André HodderTeaching & PhD PhD Students Lucien André Félicien Pierrejean Past EPFL PhD Students as codirector Simone Rametti Courses Actuators and Electromagnetic systems II MICRO-314 The students will be able to model, simulate and measure actuators and electrical motors Advanced lab in electrical energy systems EE-588 Pre-requisites required. The number of places is limited. Please register only after having obtained the teacher's agreement. The purpose of this teaching lab is to put
Dario FloreanoProf. Dario Floreano is director of the Laboratory of Intelligent Systems at the Swiss Federal Institute of Technology Lausanne (EPFL). Since 2010, he is the founding director of the Swiss National Center of Competence in Robotics, a research program that brings together more than 20 labs across Switzerland. Prof. Floreano holds an M.A. in Vision, an M.S. in Neural Computation, and a PhD in Robotics. He has held research positions at Sony Computer Science Laboratory, at Caltech/JPL, and at Harvard University. His main research interests are Robotics and A.I. at the convergence of biology and engineering. Prof. Floreano made pioneering contributions to the fields of evolutionary robotics, aerial robotics, and soft robotics. He served in numerous advisory boards and committees, including the Future and Emerging Technologies division of the European Commission, the World Economic Forum Agenda Council, the International Society of Artificial Life, the International Neural Network Society, and in the editorial committee of several scientific journals. In addition, he helped spinning off two drone companies (senseFly.com and Flyability.com) and a non-for-profit portal on robotics and A.I. (RoboHub.org). Books
Manuale sulle Reti Neurali, il Mulino (in Italian), 1996 (first edition), 2006 (second edition)Evolutionary Robotics, MIT Press, 2000
Bio-Inspired Artificial Intelligence, MIT Press, 2008
Flying Insects and Robots, Springer Verlag, 2010
Friedhelm Christoph HummelExpertise
Stroke recovery Healthy Aging Motor Control Motor Learning Cognitive Control Neuroplasticity Non-invasive Brain Stimulation Structural and functional Neuroimaging Connectivity
Postal Address Campus Biotech
Defitech Chair of Clinical Neuroengineering Brain Mind Institute, SV Neuro X Institute, Swiss Federal Institute of Technology EPFL Campus Biotech Rm H4.3.132.084, 9, Chemin des Mines 1202 Geneva
Teaching & PhD PhD Students Maria Ploumitsakou, Simona Losacco, Fabienne Windel, Andrea Protani, Sta
Aude BillardExpertise
RoboticsMachine LearningArtificial IntelligenceHuman-Robot InteractionMechatronicsDynamical Systems ControlComputational Neuroscience
Aude Billard is full professor and head of the LASA laboratory at the School of Engineering at the Swiss Institute of Technology Lausanne (EPFL), and the Director of the Swiss Innovation Booster on Robotics. Dr. Billard acts as the President of the IEEE Robotics and Automation Society (RAS), after serving in several roles in the administrative and executive committe
Kamiar AminianKamiar Aminian received the M.S. degree in electrical engineering in 1982, the Ph.D degree in biomedical engineering in 1989 and the Postgraduate degree on technical computing in 1993 from Ecole Polytechnique Fédérale de Lausanne (EPFL). He was assistant professor (1994-1996) with Sharif University of Technology (Tehran). He joint EPFL in 1996 where he is currently Professor of medical instrumentation and the director of the Laboratory of Movement Analysis and Measurement in the Institute of Bioengineering of EPFL. His research interests include methodologies for human movement monitoring and analysis in real world conditions mainly based on wearable technologies and inertial sensors with emphasis on gait, physical activity and sport. His research aims to perform outcome evaluation in orthopaedics, to improve motor function and intervention programs in aging and patients with movement disorders and pain, and to identify metrics of performance in sport science.
