Bob de GraffenriedExpertise
Soft skills: critical thinking, team spirit, autonomy, sense of organization and responsibility, communication.Hard skills: data acquisition, imaging, electronics, programming, IT, UAV, mechanics, in-situ measurements.
Mission
Technical manager of the unit & supervision of PhD students/civilists/students.Laboratory experiments for researchers:Design of physical models (channels, inclined planes, sediment feeders, etc.);Installation of lasers, cameras, motors, sensors, etc.;High-speed data and imag
Alina KleimenovaTeaching & PhD Courses Physics project II PHYS-422 The student applies the competencies acquired during her/his studies in a research study developed in one of the laboratories of the physics section under the supervision of teacher of the section. The student is present during a whole day of the week in the laboratory during the semester.
Horst PickTeaching & PhD PhD Students Vivek Prakash, Yang Wang Past EPFL PhD Students as codirector Olivia Baud, Thamani Dahoun, Enio Daniel Zanchetta Courses Biotechnology lab (for CGC) ChE-433 This laboratory-training course is designed to give students a comprehensive insight into laboratory research techniques in the field of biotechnology and pharmaceutical biotechnology with practices employed in the industry. Accompanying lectures provide the theoretical background. Chemosensory receptors:
Raffaella BuonsantiTeaching & PhD PhD Students Riya Gupta, Jennifer Calderon Mora, Coline Boulanger, Moritz Tritschler, Marco Fabbiano, Seyedmohamadjavad Chabok, Hugh Andrew Warkentin Past EPFL PhD Students Chethana Janardhana Gadiyar, Seryio Saris, Valeria Mantella, Seyedehbehnaz Varandili, Pranit Srinivas Iyengar, Yannick Thomas Guntern, Jan Vávra, Laia Castilla Amorós, Valery Okatenko, Ona Segura Lecina, Ludovic Emile Frédy Zaza, Petru Pasquale Albertini Courses Introduction to chemical engineering Laboratory Works
Emma Christine Joelle LarceletEmma Larcelet is an architect and PhD candidate at the Arts for Science Laboratory (LAPIS) where she teaches and researches architectural representation’s entwining with digital technologies. Larcelet is currently leading her doctoral research project, Analog and Digital: Addressing the Continuity of Architectural Drawing Practice in the Design Process, funded by the Swiss National Science Foundation (SNSF), under the supervision of Prof. Nicola Braghieri (LAPIS, EPFL) and the co-supervision of Prof. Theodo
Julien Alexandre AndresTeaching & PhD Courses Advanced general chemistry CH-160(f) This course aims at the acquisition of essential notions on the structure of matter, chemical equilibria and reactivity. Theoretical teaching and exercise provide the methodology to analyze and solve by reasoning and calculation novel problems of general chemistry. Advanced general chemistry (for SFU) UNIL-160 The aim of this course is to acquire the essential concepts relating to the structure of matter and chemical
Angela SteinauerSince 2022: Head of the Laboratory of Biomolecular Engineering and Nanomedicine (LIBN), EPFL (Switzerland)2019-2021: MSCA Postdoctoral Fellow at ETHZ (Switzerland)2018: Ph.D. in Chemical Biology from Yale University (USA)2007-2012: B.Sc. & M.Sc. in Chemistry from University of Zurich (Switzerland)
Teaching & PhD PhD Students Diogo Miguel De Abreu Viegas, Georges Barnikol, Oliver Dennis, Andrea Elizabeth Melgar Aguilar, Paula Oeser, Manutsawee Thanaburakorn Courses Advanced general chemistry I CH
Solaiman Shokur2019 - now : Senior Scientist, Translational neuroengineering Laboratory, EPFL(Geneva)
Team leader: CHRONOS project, a multi-center European project that aims at developing the first chronically implanted prosthetic hand for transradial amputee patients with bidirectional communication capabilities. NCCR Robotics: Bi-directional control of supernumerary limbs.2014-2019: Research Coordinator, AASDAP (São Paulo, Brazil) Responsible for both the scientific production and the clinical protocol at the AASDAP neurorehabilitation laboratory.
