses the techniques of parallel projections (axonometry and Monge representation) and central projection (perspective) in order to develop the student's ability to describe and study objects and spatial situations by illustrating them with technical drawings. ICS (for CMS) PREPA-026 The present course presents numerical methods for solving nonlinear equations, computing definite integrals and sol
Michaël UnserExpertise
Image Processing, Medical Imaging, Biological Imaging, Wavelets, Splines, Multiresolution
Michael Unser is Full Professor with EPFL’s school of Engineering and the academic director of EPFL's Center for Imaging, Lausanne, Switzerland. His primary areas of investigation are signal processing, biomedical imaging and applied functional analysis. He is internationally recognized for his research contributions to sampling theory, wavelets, the use of splines for image processing, stochastic processes,
Emma Elizabeth TolleyI studied the universe at the smallest scales at the Large Hadron Collider, now we're getting ready to study it at the largest scales with the Square Kilometer Array. My research focuses on developing high-performance computing and new data science techniques to image and analyse the radio sky.
Teaching & PhD PhD Students Markus Johan Bredberg, Ashutosh Kumar Mishra Past EPFL PhD Students as codirector Shreyam Parth Krishna Courses General physics : mechanics (english flipped classroom) PHYS-101
Roger HerschRoger D. Hersch is professor of Computer Science and head of the Peripheral Systems Laboratory at EPFL. He received his engineering degree from ETHZ in 1975, worked in industry from 1975 to 1980, and obtained his PhD degree from EPFL in 1985. He directed the widely known
Visible Human Web Server project
, which offers a number of services for the visualization of human anatomy.
His current research focuses on color reproduction, spectral color prediction models, moiré imaging, and visual document security. Recent achievements include the PhotoProtect technology, which incorporates text as chromatic differences in order to protect identity photographs (Swiss driving license), microstructure imaging, which is used by railways companies (SNCF, RENFE) and festival organizers (Paleo) to print tickets at home and the band moire imaging technology for the protection of security documents.
Pawel DuchExpertise
My present research focuses on the intersection between probability theory, PDE theory and Euclidean quantum field theory. I am especially interested in problems involving singular stochastic partial differential equations and renormalization. I have also a background in mathematical aspects of perturbative and axiomatic quantum field theory as well as general relativity.
I am a postdoctoral researcher in the group of Martin Hairer. Previously, I was a postdoc at Adam Mickiewicz University in Pozn
Philippe MüllhauptExpertise
Nonlinear Control (Geometry and Algebra)Classical DynamicsRoboticsStatistics
Mission
Provide rigorous technical and scientific training in nonlinear control, classical mechanics, and statistical theory
Current Work
Research and teaching in the fields of control theory, statistics, dynamical systems, and general mechanics.
Philippe Mullhaupt received his Diplôme d Education Ing�nieur | Electricit� 1993 – 1993 EPFL DEA | Automatique et Traitement du Signal 199
Jérôme ChenalExpertise
Urban DesignUrban PlanningUrban ManagementPublic SpaceHousingDevelopment StudiesVisual Anthropology
Mission
Director of CEAT Director of Excellence in Africa Center Affiliate professor at UM6P
Teaching & PhD Past EPFL PhD Students Stéphanie Hasler, Rémi Jaligot, Armel Firmin Kemajou Mbianda, Martí Bosch Padrós, Andrea Salmi, Vitor Pessoa Colombo, Akuto Akpedze Konou, Rim Mrani Past EPFL PhD Students as codirector Marc Antoine Messer, Alexandre Rigal Courses Urban planning in the South PE
Giordano FaviExpertise
Research: Non associative Algebra, Category Theory, Triangulated Category Theory, Balmer-Witt Theory, Quadratic Forms in Characteristic 2, Galois Theory, Essential dimension, Tensor Triangular GeometryTeaching: Algebra (Associative, Linear, Commutative or not), Differential Calculus , Algebraic Geometry/Topology, etc.
