Concept

Physical property

A physical property is any property that is measurable, involved in the state of a physical system, whose value represents the intensity on the object's state and behavior. The changes in the physical properties of a system can be used to describe its changes between momentary states. A quantifiable physical property is called physical quantity. Measurable physical quantities are often referred to as observables. Physical properties are often characterized as intensive and extensive properties. An intensive property does not depend on the size or extent of the system, nor on the amount of matter in the object, while an extensive property shows an additive relationship. These classifications are in general only valid in cases when smaller subdivisions of the sample do not interact in some physical or chemical process when combined. Properties may also be classified with respect to the directionality of their nature. For example, isotropic properties do not change with the direction of observation, and anisotropic properties do have spatial variance. It may be difficult to determine whether a given property is a material property or not. Color, for example, can be seen and measured; however, what one perceives as color is really an interpretation of the reflective properties of a surface and the light used to illuminate it. In this sense, many ostensibly physical properties are called supervenient. A supervenient property is one which is actual, but is secondary to some underlying reality. This is similar to the way in which objects are supervenient on atomic structure. A cup might have the physical properties of mass, shape, color, temperature, etc., but these properties are supervenient on the underlying atomic structure, which may in turn be supervenient on an underlying quantum structure. Physical properties are contrasted with chemical properties which determine the way a material behaves in a chemical reaction. The physical properties of an object that are traditionally defined by classical mechanics are often called mechanical properties.

Official source

https://en.wikipedia.org/wiki/Physical_property

About this result

This page is automatically generated and may contain information that is not correct, complete, up-to-date, or relevant to your search query. The same applies to every other page on this website. Please make sure to verify the information with EPFL's official sources.

Related courses (32)

PHYS-100: Advanced physics I (mechanics)

La Physique Générale I (avancée) couvre la mécanique du point et du solide indéformable. Apprendre la mécanique, c'est apprendre à mettre sous forme mathématique un phénomène physique, en modélisant la situation et appliquant les lois de la physique. ...

AR-219: Advanced CAO and Integrated Modeling DIM

1ère année: bases nécessaires à la représentation informatique 2D (3D). Passage d'un à plusieurs logiciels: compétence de choisir les outils adéquats en 2D et en 3D. Mise en relation des outils de CAO et DIM: regard critique et aptitude à choisir les métho ...

PHYS-460: Nonlinear dynamics, chaos and complex systems

The course provides students with the tools to approach the study of nonlinear systems and chaotic dynamics. Emphasis is given to concrete examples and numerical applications are carried out during the exercise sessions. ...

Related lectures (32)

Strain Gage Sensors

Explores strain gage sensors, discussing resistive and mechanical properties, response characteristics, and temperature effects.

Wood Properties

Explores the properties of wood, such as density, water content, thermal properties, and mechanical strength, including resistance and elasticity modulus.

Quantum Field Theory: BRST Symmetry

Covers the BRST symmetry in Quantum Field Theory, focusing on physical states and norm preservation.

Related publications (32)

DETERMINING PHYSICAL PROPERTIES OF A PHYSICAL SYSTEM THROUGH A GRAPH NEURAL NETWORK ENFORCING CONSERVATIONS OF PAIRWISE LINEAR AND ANGULAR MOMENTA

[0001] The invention is notably directed to a computer-implemented method of determining one or more physical properties of a physical system (10i, 10f, 10) represented by a graph neural network (GNN). The physical system is a multi-body dynamical system of components interacting through pairwise interactions, such as a 3D granular system. The GNN includes nodes and bidirectional edges that are mapped onto the components and the pairwise interactions, respectively. The method comprises: (i) accessing an

2026

PhysGen: Physically Grounded 3D Shape Generation for Industrial Design

Existing generative models for 3D shapes can synthesize high-fidelity and visually plausible shapes. For certain classes of shapes that have undergone an engineering design process, the realism of the shape is tightly coupled with the underlying physical properties, e.g., aerodynamic efficiency for automobiles. Since existing methods lack knowledge of such physics, they are unable to use this knowledge to enhance the realism of shape generation. Motivated by this, we propose a unified physics-based 3D shape

IEEE2026

Can Elastomers Combine Stiffness, Toughness and Fatigue Resistance?