Kamiar Aminian is a member of the International Society of Posture and Gait Research, the Institute of Electrical and Electronics Engineers, the European Society of Movement Analysis in Adults and Children, the Prevention of fall Network Europe, the Intentional Society of Biomechanics and the President of the 3D analysis of the human movement group. He is author or co-author of more than 450 scientific papers published in reviewed journals and presented at international conferences and holds 10 patents related to medical devices.
Full CV
ORCID
Christian KöchliTeaching & PhD PhD Students Maël Dagon Past EPFL PhD Students as codirector Sebastiano Merzaghi, Chafic Abu Antoun, Florian Louis Copt, Sofia Lydia Ntella Courses Actuators and Electromagnetic systems I MICRO-313 The course covers the main methods for the analysis of electromechanical systems. A study of magnetic physical quantities is followed by the conversion of electrical energy into mechanical energy. The permanent magnet is studied macroscopically. The dynamic aspect of the system is
Drazen DujicDrazen Dujic is an Associate Professor and Head of the Power Electronics Laboratory at EPFL. He received the Dipl.Ing. and MSc degrees from the University of Novi Sad, Serbia in 2002 and 2005, respectively, and the PhD degree from Liverpool John Moores University, UK in 2008. From 2003 to 2006, he was a Research Assistant with the Faculty of Technical Sciences at University of Novi Sad. From 2006 to 2009, he was a Research Associate with Liverpool John Moores University. After that he moved to industry and joined ABB Switzerland Ltd, where from 2009 to 2013, he was Scientist and then Principal Scientist with ABB Corporate Research Center in Baden-Dättwil, and from 2013 to 2014 he was R&D Platform Manager with ABB Medium Voltage Drives in Turgi. He joined EPFL in 2014 as Tenure Track Assistant Professor and was promoted to Associate Professor in 2021. His research interests include the areas of design and control of advanced high power electronic systems and high-performance drives, predominantly for the medium voltage applications related to electrical energy generation, conversion and storage. He has authored or coauthored more than 150 scientific publications and has filed 16 patents. In 2018 he received EPE Outstanding Service Award from European Power Electronics and Drives Association and in 2014 the Isao Takahashi Power Electronics Award for Outstanding Achievement in Power Electronics. He is Senior Member of IEEE, and serves as Associate Editor for IEEE Transactions on Power Electronics, IEEE Transactions on Industrial Electronics and IET Electric Power Applications. He is Chairman of the Swiss IEEE Power Electronics Society (PELS) Chapter and IEEE PELS R8 Chair.
Tobias KippenbergTobias J. Kippenberg is Full Professor of Physics at EPFL and leads the Laboratory of Photonics and Quantum Measurement. He obtained his BA at the RWTH Aachen, and MA and PhD at the California Institute of Technology (Caltech in Pasadena, USA). From 2005- 2009 he lead an Independent Research Group at the MPI of Quantum Optics, and is at EPFL since. His research interest are the Science and Applications of ultra high Q microcavities; in particular with his research group he discovered chip-scale Kerr frequency comb generation (Nature 2007, Science 2011) and observed radiation pressure backaction effects in microresonators that now developed into the field of cavity optomechanics (Science 2008). Tobias Kippenberg is alumni of the “Studienstiftung des Deutschen Volkes”. For his invention of “chip-scale frequency combs” he received he Helmholtz Price for Metrology (2009) and the EFTF Young Investigator Award (2010). For his research on cavity optomechanics, he received the EPS Fresnel Prize (2009). In addition he is recipient of the ICO Prize in Optics (2014), the Swiss National