Current work
Teaching: My current work at EPFL is half time dedicated to teaching mathematics for 1st year students. It is very important to give satisfactory introductory courses
Georgios MoschidisTeaching & PhD PhD Students Abraham Gabriel Dorsaz Courses Analysis IV (for EL, GM, MX) MATH-207(c) This course serves as an introduction to the theory of complex analysis, Fourier series and Fourier transforms, the Laplace transform, with applications to the theory of ordinary and partial differential equations. These tools play an integral role in most branches of science and engineering. Differential geometry I - curves and surfaces MATH-213 This course serves as an intr
Dimitrios LignosProf. Lignos joined the École Polytechnique Féderale de Lausanne (EPFL) in 2016 from McGill University in Canada where he was a tenured Associate Professor and a William Dawson Scholar for Infrastructure Resilience. He holds a diploma (National Technical University of Athens, NTUA, 2003), M.S. (Stanford University, 2004) and Ph.D. (Stanford University, 2008). In addition, he was a post-doctoral scientist at Stanford University (2009) and in Kyoto University (2010). Prof. Lignos teaches graduate and undergraduate courses in seismic design, nonlinear behaviour of steel and composite structures as well as supplemental damping systems, Structural Stability, Nonlinear Analysis and Performance-based Earthquake Engineering. His awards for teaching, research and service in Civil Engineering include the 2011 Outstanding Teaching Award (Faculty of Engineering, McGill University), as well as the Outstanding reviewer (2012, 2013) award from ASCE, the 2013 State-of-the-Art in Civil Engineering Award by ASCE and the 2014 Christophe Pierre Award for Research Excellence - Early Career. Just recently, he received the 2019 Walter L. Huber Civil Engineering Research Prize from ASCE for significant contributions in developing state of the art methods to simulate extreme limit states in steel structures.Prof. Lignos is a member of ASCE and the Earthquake Engineering Research Institute. He acts as an Associate Editor for Metal Structures and Seismic Effects of the ASCE Journal of Structural Engineering. He joined the Editorial Board of Earthquake Spectra and Earthquake Engineering and Structural Dynamics International journals. He serves as an acting member of the CEN/TC 250/SC 8/WG 2 and has been selected as a member of the Project Team (PT2) for the Eurocode 8-Part 1 Current Revisions for Steel and Composite Structures. He is also a member of the Canadian Standards Association (CSA) S16 technical committee for Steel Structures. Prof. Lignos is involved as a NEHRP consultant in numerous research-to-practice projects related to the behaviour and nonlinear modelling and analysis of structures applicable to the engineering practice through the Applied Technology Council (ATC). Detailed Curriculum Vitae (last update September 2018)
Guido HaefeliTeaching & PhD PhD Students Federico Ronchetti, Gauri Napoletano Past EPFL PhD Students as codirector Axel Kuonen, Olivier Göran Girard, Carina Trippl Courses Particle detection PHYS-440 The course will cover the physics of particle detectors. It will introduce the experimental techniques used in nuclear and particle physics. The lecture includes the interaction of particles with matter, scintillators, gas detectors, silicon detectors, detectors for particle ID and photo-detectors.
Olivier SchneiderAfter his thesis defense in particle physics in 1989 at University of Lausanne, Olivier Schneider joins LBL, the Lawrence Berkeley Laboratory (California), to work on the CDF experiment at the Tevatron in Fermilab (Illinois), first as a research fellow supported by the Swiss National Science Foundation, and later as a post-doc at LBL. He participates in the construction and commissioning of the first silicon vertex detector to operate successfully at a hadron collider; this detector enabled the discovery of the sixth quark, named "top". Since 1994, he comes back to Europe and participates in the ALEPH experiment at CERN's Large Electron-Positron Collider, as CERN fellow and then as CERN scientific staff. He specializes in heavy flavour physics. In 1998, he becomes associate professor at University of Lausanne, then extraordinary professor at the Swiss Institute of Technology Lausanne (EPFL) in 2003, and finally full professor at EPFL in 2010. Having worked since 1997 on the preparation of the LHCb experiment at CERN's Large Hadron Collider, which started operation in 2009, he is now analyzing the first data. He also contributes since 2001 to the exploitation of the data recorded at the Belle experiment (KEK laboratory, Tsukuba, Japan). These two experiments study mainly the decays of hadrons containing a b quark, as well CP violation, i.e. the non-invariance under the symmetry between matter and antimatter.