Have you ever tried to wrap a stack of cards with a new rubber band and then repeated the same task with an old one? While new rubber bands are elastic and can easily encircle the stack, older rubber bands tend to lose elasticity, become brittle, and ultimately rupture. Rubber is a sub‐class of elastomers, which are solvent‐free polymeric networks. Above their glass transition temperature, T g , elastomers are characterized by a high stretchability. Yet, many homogeneous single network elastomers display a

Wiley2026

Graph Chat

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.

Official source

https://en.wikipedia.org/wiki/Physical_property

About this result

Related courses (32)

PHYS-100: Advanced physics I (mechanics)

AR-219: Advanced CAO and Integrated Modeling DIM

PHYS-460: Nonlinear dynamics, chaos and complex systems

Related lectures (32)

Strain Gage Sensors

Explores strain gage sensors, discussing resistive and mechanical properties, response characteristics, and temperature effects.

Wood Properties

Explores the properties of wood, such as density, water content, thermal properties, and mechanical strength, including resistance and elasticity modulus.

Quantum Field Theory: BRST Symmetry

Covers the BRST symmetry in Quantum Field Theory, focusing on physical states and norm preservation.

Related publications (32)

DETERMINING PHYSICAL PROPERTIES OF A PHYSICAL SYSTEM THROUGH A GRAPH NEURAL NETWORK ENFORCING CONSERVATIONS OF PAIRWISE LINEAR AND ANGULAR MOMENTA

2026

PhysGen: Physically Grounded 3D Shape Generation for Industrial Design

IEEE2026

Can Elastomers Combine Stiffness, Toughness and Fatigue Resistance?

Wiley2026

Related people (32)

Frédéric Pichelin

Teaching & PhD Courses Wood structures, properties and uses MSE-466 The presentation of tree growth and formation of wood anatomical structures, linked to the description of specific physical and mechanical properties, makes it possible to understand the different forms of utilisation of this material, including aspects of sustainable development.

Michael Stuer

Mission Study effects of dopants and structural defects on the microstructure development and the optical properties of transparent ceramics. Teaching & PhD PhD Students Katerina Urbancová, Annalena Erlacher Courses Advanced ceramic technologies MSE-495 Advanced ceramic processing concepts and technologies will be presented. Students will learn concepts on advanced technologically-relevant ceramic materials for a wide range of applications from MedTech, energy conversion & storage, with in

Dragan Damjanovic

Dragan Damjanovic received BSc diploma in Physics from the Faculty of Natural Sciences and Mathematics, University of Sarajevo, in 1980, and PhD in Ceramics Science from the Department of Materials Science and Engineering, College of Earth and Mineral Sciences, the Pennsylvania State University (PSU) in 1987. From 1988 to 1991 he was a research associate in the Materials Research Laboratory at the PSU. He joined the Ceramics Laboratory, Department of Materials Science and Engineering, Ecole polytechnique fédérale de Lausanne in 1991. He is currently a "professeur titulaire", heads the Group for Ferroelectrics and Functional Oxides at the Institute of Materials and teaches undergraduate and graduate courses on structure and electrical properties of materials. The research activities include fundamental and applied investigations of piezoelectric, ferroelectric and dielectric properties of a broad class of materials.

Roger Hersch

Roger D. Hersch is professor of Computer Science and head of the Peripheral Systems Laboratory at EPFL. He received his engineering degree from ETHZ in 1975, worked in industry from 1975 to 1980, and obtained his PhD degree from EPFL in 1985. He directed the widely known Visible Human Web Server project , which offers a number of services for the visualization of human anatomy. His current research focuses on color reproduction, spectral color prediction models, moiré imaging, and visual document security. Recent achievements include the PhotoProtect technology, which incorporates text as chromatic differences in order to protect identity photographs (Swiss driving license), microstructure imaging, which is used by railways companies (SNCF, RENFE) and festival organizers (Paleo) to print tickets at home and the band moire imaging technology for the protection of security documents.

