Mediaspace scheduled maintenance: Aug 25, 2026 07:00 - 12:00 AM. During this time, videos will be temporarily unavailable. Check status updates.

Concept

Design for X

Related publications (28)

Experimental characterization and stochastic models for time-dependent rupture of thin-ply composite laminates

Kanthasamy Ubamanyu

Thin-laminate composites with thicknesses below 200 mu m hold significant promise for future, larger, and lighter deployable structures. This paper presents a study of the time-dependent failure behavior of thin carbon-fiber laminates under bending, focusi ...

2024

A Conceptual Framework for Integrating Conversational Agents in Digital Education

Juan Carlos Farah

The presence of conversational agents (or chatbots) in educational contexts has been steadily increasing over the past few years. Recent surveys have shown widespread interest in the use of chatbots in education, both for research and practice. Although th ...

EPFL2023

Dielectrophoretic Traps for Efficient Bead and Cell Trapping and Formation of Aggregates of Controlled Size and Composition

Philippe Renaud, Arnaud Bertsch, Clémentine Sophie Sarah Lipp

We present a microfluidic dielectrophoretic-actuated system designed to trap chosen single-cell and form controlled cell aggregates. A novel method is proposed to characterize the efficiency of the dielectrophoretic trapping, considering the flow speed but ...

2022

Bias free multiobjective active learning for materials design and discovery

Berend Smit, Kevin Maik Jablonka, Shi-Lin Wang

The design rules for materials are clear for applications with a single objective. For most applications, however, there are often multiple, sometimes competing objectives where there is no single best material and the design rules change to finding the se ...

Nature Research2021

A generic methodology and a digital twin for zero defect manufacturing (ZDM) performance mapping towards design for ZDM

Foivos Psarommatis Giannakopoulos

Over recent years, the manufacturing industry has seen constant growth and change. From one side, it has been affected by the fourth industrial revolution (Industry 4.0). From the other side, it has had to enhance its ability to meet higher customer expect ...

2021

On the Application of Small-Scale Turbines in Industrial Steam Networks

François Maréchal, Jürg Alexander Schiffmann, Ivan Daniel Kantor, Ansgar Weickgenannt

This study investigates the technical and economic feasibility of replacing throttling valves with smale-scale, oil-free turbomachinery in industrial steam networks. This is done from the perspective of the turbomachine, which has to be integrated into a n ...

2021

Unstable tilting motion of flexibly supported gas bearing bushings

Jürg Alexander Schiffmann, Philipp Kaspar Bättig

This paper presents measurements of the motion amplitudes from flexibly supported Herringbone Grooved Journal Bearing bushings. Measurements taken in four locations on the flexibly supported bearing bushing enable the distinction between the radial and the ...

2022

Design guidelines for Al-12%Si latent heat storage encapsulations to optimize performance and mitigate degradation

Sophia Haussener, Selmar Rudolf Binder

We provide detailed insight into the growth kinetics of intermetallic layers formed at the interface of molten Al-12%Si with cylindrical encapsulations of 316L stainless steel. This knowledge is relevant for the design and operation of high-temperature lat ...

ELSEVIER2020

Influence of Large Relative Tip Clearances for a Micro Radial Fan and Design Guidelines for Increased Efficiency

Jan Van Herle, Jürg Alexander Schiffmann, Patrick Hubert Wagner

The blade tip clearance loss was studied experimentally and numerically for a micro radial fan with a tip diameter of 19:2mm. Its relative blade tip clearance, i.e., the clearance dividedby the blade height of 1:82mm, was adjusted with different shims. The ...

2021

Toward ultra-low power design methodology for frequency generation in the IoT design space

Mathieu Yves Hervé Coustans

Today, the semiconductor industry is feeding our digital world with more and more data coming from compact embedded electronics that are monitoring our environment and feeding analytics for action. Interaction with our digital world is mostly achieved thro ...

EPFL2019

Classic Electrically Small Antennas Versus in/On-Body Antennas: Similarities and Differences

Anja Skrivervik

Electrically small antennas (ESAs) have been discussed since the early radio days, when all antennas were small compared to the wavelength. The boom of mobile phones triggered a second wave of intense research activity on these devices, which continues tod ...

The European Associationa onAntennas and Propagation (EurAAP)2019

ROS-Health: An Open-Source Framework for Neurorobotics

José del Rocio Millán Ruiz, Luca Tonin

This paper aims at providing a preliminary description of ROS-Health, a novel framework for neurorobotics based on the middleware Robot Operating System (ROS). The increased interest in the neurorobotics field and the proliferation of several (neuro) physi ...

IEEE2018

Design rules for Unipolar Unicolor Coded Brillouin Optical Time Domain Analysis

Luc Thévenaz, Marcelo Alfonso Soto Hernandez, Zhisheng Yang, Simon Adrien Zaslawski

The performance of unipolar unicolor coded Brillouin optical time-domain analysis (BOTDA) is thoroughly studied, providing quantitative guidelines to design a distortion-free coded BOTDA system operating at maximum signal-to-noise ratio. ...

Optical Society of America2018

High density fiber postitioner system for massive spectroscopic surveys

Jean-Paul Richard Kneib, Hannes Bleuler, Mohamed Bouri, Luzius Gregor Kronig, Philipp Hörler

We describe here a novel design of a fast high-density robotized fiber positioner system for massive spectroscopic surveys. The fiber positioners are compact, robust, and they can be coordinated, allowing for a high spatial density. Furthermore, the high a ...

OXFORD UNIV PRESS2018

Design rules for customizable optical materials based on nanocomposites

Toralf Scharf

Nanocomposites with tailored optical properties can provide a new degree of freedom for optical design. However, despite their potential these materials remain unused in bulk optical applications. Here we investigate the conditions under which they can be ...

OPTICAL SOC AMER2018

Robotic Fiber Positioning Systems for Massive Spectroscopic Surveys: Mechanical Design Guidelines and Technological Opportunities

Philipp Hörler

The technology of fiber positioning robots has been evolving in the recent years and currently lacks of a comprehensive view. This thesis aims at filling this gap. Fiber positioning robots are analyzed under different aspects: a theoretical framework, desi ...

EPFL2018

Design guidelines for remote laser welding in automotive assembly lines

Jumyung Um, Ian Anthony Stroud

Remote laser welding which has benefits for both productivity and energy saving is receiving increased attention for automotive assembly lines. Introducing this innovative equipment requires a redesign process for assembly elements, for example to substitu ...

Springer London Ltd2017

Multi Level Monte Carlo Methods for Uncertainty Quantification and Robust Design Optimization in Aerodynamics

Michele Pisaroni

The vast majority of problems that arise in aircraft production and operation require decisions to be made in the presence of uncertainty. An effective and accurate quantification and control of the level of uncertainty introduced in the design phase and d ...

EPFL2017

Lateral Torsional Buckling of steel bridge girders

Jean-Paul Lebet, Raphaël Thiébaud

The Lateral Torsional Buckling (L.T.B.) design of beams in buildings has received considerable attention over the last decades, and relatively similar improved design rules are now implemented in major design standards. On the contrary, it may be shown tha ...

Structural Stability Research Council2016

Nanoscale MOSFET Modeling for the Design of Low-power Analog and RF Circuits

Christian Enz, Alessandro Pezzotta

This paper presents the simplified charge-based EKV MOSFET model and shows that it can be used for advanced CMOS processes despite its very few parameters. The concept of inversion coefficient is then presented as an essential design parameter that spans t ...

IEEE2016