Mohammad Khaja NazeeruddinDr. Md. K. Nazeeruddin received M.Sc. and Ph. D. in inorganic chemistry from Osmania University, Hyderabad, India. He joined as a Lecturer in Deccan College of Engineering and Technology, Osmania University in 1986, and subsequently, moved to Central Salt and Marine Chemicals Research Institute, Bhavnagar, as a Research Associate. He was awarded the Government of Indias fellowship in 1987 for study abroad. In 2014, EPFL awarded him the title of Professor. His current research at EPFL focuses on Dye Sensitized Solar Cells, Perovskite Solar Cells, CO2 reduction, Hydrogen production, and Light-emitting diodes. He has published more than 509 peer-reviewed papers, ten book chapters, and he is inventor/co-inventor of over 50 patents. The high impact of his work has been recognized by invitations to speak at over 130 international conferences, and has been nominated to the OLLA International Scientific Advisory Board. He appeared in the ISI listing of most cited chemists, and has more than 49'000 citations with an h-index of 105. He is teaching "Functional Materials" course at EPFL, and Korea University; directing, and managing several industrial, national, and European Union projects. He was awarded EPFL Excellence prize in 1998 and 2006, Brazilian FAPESP Fellowship in 1999, Japanese Government Science & Technology Agency Fellowship, in 1998, Government of India National Fellowship in 1987-1988. Recently he has been appointed as World Class University (WCU) professor by the Korea University, Jochiwon, Korea (http://dses.korea.ac.kr/eng/sub01_06_2.htm), Adjunct Professor by the King Abdulaziz University, Jeddah, Saudi Arabia and Eminent Professor in Brunei. Xile HuXile Hu was born in 1978 in Putian, southeastern China. He entered the Peking University in Beijing in 1996. Besides learning too little chemistry, his biggest regret in the college was not able to correct his southern accent in Mandarin. After graduated from PKU, he went to the United States and began his doctoral studies at the University of California, San Diego. In December 2004, he finished with a Ph.D. in chemistry and some fond memories of the beautiful city of San Diego. He then moved to the Los Angeles area and become a postdoctoral scholar at the California Institute of Technology. There he enjoyed numerous stimulating scientific (and other) discussions with friends and colleagues. He also made plenty of friends outside the campus and was a frequent in many local Chinese restaurants. In 2007, after two pleasant visits to Switzerland, he decided to move across the continent one more time and join the faculty of the École Polytechnique Fédérale de Lausanne (EPFL). He now directs the Laboratory of Inorganic Synthesis and Catalysis and is interested in developing chemistry for synthesis, energy and sustainability.
Mario PaoloneMario Paolone received the M.Sc. (with honors) and the Ph.D. degree in electrical engineering from the University of Bologna, Italy, in 1998 and 2002, respectively. In 2005, he was appointed assistant professor in power systems at the University of Bologna where he was with the Power Systems laboratory until 2011. In 2010, he received the Associate Professor eligibility from the Politecnico di Milano, Italy. Since 2011 he joined the Swiss Federal Institute of Technology, Lausanne, Switzerland, where he is now Full Professor, Chair of the Distributed Electrical Systems laboratory and Head of the Swiss Competence Center for Energy Research (SCCER) FURIES (Future Swiss Electrical infrastructure). He was co-chairperson of the technical programme committees of the 9th edition of the International Conference of Power Systems Transients (IPST 2009) and of the 2016 Power Systems Computation Conference (PSCC 2016). He was chair of the technical programme committee of the 2018 Power Systems Computation Conference (PSCC 2018). In 2013, he was the recipient of the IEEE EMC Society Technical Achievement Award. He was co-author of several papers that received the following awards: best IEEE Transactions on EMC paper award for the year 2017, in 2014 best paper award at the 13th International Conference on Probabilistic Methods Applied to Power Systems, Durham, UK, in 2013 Basil Papadias best paper award at the 2013 IEEE PowerTech, Grenoble, France, in 2008 best paper award at the International Universities Power Engineering Conference (UPEC). He was the founder Editor-in-Chief of the Elsevier journal Sustainable Energy, Grids and Networks and was Associate Editor of the IEEE Transactions on Industrial Informatics. His research interests are in power systems with particular reference to real-time monitoring and operation, power system protections, power systems dynamics and power system transients. Mario Paolone is author or coauthor of over 300 scientific papers published in reviewed journals and international conferences.