Eugen Brühwiler

birth date: 19.11.1958 nationality: Swiss (native from Dussnang, Canton of Thurgau) Education : - July 1988 : doctoral degree from the Swiss Federal Institute of Technology in Lausanne (EPFL), Switzerland with a thesis entitled Fracture mechanics of dam concrete subjected to quasi-static and seismic loading conditions - December 1983 : civil engineering diploma (university degree) from the Swiss Federal Institute of Technology (ETH) in Zurich, Switzerland Professional Experience : - Since 1st April 1995 : Professor of Structural Engineering at EPFL and Head of the Laboratory of Maintenance, Construction and Safety for Civil Structures (MCS) (often considered being the first chair worldwide devoted exclusively to existing civil structures). - 1991-94 Project Manager and structural engineer with the Swiss Federal Railways (SBB), Division of Bridges and Structures, Zurich: Monitoring and maintenance of bridges and structures, Project manager and checking engineer for the construction of new bridges and rehabilitation of existing bridges. - 1989/90 Research associate at the Department of Civil Engineering, University of Colorado, Boulder, USA : Fracture mechanics of concrete and fracture of concrete dams. - 1986-88 Doctoral student at EPFL-LMC (Building Materials, Prof. Wittmann) : Fracture mechanics of concrete, fracture of concrete dams under seismic loading - 1984/85 Research engineer at EPFL-ICOM (Steel Structures, Prof. Badoux and Prof. Hirt) : Fatigue behaviour and fracture mechanics of riveted bridges

Eva Klok-Lermann

Teaching & PhD Courses Physical chemistry of polymeric materials MSE-431 The student has a basic understanding of the physical and physicochemical principles which result from the chainlike structure of synthetic macromolecules. The student can predict major characteristics of a polymer from its chemical structure and molecular architecture.

Julie Nathalie S Gheysen

Professionals experiences PhD student 2018–2022 Université Catholique de Louvain Teaching & PhD Courses Materials MSE-171 Introduction course of material science applied to usual building materials, especially concrete and metals. Description of their fabrication, mechanical and thermal properties and use in construction. Mechanical behaviour of materials MSE-234 This course provides an introduction to the mechanical behaviour, the processing, the structure and life-cycle o

Valerio Piazza

Teaching & PhD PhD Students Claire Valentine Blaga, Matilde Cantele, Julia Sarah Marhic Past EPFL PhD Students as codirector Michele Zendrini Courses Functional properties of materials MSE-210 The main objective of this course is to present the concepts allowing the understanding of the fundamental principles that enable to predict the properties of the materials. The goal is that with these concepts, one will be able to realize material design and/or to understand novel materials.

Andrea Cavallaro

Expertise I focus on machine learning for audio-visual sensing to enable systems to serve agreed purposes and improve their abilities through interactions with the environment, with other systems and with people. The goal of my research is to create the next-generation machine perception models for the effective use of sensory data, and the safe operation of autonomous systems that gain information about their environment and make decisions in partnership with humans or independently. These models are trans

Christian Köchli

Teaching & PhD PhD Students Maël Dagon Past EPFL PhD Students as codirector Sebastiano Merzaghi, Chafic Abu Antoun, Florian Louis Copt, Sofia Lydia Ntella Courses Actuators and Electromagnetic systems I MICRO-313 The course covers the main methods for the analysis of electromechanical systems. A study of magnetic physical quantities is followed by the conversion of electrical energy into mechanical energy. The permanent magnet is studied macroscopically. The dynamic aspect of the system is

Related units (31)

Related concepts (5)

Solid is one of the four fundamental states of matter (the others being liquid, gas, and plasma). The molecules in a solid are closely packed together and contain the least amount of kinetic energy. A solid is characterized by structural rigidity (as in rigid bodies) and resistance to a force applied to the surface. Unlike a liquid, a solid object does not flow to take on the shape of its container, nor does it expand to fill the entire available volume like a gas.

Physical object

In common usage and classical mechanics, a physical object or physical body (or simply an object or body) is a collection of matter within a defined contiguous boundary in three-dimensional space. The boundary surface must be defined and identified by the properties of the material, although it may change over time. The boundary is usually the visible or tangible surface of the object. The matter in the object is constrained (to a greater or lesser degree) to move as one object.

Temperature

Temperature is a physical quantity that expresses quantitatively the perceptions of hotness and coldness. Temperature is measured with a thermometer. Thermometers are calibrated in various temperature scales that historically have relied on various reference points and thermometric substances for definition. The most common scales are the Celsius scale with the unit symbol °C (formerly called centigrade), the Fahrenheit scale (°F), and the Kelvin scale (K), the latter being used predominantly for scientific purposes.