Latsis award (2015), the German Wilhelm Klung Award (2015) and ZEISS Research Award (2018). He is fellow of the APS and OSA, and listed since 2014 in the Thomas Reuters highlycited.com in the domain of Physics. EDUCATION 2009: Habilitation (Venia Legendi) in Physics, Ludwig-Maximilians-Universität München 2004: PhD, California Institute of Technology (Advisor Professor Kerry Vahala) 2000: Master of Science (Applied Physics), California Institute of Technology 1998: BA in Physics, Technical University of Aachen (RWTH), Germany 1998: BA in Electrical Engineering, Technical University of Aachen (RWTH), Germany ACADEMIC POSITIONS 2013 - present: Full Professor EPFL 2010 - 2012: Associate Professor EPFL 2008 - 2010: Tenure Track Assistant Professor, Ecole Polytechnique Federale de Lausanne 2007 - present: Marie Curie Excellent Grant Team Leader, Max Planck Institute of Quantum Optics (Division of Prof.T.W. Hänsch) 2005 - present: Leader of an Independent Junior Research Group, Max Planck Institute 2005- present: Habilitant (Prof. Hänsch) Ludwig-Maximilians-Universität (LMU) 2005-2006: Postdoctoral Scholar, Center for the Physics of Information, California Institute of Technology 2000-2004: Graduate Research Assistant, California Institute of Technology PRIZES AND HONORS: ZEISS Research Award 2018 Fellow of the APS 2016 Klung-Wilhelmy Prize 2015 Swiss Latsis Prize 2014 Selected Thomson Reuters Highly Cited Researcher in Physics, 2014/2015 ICO Prize, 2013 EFTF Young Scientist Award (for "invention of microresonator based frequency combs") 2010 Fresnel Prize of the European Physical Society (for contributions to Optomechanics) 2009 Helmholtz Prize for Metrology (for invention of the monolithic frequency comb) 2009 1st Prize winner of the EU Contest for Young Scientists, Helsinki, Finland. Sept. 1996 Jugend forscht 1st Physics Prize at the German National Science Contest May 1996 FELLOWSHIPS Fellow of the German National Merit Foundation ("Studienstiftung des Deutschen Volkes") 1998-2002 Member of the Daimler-Chysler-Fellowship-Organization 1998-2002 Dr. Ulderup Fellowship 1999-2000 RESEARCH INTERESTS Experimental and theoretical research in photonics, notably high Q optical microcavities and their use in cavity quantum optomechanics and frequency metrology PUBLICATIONS AND OFTEN CITED METRICS*: >70 Publications in peer reviewed journals Researcher Google Profile: http://scholar.google.ch/citations?user=PRCbG2kAAAAJ&hl=en h-Index 54 (Google scholar H: 64, >25,000 citations) Thomson Reuters/Claravite List of Highly Cited Researchers (2014,2015,2016,2017) careful in its use: https://www.aps.org/publications/apsnews/201411/backpage.cfm KEY PUBLICATIONS AND REVIEWS: A. Ghadimi, et al. Elastic strain engineering for ultra high Q nanomechanical oscillators Science, (2018) Trocha, et al. Ultrafast distance measurements using soliton microresonator frequency combs Science, Vol. 359 (2018) [joint work with C. Koos] Pablo-Marin et al. Microresonator-based solitons for massively parallel coherent optical communications Nature (2017) [joint work with C. Koos] V. Brasch, et al. Photonic chip-based optical frequency comb using soliton Cherenkov radiation. Science, vol. 351, num. 6271 (2015) Aspelmeyer, M., Kippenberg, T. J. & Marquardt, F. Cavity optomechanics. Reviews of Modern Physics 86, 1391-1452, (2014) Wilson, D. J. et al. Measurement and control of a mechanical oscillator at its thermal decoherence rate. Nature (2014). Verhagen, E., Deleglise, S., Weis, S., Schliesser, A. & Kippenberg, T. J. Quantum-coherent coupling of a mechanical oscillator to an optical cavity mode. Nature 482, 63-67 (2012). Kippenberg, T. J., Holzwarth, R. & Diddams, S. A. Microresonator-based optical frequency combs. Science 332, 555-559, (2011). Weis, S. et al. Optomechanically induced transparency. Science 330, 1520-1523 (2010). Kippenberg, T. J. & Vahala, K. J. Cavity