Dominique BonvinDominique Bonvin is Professor and Director of the Automatic Control Laboratory of EPFL. He received his Diploma in Chemical Engineering from ETH Zürich, and his Ph.D. degree from the University of California, Santa Barbara. He worked in the field of process control for the Sandoz Corporation in Basel and with the Systems Engineering Group of ETH Zürich. He joined the EPFL in 1989, where his current research interests include modeling, control and optimization of dynamic systems. He served as Director of the Automatic Control Laboratory for the periods 1993-97, 2003-2007 and again since 2012, Head of the Mechanical Engineering Department in 1995-97 and Dean of Bachelor and Master Studies at EPFL for the period 2004-2011.
Xun LiaoI'm a LCA sustainability consultant, focusing on R&D and applications of integrating LCA with traditional corporate ESG reporting and management, as well as bridging the gap between LCA, Supply chain management (SCM) , risk assessment and business sustainability investment and decision-making.
As a Marie Curie PhD fellow in EPFL, I'm working on sustainability (social/economic/environmental) assessment, design and optimization of different biorefinery concepts.
As a sustainability consultant, I'm researching and developing methodologies and tools for the following field:
- Corporate ESG and sustainability investment
-Assess and manage GHG emissions, Water and land, renewable energy, human health, Biodiversity, social issues
-Materiality, CDP report, GRI and other reporting initiatives
-Competitive advantage through investment in sustainability (ESG) programs
- Strategy, Supply chain management and risk assessment within the framework of Life Cycle thinking
-
Commodity, Supply chain, Operational risks due to regulatory, physical factors.
-
Life cycle costing
-
Risk assessment
-
Integration of assessment, optimization and management of supply chain, downstream and corporate operational data
I have many years experience in life cycle assessment, with expertise in water database modeling and assessment, energy analysis and life cycle inventory modeling. Worked with various industries, including energy, agri-food, packaging, tire, oil & gas, semi-conductor, pet food, pharmaceutical and textile sectors, for clients such as World Business Council for Sustainable Development, Mondelez, Kraft Foods, Nestlé, Michelin, Bayer, Pfizer, Huntsman, GE, Intel, and many others. Jan Van HerleBorn in Antwerp, Belgium. In Switzerland since 1983. Became Swiss citizen in 2004 out of conviction of principles of democracy and bottom-up participation. No double nationality. Village Council Member for 2 five-year mandates in 2006-2016.
1987 : Chemist from Basel University (CH).
1988 : Post-graduate IT diploma from Basel Engineering School.
1989 : Industry internship ABB Baden (CH).
1990-1993 : PhD Thesis EPFL, on Solid Oxide Fuel Cell cathode reaction mechanisms.
1994-1995 : Japanese Postdoctoral Fellowship in Tsukuba, Japan, on ceramic powders.
1995-2000 : Researcher at EPFL, Dpt. Chemistry : project responsible in PPM2 (materials), FP4-BriteEuram, NEDO (Japan), Swiss Gas Union (CH, oxygen membranes).
1998-2000 : Masters in Energy Technology, EPFL.
2000 : Cofounder of HTceramix SA (EPFL spin-off), now based in Yverdon (14 employees). Taken over by SOLIDpower in 2007, now 250 employees with 70 MCHF raised.
2000 : 1st Assistant and lecturer at LENI (STI-IGM) : fuel cell group responsible, projects on biogas (Federal Energy Office), woodgas (CCEM), fuel cell stacking (CTI, FP6, FNS), ceramic separation membranes (COST, FNS), microtubes (STI Seed), stability/lifetime/reliability in fuel cells (Electricité de France, swisselectric research). Currently 4 Ph D theses ongoing, 14 theses concluded, of which 5 colateral with SB and IMX. M.E.R. since Nov 2008.
Total funding raised so far >18 MCHF (50% as main applicant; 30% outside CH; 20% industry).
Scientific output : >135 peer-reviewed publications, >120 conference papers, 40 invited presentations (8 keynotes), >70 granted proposals.
Fluent in 5 languages (Dutch, French, German ( Swiss-german), English, Spanish).
François MaréchalPh D. in engineering Chemical process engineer
Researcher and lecturer in the field of computer aided process and energy systems engineering.
Lecturer in the mechanical engineering, electrical engineering and environmental sciences engineering in EPFL.
I'm responsible for the Minor in Energy of EPFL and I'm involved in 3 projects of the Competence Center in Energy and Mobility (2nd generation biofuel, Wood SOFC, and gas turbine development with CO2 mitigation) in which i'm contributing to the energy conversion system design and optimisation.