Related exercises (2)

Units and dimensional analysis

Dimensional analysis is a physical concept that helps understanding physical situations in which various physical quantities are used. It is also used to hypothetically link different physical quantities that can then be verified experimentally. For every physical quantity, there is a corresponding dimension, associated in mechanics to length (L), mass (M), time (T) and their combinations. For instance, the physical dimension of “velocity” v is length/time (L/T). The unit and dimension of a physical quant

Dielectric sphere

A dielectric sphere of radius R, subject to an uniform electric field

{\bf E}=E_0\,\hat{\bf z}

, is uniformly polarised (

\bf{P}=const)

. Determine the electric field inside the sphere and express it as function of the polarisation vector

\bf{P}

. Suggestion: Consider the superposition of two uniformly charged spheres, displaced from each other of a small distance d along the z axis, as in the figure. Take the origin of coordinate at the center of the negatively charged sphere. The electric field inside

Related notebooks (7)

AC Conductivity and Permittivity Calculations Using the Drude Model

Chapter 1: AC Conductivity and Permittivity¶{.anchor-link} {#Chapter-1:-AC-Conductivity-and-Permittivity}

::: ::: ::: ::: ::: {.jp-Cell .jp-MarkdownCell .jp-Notebook-cell} ::: {.jp-Cell-inputWrapper tabindex="0"} ::: {.jp-Collapser .jp-InputCollapser .jp-Cell-inputCollapser} ::: ::: {.jp-InputArea .jp-Cell-inputArea} ::: {.jp-InputPrompt .jp-InputArea-prompt} ::: ::: {.jp-RenderedHTMLCommon .jp-RenderedMarkdown .jp-MarkdownOutput mime-type="text/markdown"

Classical Monte Carlo Simulations of the Ising Model on Square Lattice

"## Classical Monte-Carlo simulations of the Ising model on square lattice\n", "\n", "The Ising model considers the following Hamiltonian\n", "\n", "

\\hat{\\mathcal{H}} = -J\\displaystyle\\sum_{}\\sigma_i \\sigma_j

,\n", "\n", "in which spins

\\sigma_i

can take only two discrete values

\\sigma_i \\in \\{-1,+1\\}

. Below, we will consider spins on two-dimensional square lattice taking into account couplings

J

only for the nearest neighbor sites. For

J > 0

the ferromagneti

Calculation and plotting of some important quantities relative to the electron s properties in a conventional TEM

::: {role="main"} ::: {.jp-Cell .jp-MarkdownCell .jp-Notebook-cell} ::: {.jp-Cell-inputWrapper tabindex="0"} ::: {.jp-Collapser .jp-InputCollapser .jp-Cell-inputCollapser} ::: ::: {.jp-InputArea .jp-Cell-inputArea} ::: {.jp-InputPrompt .jp-InputArea-prompt} ::: ::: {.jp-RenderedHTMLCommon .jp-RenderedMarkdown .jp-MarkdownOutput mime-type="text/markdown"} A typical TEM works with acceleration voltages between 80 and 300 kV ::: ::: ::: ::: ::: {.jp-Cell .jp-CodeCell .jp-Notebook-cell .jp-mod-noOutputs} ::

Understanding and Plotting the Discrete Fourier Transform (DFT)

Plotting the DFT[1]¶

                                      [2]Paolo Prandoni, [3]LCAV, EPFL

In this notebook we will look at the practical issues associated to plotting the DFT and in particular the DFT of real-world signals. We will examine how to map the DFT coefficients to real-world frequencies and we will investigate the frequency resolution of the DFT and the effects of zero padding. In [1]:

first our usual bookkeeping

%matplotlib inline import matplotlib import matplotlib.p

Digital Simulation of Guitar Feedback in I Feel Fine by The Beatles

I Feel Fine, Digitally[1]¶ This notebook is a little musing inspired by the "internal mechanics" of a very famous audio snippet, namely the guitar sound at the beginning of the song "I Feel Fine", written and recorded by the Beatles in 1964. The historical significance of the record lies in the following claim by John Lennon:

 "I defy anybody to find a record... unless it is some old blues
 record from 1922... that uses feedback that way. So I claim it for
 the Beatles. Before H