optomechanics: back-action at the mesoscale. Science 321, 1172-1176, (2008). Del'Haye, P. et al. Optical frequency comb generation from a monolithic microresonator. Nature (2007) Schliesser, A., DelHaye, P., Nooshi, N., Vahala, K. & Kippenberg, T. Radiation Pressure Cooling of a Micromechanical Oscillator Using Dynamical Backaction. Physical Review Letters 97, (2006). Auke IjspeertAuke Ijspeert is a full professor at the EPFL, and head of the Biorobotics Laboratory (BioRob). He has a B.Sc./M.Sc. in physics from the EPFL (1995), and a PhD in artificial intelligence from the University of Edinburgh (1999). He carried out postdocs at IDSIA and EPFL, and at the University of Southern California (USC). He then became a research assistant professor at USC, and an external collaborator at ATR (Advanced Telecommunications Research institute) in Japan. In 2002, he came back to the EPFL as an SNF assistant professor. He was promoted to associate professor in October 2009 and to full professor in April 2016. His primary affiliation is with the Institute of Bioengineering, and secondary affiliation with the Institute of Mechanical Engineering. His research interests are at the intersection between robotics, computational neuroscience, nonlinear dynamical systems, and machine learning. He is interested in using numerical simulations and robots to get a better understanding of sensorimotor coordination in animals, and in using inspiration from biology to design novel types of robots and adaptive controllers. (see for instance Ijspeert et al Science 2007, Ijspeert Science 2014, and Nyakatura et al Nature 2019). He is also investigating how to assist people with limited mobility using exoskeletons and assistive furniture. He is regularly invited to give talks on these topics (e.g. TED talk given at TED Global Geneva, Dec 8 2015). With his colleagues, he has received paper awards at ICRA2002, CLAWAR2005, IEEE Humanoids 2007, IEEE ROMAN 2014, CLAWAR 2015, SAB2018, and CLAWAR 2019. He is an IEEE Fellow, member of the Board of Reviewing Editors of Science magazine, and associate editor for the IEEE Transactions on Medical Robotics and Bionics and for the International Journal of Humanoid Robotics. He has acted as an associate editor for the IEEE Transactions on Robotics (2009-2013) and for Soft Robotics (2018-2021). He was a guest editor for the Proceedings of IEEE, IEEE Transactions on Biomedical Engineering, Autonomous Robots, IEEE Robotics and Automation Magazine, and Biological Cybernetics. He has been the organizer of 7 international conferences (BioADIT2004, SAB2004, AMAM2005, BioADIT2006, LATSIS2006, SSRR2016, AMAM2019), and a program committee member of over 50 conferences.
Denis GilletDenis Gillet received the Diploma in Electrical Engineering from the Swiss Federal Institute of Technology in Lausanne (EPFL) in 1988, and the Ph.D. degree in Information Systems also from the EPFL in 1995. During 1992 he was appointed as Research Fellow at the Information Systems Laboratory of Stanford University in the United States. He is currently Maître d'enseignement et de recherche at the EPFL School of Engineering, where he leads the React research group. His current research interests include Technologies Enhanced Learning (TEL), Human Computer Interaction (HCI), Human Devices Interaction (HDI) and Optimal Coordination of Complex and Distributed Systems. Denis Gillet is affiliated at EPFL with the Center for Intelligent Systems and the Center for Digital Education.
Philippe MüllhauptExpertise
Nonlinear Control (Geometry and Algebra)Classical DynamicsRoboticsStatistics
Mission
Provide rigorous technical and scientific training in nonlinear control, classical mechanics, and statistical theory
Current Work
Research and teaching in the fields of control theory, statistics, dynamical systems, and general mechanics.
