Mediaspace scheduled maintenance: Aug 25, 2026 07:00 - 12:00 AM. During this time, videos will be temporarily unavailable. Check status updates.

Concept

Indentation hardness

Related publications (28)

Nanoindentation hardness and modulus of Al2O3-SiO2-CaO and MnO-SiO2-FeO inclusions in iron

Andreas Mortensen, Léa Deillon, Alejandra Inés Slagter, David Hernandez Escobar, Eva Luisa Vogt, Jonathan Aristya Setyadji

Dataset corresponding to the following manuscript: Slagter, A., Setyadji, J.A., Vogt, E.L. et al. Nanoindentation Hardness and Modulus of Al2O3–SiO2–CaO and MnO–SiO2–FeO Inclusions in Iron. Metall Mater Trans A (2024). https://doi.org/10.1007/s11661-024-0 ...

Zenodo2024

Dislocation Hardening in a New Manufacturing Route of Ferritic Oxide Dispersion-Strengthened Fe-14Cr Cladding Tube

Roland Logé

The microstructure evolution associated with the cold forming sequence of an Fe-14Cr-1W-0.3Ti-0.3Y2O3 grade ferritic stainless steel strengthened by dispersion of nano oxides (ODS) was investigated. The material, initially hot extruded at 1100 degrees C an ...

MDPI2024

Effect of Mo addition on the mechanical and tribological properties of magnetron sputtered TiN films

Sami Rtimi

Ternary-based titanium nitride (TiN) thin films have drawn attention toward rational applications due to their wear resistance, high hardness, and corrosion resistance. The influence of Mo content on the structural, tribo-logical, and mechanical properties ...

ELSEVIER SCIENCE SA2023

Microstructure et usinabilité d'alliages de titane béta-métastable

Loïc Favre

Titanium has become in recent years an interesting material in many applications that require a combination of high mechanical properties and low density. It has the peculiarity of undergoing an allotropic transformation at 882°C. Below this temperature, ...

EPFL2023

Micromechanics of oxide inclusions in ferrous alloys

Alejandra Inés Slagter

Oxide inclusions are inevitably present in steel as a direct consequence of the steelmaking process; as a result, a cubic centimetre of modern steel will generally contain about a million of these hard and brittle micrometre-sized ceramic particles. Inclus ...

EPFL2023

Atomic-scale Characterization of Strain and Gate effects on Two-dimensional Materials by Scanning Tunneling Microscopy

Jz -Yuan Juo

Strain is an inevitable phenomenon in two-dimensional (2D) material, regardless of whether the film is suspended or supported. Moreover, strain is known to alter the physical and chemical properties, such as the band gap, charge carrier effective masses, d ...

EPFL2023

The double exponential runtime is tight for 2-stage stochastic ILPs

Kim-Manuel Klein, Alexandra Anna Lassota

We consider fundamental algorithmic number theoretic problems and their relation to a class of block structured Integer Linear Programs (ILPs) called 2-stage stochastic. A 2-stage stochastic ILP is an integer program of the form min{c(T)x vertical bar Ax = ...

SPRINGER HEIDELBERG2022

Probing the buckling of pressurized spherical shells

Pedro Miguel Nunes Pereira de Almeida Reis, Dong Yan, Arefeh Abbasi

The prediction of the critical buckling conditions of shell structures is plagued by imperfection sensitivity. Non-destructive testing through point-load probing has been recently proposed to map the stability landscape of cylindrical shells. However, the ...

2021

Additive manufacturing of a precious bulk metallic glass

Roland Logé, Jamasp Jhabvala, Antonia Neels, Navid Sohrabi, Güven Kurtuldu, Annapaola Parrilli

For the first time, a high-density amorphous and crack-free bulk metallic glass (BMG) based on a precious metal (PdCuNiP) was produced via additive manufacturing (AM). Laser powder-bed fusion (LPBF) was used for the fabrication of the samples, and led to a ...

2021

Additive Manufacturing of Bulk Metallic Glasses-Process, Challenges and Properties: A Review

Roland Logé, Jamasp Jhabvala, Navid Sohrabi

Bulk Metallic Glasses (BMG) are metallic alloys that have the ability to solidify in an amorphous state. BMGs show enhanced properties, for instance, high hardness, strength, and excellent corrosion and wear resistance. BMGs produced by conventional method ...