Short summary of my scientific carrer
After a graduation in chemical engineering from the University of Liège, I have obtained a Ph. D. from the University of Liège in the LASSC laboratory of Prof. Kalitventzeff (former president of the European working party on computer aided process engineering). This laboratory was one of the pioneering laboratory in the field of Computer Aided Process Engineering.
In the group of Professor Kalitventzeff, I have worked on the development and the applications of data reconciliation, process modelling and optimisation techniques in the chemical process industry, my experience ranges from nuclear power stations to chemical plants. In the LASSC, I have been responsible from the developments in the field of rational use of energy in the industry. My first research topic has been the methodological development of process integration techniques, combining the use of pinch based methods and of mathematical programming: e.g. for the design of multiperiod heat exchanger networks or Mixed integer non linear programming techniques for the optimal management of utility systems. Fronted with applications in the industry, my work then mainly concentrated on the optimal integration of utility systems considering not only the energy requirements but the cost of the energy requirements and the energy conversion systems. I developed methods for analysing and integrating the utility system, the steam networks, combustion (including waste fuel), gas turbines or other advanced energy conversion systems (cogeneration, refrigeration and heat). The techniques applied uses operation research tools like mixed integer linear programming and exergy analysis. In order to evaluate the results of the utility integration, a new graphical method for representing the integration of the utility systems has been developed. By the use of MILP techniques, the method developed for the utility integration has been extended to handled site scale problems, to incorporate environmental constraints and reduce the water usage. This method (the Effect Modelling and Optimisation method) has been successfully applied to the chemical plants industry, the pulp and paper industry and the power plant. Instead of focusing on academic problems, I mainly developed my research based on industrial applications that lead to valuable and applicable patented results. Recently the methods developed have been extended to realise the thermoeconomic optimisation of integrated systems like fuel cells. My present R&D work concerns the application of multi-objective optimisation strategies in the design of processes and integrated energy conversion systems.
Since 2001, Im working in the Industrial Energy Systems Laboratory (LENI) of Ecole Polytechnique fédérale de Lausanne (EPFL) where Im leading the R&D activities in the field of Computer Aided Analysis and Design of Industrial Energy Systems with a major focus on sustainable energy conversion system development using thermo-economic optimisation methodologies. A part from the application and the development of process integration techniques, that remains my major field of expertise, the applications concern :
Rational use of water and energy in Industrial processes and industrial production sites : projects with NESTLE, EDF, VEOLIA and Borregaard (pulp and paper).Energy conversion and process design : biofuels from waste biomass (with GASNAT, EGO and PSI), water dessalination and waste water treatment plant (VEOLIA), power plant design (ALSTOM), Energy conversion from geothermal sources (BFE). Integrated energy systems in urban areas : together with SCANE and SIG (GE) and IEA annexe 42 for micro-cogeneration systems.
I as well contributed to the definition of the 2000 Watt society and to studies concerning the emergence of green technologies on the market in the frame of the Alliance for Global Sustainability.
Mounir Driss MensiTeaching & PhD Courses Advanced Solid State and Surface Characterization CH-633 State-of-the-art surface/thin film characterization methods of polycrystalline/nano/amorphous materials. Selected topics from X-ray scattering (SAXS/GISAXS, PDF, GIWAXS, HRXRD), electronic and optical spectroscopy (XPS, AES, SERS, TERS), scanning probe and electron microscopy (STM, AFM, HRTEM, SEM). Characterization of Materials 2025 MSE-716 This course introduces materials characterization techni
Vivek SubramanianTeaching & PhD PhD Students Giovanni Ruffolo, Giada Romano, Sanjay Manoharan, Kyle Haas, Claude Dahan, Biruktait Ayele Lemecho, Yagmur Ceren Alatas, Tugçe Delipinar Past EPFL PhD Students Amin Hodaei, Mustafa Mohieldin Fadlelmula Fadlelseed Past EPFL PhD Students as codirector Mohammad Jafarpour Courses Organic and printed electronics MICRO-505 This course addresses the implementation of organic and printed electronics technologies using large area manufacturing techniques. It will provide
Kamil SedlákTeaching & PhD PhD Students Daniel Louis Arthur Biek Courses Fusion and industrial plasma technologies PHYS-632 The course provides an overview of the technologies that are essential for fusion developments and for industrial plasmaapplications, highlighting the synergies between the two fields. The aim is to provide a combined theoretical andexperimental background to the various topics.