Philippe Mullhaupt received his Diplôme d Education Ing�nieur | Electricit� 1993 – 1993 EPFL DEA | Automatique et Traitement du Signal 199
Christophe SalzmannExpertise
Real-time Internet ServicesReal-time controlQuality of Service and Bandwidth adaptationLabVIEW
Education PhD | Remote experimentation, Network 2005 – 2005 EPFL Directed by Denis Gillet MS. Degree | Computer Science 1999 – 1999 University of Florida Directed by Prof. H. Latchman
Teaching & PhD Past EPFL PhD Students as codirector Damien Perritaz, Evgeny Bogdanov, Wissam Halimi Courses Control systems + TP ME
Laurie PorteTeaching & PhD PhD Students James Winston Irawati Tumbokon, Oliver Morais Moura Past EPFL PhD Students as codirector Matteo Fontana, Pedro Andres Molina Cabrera, Arsène Tema Biwole Courses Atomic and radiative processes in plasmas PHYS-762 The course covers atomic structure, collisional-radiative (CR) processes, and spectroscopic techniques. Students learn to critically apply CR models, evaluate spectroscopic tools, and interpret experimental data obtained in different plasmas.
Paolo GermanoFORMATION
Mars 1990 : Engagement au Laboratoire d'électromécanique et de machines électriques (LEME), devenu entre temps le laboratoire d'actionneurs intégrés (LAI), comme assistant puis comme fonctionnaire scientifique.
Janvier 1990 : Diplôme d'ingénieur EPF en microtechnique.
Juillet 1985 : Maturité de type scientifique.
-
-
- EXPERIENCES ET DOMAINES DE COMPETENCES
-
Modélisation et simulation de l'alimentation des moteurs de l'avion Solar Impulse sur la base des résultats de la modélisation par éléments finis (FEM) de la structure magnétique Développement du banc de mesure (mécanique et software) du moteur Solar Impulse (dès mars 2004);
-
Dans le cadre d'un Projet CTI en collaboration avec l'entreprise Medtronic (Projet ColoStim), développement d'un appareil de traitement de la constipation consistant en des électrodes implantées le long du colon et alimentées par induction, à haute fréquence, à l'aide d'une bobine primaire placée autour du thorax du patient (janvier 2006 - mars 2007);
-
Développement du modèle équivalent d'une montre à glace tactile et analyse de l'effet des décharges électrostatiques sur cette montre. Projet CTI en collaboration avec l'entreprise ETA-Swatch Group (avril 2003 à octobre 2004);
-
Développement d'un système de transfert d'énergie pour navettes automotrices de machines d'assemblage. Projet CTI en collaboration avec l'entreprise Montech AG (octobre 2001 à octobre 2002);
-
Développement d'une installation de transfert d'énergie pour des wagonnets de transport de rouleaux pour l'industrie du papier avec l'entreprise Valmet AG (Groupe Metso Paper) (2001);
-
Développement d'un banc de mesure pour actionneurs linéaires dans le cadre d'un mandat avec l'entreprise Sonceboz SA (mars 1998 - juillet 2000);
-
Développement d'une installation de transfert d'énergie pour un convoyeur d'outils dans le cadre d'un mandat avec l'entreprise MCM SpA (Italie) (juillet 1998 avril 1999 et déc. 1999 avril 2000);
-
Développement d'un banc de test pour vibreur électromécanique dans le cadre d'un mandat avec l'entreprise ASULAB SA à Marin (octobre décembre 1999);
-
Développement et responsabilité d'une installation de démonstration d'un Système de transport automatique à transmission d'énergie par induction - Projet Serpentine 2 PSEL (déc. 1996 juin 1999);
-
Développement d'un banc de mesure et d'analyse pour moteurs à courant continu dans le cadre d'un projet d'impulsion RAVEL (sept. 1995 - mars 1997);
-
Développement d'un convertisseur de fréquence à résonance de 2,4 kW pour l'alimentation d'un transformateur sans fer dans le cadre du transfert d'énergie sans contacts Projet Serpentine PSEL (février 94 déc. 1995);
-
Développement d'un banc de mesure pour moteurs pas à pas dans le cadre d'un mandat avec l'entreprise Sonceboz SA (mars 1992 nov. 1995);
-
Développement d'un convertisseur direct de fréquence AC/AC de basse puissance dans le cadre du projet du cur artificiel Suisse (mars 1990 - mars 1992);
-
Suivi d'une vingtaine de projets de semestre et de master EPFL;
-
Divers projets de moindre envergure (alimentations, démonstrateurs, acquisitions de données, micro-informatique, circuits imprimés).