2013-2014: Postdoctoral associate, Walk again project, Insituto Santos Dumond. (Natal, RN, Brazil)Head of the engineering team in charge of the system integration. 2010-2012: Visiting scientist, Nicolelis Lab (Duke University).
Development and validation of a virtual-reality based brain-machine interface for rhesus monkeys.
2007 – 2010: Teaching assistant, Laboratory of Robotics Systems (EPFL)
Alejandro Roda BuchExpertise
TribologyContact Mechanics ModelingData AcquisitionDynamics of Mechanical SystemsData Science
Alejandro Roda Buch is Assistant Professor at the Universitat Politècnica de València (UPV, Spain) in the Mechanical and Material Engineering Department. Currently he spends a sabbatical period at EPFL. He has a master degree in Industrial Engineering (Mechanical Engineering specialization) and a PhD in Railway Contact Mechanics (2006) from UPV. He conducted two Postdoctoral researches at EPFL (2006 and 2
Mirko KovacExpertise
Aerial RoboticsEnvironmental SensingSustainability RoboticsPhysical Artificial Intelligence
Short Biography Prof. Mirko Kovač is Director of the Laboratory of Sustainability Robotics, jointly appointed at the Swiss Federal Laboratories for Materials Science and Technology (Empa) in Zürich and the Swiss Federal Institute of Technology Lausanne (EPFL). He holds an Honorary Professorship at Imperial College London, where he previously served as Full Professor and founded the Aerial Robotics Laborator
Gregor JotzuGregor Jotzu is heading the Dynamic Quantum Materials Laboratory (DQML) at EPFL. His research concerns the control of quantum materials using intense low-frequency laser pulses and the dynamics of order formation in strongly correlated quantum systems.After reading physics at the University of Oxford, he became the 2009/2010 Michael von Clemm Fellow at Harvard University. He received his doctorate from ETH Zurich, where he studied quantum magnetism and driving-induced order using ultracold atoms in optical
Harm-Anton KlokExpertise
Polymer design at nanoscaleBiologically-inspired polymers
Mission
Research at the Laboratory of Polymer (LP) focuses on the development of novel advanced polymeric materials with potential applications in optics, electronics or medicine. The philosophy is that precise control over nanoscale structure is an important prerequisite to tailor polymer properties. To this end, a “bottom-up” approach is followed, which starts with designing a new material at the molecular level, in order to be able to pr
Andrea CapozziExpertise
Nuclear Magnetic Resonance (NMR)Electron Spin Resonance (ESR)Dynamic Nuclear Polarization (DNP)Hyperpolarization TechniquesCryogenics
Open PhD positions
Open PhD position on the Physics of Xenon hyperpolarizationA PhD student position is available on the Physics of Xenon hyperpolarization: Spin Exchange Optical Pumping (SEOP) and Dynamic Nuclear Polarization (DNP)The project builds on a well-established and long-standing collaboration between the Laboratory for Functional and Metabolic Imaging at
Thierry MeyerThierry Meyer received in 1986 a diploma degree (MSc) in chemical engineering from the Swiss Federal Institute of Technology at Lausanne (EPFL). He was awarded in 1989 a PhD at EPFL for his thesis on micromixing in highly viscous polymeric media. He joined the Institute of Chemical Engineering from 1989 till 1993 as senior scientist in the field of polymerization reactions. In 1994 he joined Ciba-Geigy SA in the pigment division as successively development chemist, head of development a.i. and finally production manager for high performance pigments. Returning to the Institute of Chemical Engineering at EPFL in Lausanne by the end of 1998, he was nominated maître denseignement et de recherche (MER) for leading a new research group in the field of polymers and supercritical fluids, and teaching to chemists, chemical engineers and material sciences, disciplines as process development, introduction to chemical engineering, polymer and organic chemistry at master and bachelor program. In 2005 he owned the responsibility of the Occupational Health and Safety of the school of basic sciences on top of his research activities dealing with risk management and supercritical fluids. He is presently teaching introduction to chemical engineering at bachelor level, risk management at master level and specific courses on safety and engineering risk management in continuing education. He acts also as consultant and expert in risk assessment and chemical engineering matters by the ICC (International Chamber of Commerce) of the World Business Organization, by several consultancy companies and by major and SMEs chemical industries. Thierry Meyer is currently member of several international associations of the European Federation of Chemical Engineering, American institution of chemical engineering, American chemical society and senior member of the American Institute of Chemical Engineers. He was elected chairman of the European Working Party on Polymer Reaction Engineering from 2001 till 2006. He his currently the Swiss academic member of the European Working Party on Loss Prevention and Safety Promotion as well as of the European Working Party on Education. He is member of several editorial boards: Chemical Engineering Research and Design, Macromolecular Reaction Engineering, Chemical Engineering and Technology, Journal of Chemical Health and Safety.