MDPI2021

Thermomechanical Nanostraining of Two-Dimensional Materials

Jürgen Brugger, Giovanni Boero, Xia Liu, Ana Conde Rubio, Samuel Tobias Howell

Local bandgap tuning in two-dimensional (2D) materials is of significant importance for electronic and optoelectronic devices but achieving controllable and reproducible strain engineering at the nanoscale remains a challenge. Here, we report on thermomech ...

American Chemical Society (ACS)2020

Characterization, mechanical properties and dimensional accuracy of a Zr-based bulk metallic glass manufactured via laser powder-bed fusion

Roland Logé, Steven Van Petegem, Jamasp Jhabvala, Antonia Neels, Güven Kurtuldu, Navid Sohrabi, Annapaola Parrilli

Bulk metallic glasses (BMGs) are high-strength, highly elastic materials due to their disordered atomic structure. Because BMGs require sufficiently high cooling rates to bypass crystallization, laser-based additive manufacturing (AM) methods have recently ...

2020

Cold stiffening of orthotropic steel decks by a composite UHPFRC layer

Eugen Brühwiler, Lan Duan

Cold stiffening of the plate of Orthotropic Steel Deck (OSD) of bridges can be achieved by adding a layer of Ultra-High Performance Fiber Reinforced Cementitious Composite material (UHPFRC) on top of the deck plate by composite design, thus expecting to re ...

ELSEVIER SCI LTD2020

Evaluation of the mechanical properties of the heat treated FeCrCuMnNi high entropy alloy

Roland Logé

As cast FeCrCuMnNi high entropy alloys were heat treated at different temperatures and times. Structure and mechanical properties of the heat treated alloy were studied using X-Ray diffraction, tensile test, hardness test and scanning electron microscopy. ...

2019

Experimental Assessment of the Impact of Partial Saturation On the Mechanical Properties of Gas Shales

Lyesse Laloui, Alessio Ferrari, Alberto Minardi

The impact of partial water saturation on the mechanical behaviour of clays and claystones has been widely proved. This work aims at demonstrating that also for gas shales partial water saturation has a significant influ-ence on their stiffness and strengt ...

2019

Full-scale in-situ tests on energy piles: Head and base-restraining effects on the structural behaviour of three energy piles

Melis Sütman

Energy piles, due to their dual roles, are exposed to temperature change throughout their life time, which may cause axial displacements, additional axial stresses and changes in the shaft resistance along their lengths. The extent of these effects highly ...

ELSEVIER SCIENCE BV2019

Microstructure and Mechanical Properties of a Multiphase FeCrCuMnNi High-Entropy Alloy

Roland Logé

A FeCrCuMnNi high-entropy alloy was produced using vacuum induction melting, starting from high-purity raw materials. The microstructure and mechanical properties of the as-cast FeCrCuMnNi alloy were studied, considering x-ray diffraction (XRD), scanning e ...

SPRINGER2019

Depth-dependent mechanical properties of human articular cartilage obtained by indentation measurements

Pierre-Etienne Bourban, Lee Ann Laurent-Applegate, Matteo Gregorio Modesto Marascio, Robin Martin, Jens Antons

Emerging 3D printing technology permits innovative approaches to manufacture cartilage scaffolds associated with layer-by-layer mechanical property adaptation. However, information about gradients of mechanical properties in human articular cartilage is li ...

2018

Test and lower bound modeling of keyed shear connections in RC shear walls

Aurelio Muttoni, Jesper Harrild Sorensen

This paper presents an investigation into the ultimate behavior of a recently developed design for keyed shear connections. The influence of the key depth on the failure mode and ductility of the connection has been studied by push-off tests. The tests sho ...

Engineering Structures2018

Elastic behavior of partially saturated gas shales during unloading - reloading cycles in uniaxial compression

Lyesse Laloui, Alessio Ferrari, Alberto Minardi

Elastic properties of gas shales are of utmost importance for the exploitation of shale gas reservoirs. Static elastic properties are usually measured by performing unloading-reloading cycles in uniaxial or triaxial compressive tests. The response of gas s ...

2018