PUBLICATIONS
DOMAINE DU TRANSFERT D'ENERGIE PAR INDUCTION
M. Jufer, L. Cardoletti, B. Arnet, P. Germano, Ch. Koechli, N. Macabray, M. Perrottet, "Dispositif de transmission d'énergie électrique à un véhicule, sans contact, par induction - Projet PSEL N° 16 - Magnéto-glisseur", Rapport de synthèse 1995, EPFL-DE-LEME, Lausanne - Suisse, 18 octobre 1995;
M. Jufer, L. Cardoletti, P. Germano, B. Arnet, M. Perrottet, N. Macabrey, "Induction Contactless Energy Transmission System for an Electric Vehicle", ICEM96, International Conference on Electrical Machines, Vigo, Sept. 10-12, 1996, Vol II, pp. 343-347;
P. Germano, M. Jufer, "Contactless power transmission: Frequency tuning by a maximum power tracking method", EPE '97, 7th European Conference on power electronics and applications, Trondheim, Sept. 8-10, 1997, Vol IV, pp. 693-697;
M. Jufer, L. Cardoletti, P. Germano, B. Arnet, M. Perrottet, Swiss Federal Institute of Techno-logy, DE-LEME, 1015 Lausanne, Switzer-land, "Inductively powered automatic vehicles - Ser-pen-tine", EVS-15 '98, 15th International Electric Vehicle Symposium and Exhibition, Brussel, Belgium, Sept. 29 - Oct. 3, 1998, pp. 403-404;
P. Germano, Nicolas Macabrey, M. Jufer, Swiss Federal Institute of Technology, DE-LEME, 1015 Lausanne, Switzerland, "Contactless Power Transmission: Linear Positioning of the Moving Element", EPE '99, 8th European Conference on Power Electronics and Applications, Lausanne, 7-9 September, 1999, Art Nb 685;
P. Germano, M. Jufer, L. Cardoletti, B. Arnet, Ch. Koechli, N. Macabray, M. Perrottet, "Système de transport automatique à transmission d'énergie par induction. - Projet PSEL N° 115", Rapport final 1999, EPFL-DE-LEME, Lausanne - Suisse, 31 août 1999;
P. Germano, I. Stefanini, W. Montella, L. Cardoletti, Y. Perriard, "Système de transfert d'énergie pour navette de machines d'assemblage Projet CTI n° 5780.1 KTS", Rapport final, EPF Lausanne-LAI, Suisse, mars 2004;
I. Stefanini, P. Germano, L. Cardoletti, W. Montella, Y. Perriard, "Inductive Charge System for Assembly Plant Shuttles", CD-ROM, EPE 2003, Toulouse, (France), 2-4 Septembre 2003;
P. Germano, I. Stefanini, Y. Perrirad, "Stimulation colique pour le traitement des troubles de la motilité Projet ColoStim Projet CTI n° 7362.2 LSPP-LS", Rapport final, EPF Lausanne-LAI, Suisse, mai 2007.