Esteban Curras RiveraTeaching & PhD Courses Master project in Physics PHYS-599(b) The student realises a research project in a physics laboratory or in a company. Specialisation semester PHYS-597 Students have the opportunity to apply their knowledge in a project contributing to specialize them in a physics field. The project can take place in an external or internal laboratory or in a research institute.
Iva Tkalcec VâjuTeaching & PhD Past EPFL PhD Students as codirector Lucas Degeneve Courses Physics lab (metrology) PHYS-117 This course is a practical introduction to classical measurement techniques in a physics laboratory. It aims at familiarising the students with data acquisition, sensors, signal processing, vacuum and cryogenics. Physics lab IIIa PHYS-319 The students observe a number of physical phenomena and their technological applications. The course aims at acquiring knowledge abou
Giovanni De CesareExpertise
Numerical simulation and physical modeling of hydraulic works and schemes; reservoir sedimentation and turbidity currents; reservoir sediment management; Ultrasonic Doppler flow measurement; river training work and restoration; soil bioengineering and nature based solutions; fluvial eco-morphology; rapid transients in pressurized waterways; technology transfer, commissioned studies and expert reports in applied hydraulics, hydraulic constructions and infrastructures; organization of continuous edu
Daniel SageExpertise
PublicationsPublications
Coordinates Biomedical Imaging GroupAddressEPFL STI-IMT-LIB, BM 4.135, Station 17, CH-1015 Lausanne, SwitzerlandTel.+41 21 693 51 89Fax.+41 21 693 68 10Emaildaniel.sage@epfl.chWeb pagehttp://bigwww.epfl.ch/sage/OfficeBM 4.135
Teaching & PhD Past EPFL PhD Students as codirector Daniel Andreas Schmitter, Anaïs Badoual, Laurène Donati Courses Bioimage informatics BIO-410 The course provides a comprehensive overview of methods, algorithms, and computer tools us Dominique BonvinDominique Bonvin is Professor and Director of the Automatic Control Laboratory of EPFL. He received his Diploma in Chemical Engineering from ETH Zürich, and his Ph.D. degree from the University of California, Santa Barbara. He worked in the field of process control for the Sandoz Corporation in Basel and with the Systems Engineering Group of ETH Zürich. He joined the EPFL in 1989, where his current research interests include modeling, control and optimization of dynamic systems. He served as Director of the Automatic Control Laboratory for the periods 1993-97, 2003-2007 and again since 2012, Head of the Mechanical Engineering Department in 1995-97 and Dean of Bachelor and Master Studies at EPFL for the period 2004-2011.
Amin KaboliDr. Amin Kaboli is an external lecturer for at the Mechanical Engineering Section at EPFL and teaches Production Management (ME-419), Continuous Improvement (ME-498) to graduate students and Digital Supply Chain, Innovation and Digitization, and Sustainable Change Leadership to business executives and managers at International Institute for the Management of Logistics and Supply Chain (IML).
Amin supports many organizations ranging from Fortune 500 corporations to entrepreneurial firms and industries as diverse as Watch, Consumer Goods, Food and Beverage, MedTech, and Pharma. He obtained his Ph.D. in Manufacturing Systems & Robotics, specialized in Supply Chain Management from EPFL. You can watch his TEDx talk on “Leading Change Consciously” here. TEDx talk here.