Olivier MartinOlivier J.F. Martin received the M.Sc. and Ph.D. degrees in physics in 1989 and 1994, respectively, from the Swiss Federal Institute of Technology, Lausanne (EPFL), Switzerland. In 1989, he joined IBM Zurich Research Laboratory, where he investigated thermal and optical properties of semiconductor laser diodes. Between 1994 and 1997 he was a research staff member at the Swiss Federal Institute of Technology, Zurich (ETHZ). In 1997 he received a Lecturer fellowship from the Swiss National Science Foundation (SNSF). During the period 1996-1999, he spent a year and a half in the U.S.A., as invited scientist at the University of California in San Diego (UCSD). In 2001 he received a Professorship grant from the SNSF and became Professor of Nano-Optics at the ETHZ. In 2003, he was appointed Professor of Nanophotonics and Optical Signal Processing at the Swiss Federal Institute of Technology, Lausanne (EPFL), where he is currently head of the Nanophotonics and Metrology Laboratory and Director of the Microengineering Section.
François MaréchalPh D. in engineering Chemical process engineer
Researcher and lecturer in the field of computer aided process and energy systems engineering.
Lecturer in the mechanical engineering, electrical engineering and environmental sciences engineering in EPFL.
I'm responsible for the Minor in Energy of EPFL and I'm involved in 3 projects of the Competence Center in Energy and Mobility (2nd generation biofuel, Wood SOFC, and gas turbine development with CO2 mitigation) in which i'm contributing to the energy conversion system design and optimisation.
Short summary of my scientific carrer
After a graduation in chemical engineering from the University of Liège, I have obtained a Ph. D. from the University of Liège in the LASSC laboratory of Prof. Kalitventzeff (former president of the European working party on computer aided process engineering). This laboratory was one of the pioneering laboratory in the field of Computer Aided Process Engineering.
In the group of Professor Kalitventzeff, I have worked on the development and the applications of data reconciliation, process modelling and optimisation techniques in the chemical process industry, my experience ranges from nuclear power stations to chemical plants. In the LASSC, I have been responsible from the developments in the field of rational use of energy in the industry. My first research topic has been the methodological development of process integration techniques, combining the use of pinch based methods and of mathematical programming: e.g. for the design of multiperiod heat exchanger networks or Mixed integer non linear programming techniques for the optimal management of utility systems. Fronted with applications in the industry, my work then mainly concentrated on the optimal integration of utility systems considering not only the energy requirements but the cost of the energy requirements and the energy conversion systems. I developed methods for analysing and integrating the utility system, the steam networks, combustion (including waste fuel), gas turbines or other advanced energy conversion systems (cogeneration, refrigeration and heat). The techniques applied uses operation research tools like mixed integer linear programming and exergy analysis. In order to evaluate the results of the utility integration, a new graphical method for representing the integration of the utility systems has been developed. By the use of MILP techniques, the method developed for the utility integration has been extended to handled site scale problems, to incorporate environmental constraints and reduce the water usage. This method (the Effect Modelling and Optimisation method) has been successfully applied to the chemical plants industry, the pulp and paper industry and the power plant. Instead of focusing on academic problems, I mainly developed my research based on industrial applications that lead to valuable and applicable patented results. Recently the methods developed have been extended to realise the thermoeconomic optimisation of integrated systems like fuel cells. My present R&D work concerns the application of multi-objective optimisation strategies in the design of processes and integrated energy conversion systems.
Since 2001, Im working in the Industrial Energy Systems Laboratory (LENI) of Ecole Polytechnique fédérale de Lausanne (EPFL) where Im leading the R&D activities in the field of Computer Aided Analysis and Design of Industrial Energy Systems with a major focus on sustainable energy conversion system development using thermo-economic optimisation methodologies. A part from the application and the development of process integration techniques, that remains my major field of expertise, the applications concern :
Rational use of water and energy in Industrial processes and industrial production sites : projects with NESTLE, EDF, VEOLIA and Borregaard (pulp and paper).Energy conversion and process design : biofuels from waste biomass (with GASNAT, EGO and PSI), water dessalination and waste water treatment plant (VEOLIA), power plant design (ALSTOM), Energy conversion from geothermal sources (BFE). Integrated energy systems in urban areas : together with SCANE and SIG (GE) and IEA annexe 42 for micro-cogeneration systems.
I as well contributed to the definition of the 2000 Watt society and to studies concerning the emergence of green technologies on the market in the frame of the Alliance for Global Sustainability.