DOMAINES DES BANCS DE MESURE - MESURES
P. Germano, "Système automatique de mesure", Rapport technique vol. I & II, EPF-Lausanne, 1995;
P. Germano, Ch. Kuert, "Banc de mesures automatisé pour entraînements électriques", Présentation et mode d'emploi, EPF-Lausanne, 1997;
P. Germano, Ch. Kuert, M. Jufer, Swiss Federal Institute of Technology, DE-LEME, 1015 Lausanne, Switzerland, "Automated test bench for electric drives: Modular layout of soft- and hardware", EPE '99, 8th European Conference on Power Electronics and Applications, Lausanne, 7-9 September, 1999, Art Nb 683;
Y. Perriard, P. Germano, I. Verettaz, "Banc de test pour vibreur électromécanique", Rapport technique, EPF-Lausanne, janvier 2000;
P. Germano, Ch. Kuert, M. Jufer, Swiss Federal Institute of Technology, DE-LEME, 1015 Lausanne, Switzerland, "DSP controlled automated Test Bench for linear Actuators Design and Choices", EPE 2001, 9th European Conference on Power Electronics and Applications, Graz, 27-29 August, 2001, Art Nb 709;
P. Germano, M. Crivii, D. Demarco, Y. Perriard, Swiss Federal Instutute of Technology, LAI, 1015 Lausanne, Switzerland & L. Paratte, R. Marquis, Service Unit RD, ETA SA (Swatch Group), 2540 Granges, Switzerland, "Analysis and Modeling of Electrostatic Discharge in a Tactile Glass Featured Watch", IAS 2004, 39th Annual Meeting, Seattle, WA, USA, October 3-7, 2004;
P. Germano, M. Crivii, D. Demarco, Y. Perriard, Swiss Federal Instutute of Technology, LAI, 1015 Lausanne, Switzerland & L. Paratte, R. Marquis, Service Unit RD, ETA SA (Swatch Group), 2540 Granges, Switzerland, "Analysis and Modeling of Electrostatic Discharge in a Tactile Glass Featured Watch", IEEE Transaction on Industry Applications, Volume 43, Issue 4, July-aug. 2007, Page(s): 1091-1098; Yoan René Cyrille CivetTeaching & PhD PhD Students Simon Holzer Past EPFL PhD Students as codirector Dan Shi, Jasha Poliakine, Jonathan Chavanne, Quentin Philippe Mario De Menech Courses Electrotechnics I MICRO-100 The course covers the basics of electrical circuits composed of linear components, in direct current (DC) operation. A series of transforming methods are studied. At the end of the semester, alternate current (AC) systems are treated (complex numbers). Many examples and demos illustrate the course.
Yves PerriardYves Perriard was born in Lausanne in 1965. He received the M. Sc. in Microengineering from the Swiss Federal Institute of Technology - Lausanne (EPFL) in 1989 and the Ph D. degree in 1992. Co-founder of Micro-Beam SA, he was CEO of this company involved in high precision electric drive. Senior lecturer from 1998 and professor since 2003, he is currently director of Laboratory of Integrated Actuators. His research interests are in the field of new actuator design and associated electronic devices. In 2009, he is appointed Vice-Director of the Microengineering Institute in Neuchâtel until 2011. In 2013 the Federal Council has named him the the CTI commission in Bern. In 2014 he is appointed guest professor at Zhejiang University in China. In 2017, the lab is granted by the Werner Siemens Foundation of an amount of 12 millions CHF in order to set up a new Center for Artificial Muscules. Since 2018, he is Expert with Innosuisse, the new Swiss Innovation Agency. http://scholar.google.com/citations?hl=fr&user=V2onuO8AAAAJ https://actu.epfl.ch/news/a-12-million-franc-donation-to-create-a-center-for/ Mohamed BouriDr. Mohamed Bouri is a group leader of Rehabilitation and Assistive Robotics in LSRO and lecturer of Robotics and Industrial Robotics. He graduated in Electrical Engineering in 1992 and obtained his PhD degree in 1997 in Industrial Automation at INSA LYON, France. Since 1997, he is at EPFL and is mainly active in the field of robot control, automation and robot design for medical and industrial applications. He is the head of Rehabilitation and Assistive Robotics group since 2005 and has strong references with the development of robotic devices for lower limb rehabilitation : The MotionMaker and WalkTrainer commercialzed by the company Swortec. His ongoing research currently focuses on the development of exoskeletons and the associated control strategies. His main current projects are TWIICE, a lower limb exoskeleton for people with paraplegia, AUTONOMYO, a walk assistance exoskeleton for people with muscle weakness, and the HiBSO, a hip orthosis for elderly.
