Mediaspace scheduled maintenance: Aug 25, 2026 07:00 - 12:00 AM. During this time, videos will be temporarily unavailable. Check status updates.

Concept

Nyquist stability criterion

Related publications (26)

Stability Analysis of Input-Series/Output-Parallel Solid-State Transformers Equipped with Second-Order Harmonic Active Power Filters

Drazen Dujic, Andrea Cervone, Tianyu Wei

Solid-State Transformers with Input-Series/Output-Parallel configuration offer a convenient solution for AC/DC conversion due to their scalability and modularity. In this configuration, each module experiences a second-order harmonic ripple caused by local ...

2024

Data-Driven Control Synthesis using Koopman Operator: A Robust Approach

Alireza Karimi, Nathan Russell Powell, Mert Eyuboglu

This paper proposes a data-driven control design method for nonlinear systems that builds upon the Koopman operator framework. In particular, the Koopman operator is used to lift the nonlinear dynamics to a higher-dimensional space where the so-called obse ...

2024

Advancing high-throughput combinatorial aging studies of hybrid perovskite thin films via precise automated characterization methods and machine learning assisted analysis

Christian Michael Wolff, Austin George Kuba

To optimize material stability, automated high-throughput workflows are of increasing interest. However, many of those workflows either employ synthesis techniques not suitable for large-area depositions or are carried out in ambient conditions, which limi ...

Royal Society of Chemistry2024

A 1-GS/s 6-8-b Cryo-CMOS SAR ADC for Quantum Computing

Edoardo Charbon

This article presents a two-times interleaved, loop-unrolled SAR analog-to-digital converter (ADC) operational from 300 down to 4.2 K. The 6-8-bit resolution and the sampling speed up to 1 GS/s are targeted at digitizing the multi-channel frequency-multipl ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2023

A 3D-Printed Functional Mems Accelerometer

Luis Guillermo Villanueva Torrijo, Damien Maillard

3D printing of MEMS devices could enable the cost-efficient production of custom-designed and complex 3D MEMS for prototyping and for low-volume applications. In this work, we present the first micro 3D-printed functional MEMS accelerometers using two-phot ...

IEEE2023

Vlasov description of the beam response to noise in the presence of wakefields in high-energy synchrotrons: beam transfer function, diffusion, and loss of Landau damping

Xavier Buffat, Sondre Vik Furuseth

Noise can have severe impacts on particle beams in high-energy synchrotrons. In particular, it has recently been discovered that noise combined with wakefields can cause a diffusion that leads to a loss of Landau damping after a latency. Such instabilities ...

SPRINGER HEIDELBERG2022

A combined Control by Interconnection—Model Predictive Control design for constrained Port-Hamiltonian systems

Anna Ngoc Minh Trang Vu

This paper proposes a Control by Interconnection design, for a class of constrained Port-Hamiltonian systems, which is based on an associated Model Predictive Control optimization problem. This associated optimization problem allows to consider both state ...

2022

Data-driven Power Electronic Converter Control Design in Power System Applications

Seyed Sohail Madani

In recent years, power systems have evolved in physical and cyber-physical layers. In the physical layer, the changes are motivated by environmental concerns resulting in the integration of new types of generation/demand/storage into the grid. These integr ...

EPFL2022

Exploiting Marginal Stability in Slow-Fast Quasilinear Dynamical Systems

Alessia Ferraro

The accurate investigation of many geophysical phenomena via direct numerical simulations is computationally not possible nowadays due to the huge range of spatial and temporal scales to be resolved. Therefore advances in this field rely on the development ...

EPFL2022

Stabilization of city-scale road traffic networks via macroscopic fundamental diagram-based model predictive perimeter control

Nikolaos Geroliminis, Isik Ilber Sirmatel

Traffic control for large-scale urban road networks remains a challenging problem. Aggregated dynamical models of city-scale traffic, based on the macroscopic fundamental diagram (MFD), enable development of model-based perimeter control methods. Involving ...

2021

Effect of illumination and applied potential on the electrochemical impedance spectra in triple cation (FA/MA/Cs) 3D and 2D/3D perovskite solar cells

Mohammad Khaja Nazeeruddin, Sanghyun Paek

Even though there has been numerous works performed based on electrochemical impedance spectroscopy (EIS) of perovskite solar cells (PSCs), however, many aspects of the obtained EI spectra are yet to be fully grasped. Moreover, the change of these spectra ...

ELSEVIER SCIENCE SA2021

Hierarchical Control of Islanded Microgrids with Flexible Structures

Pulkit Nahata

The primary objective of this doctoral thesis is the design and development of hierarchical control schemes for the overall operation and control of Islanded mGs (ImGs) with flexible structuresâ or, with no reference topologies. The control methodologies ...

EPFL2021

A Distributed Luenberger Observer for Linear State Feedback Systems With Quantized and Rate-Limited Communications

Colin Neil Jones, Ye Pu, Andrea Alessandretti, Francisco Fernandes Castro Rego

This article addresses the problem of simultaneous distributed state estimation, and control of linear systems with linear state feedback, subjected to process, and measurement noise, under the constraints of quantized, and rate-limited network data transm ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2021

An 8-Bit 800 MS/s Loop-Unrolled SAR ADC With Common-Mode Adaptive Background Offset Calibration in 28 nm FDSOI

Yusuf Leblebici, Firat Çelik, Ayça Akkaya

This paper presents a low-power single-channel 8-bit loop-unrolled (LU) successive approximation register (SAR) analog-to-digital-converter (ADC) with a novel common-mode adaptive background comparator offset calibration scheme. LU-SAR ADCs use multiple co ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2021

Low Noise Clock Generation: Modeling, Analysis and Implementation

Duygu Kostak

The aim of this thesis is to implement, analyze and improve the selected low noise clock generation and distribution techniques for ADC implementations. The thesis is divided into two parts. The first part focuses on the sampling phase generation and distr ...

EPFL2021

Nonlinear Transient Stability Analysis of Phased-Locked Loop Based Grid-Following Voltage Source Converters Using Lyapunov’s Direct Method

Alireza Karimi, Behrooz Bahrani

In this paper, using Lyapunov’s stability theorem, the transient stability conditions for a grid-following Voltage Source Converter (VSC) are found. These conditions take into account both the grid specifications and the VSC’s dynamics. The derived conditi ...

2021

High-Speed ADC Design and Optimization for Wireline Links

Ayça Akkaya

The ever-growing global internet traffic has increased demand for higher speed data transmission. As the bandwidth requirements of wireline links increase, extensive digital equalization techniques are required to compensate for the high-frequency channel ...

EPFL2021

Development of Lamb wave resonators in thin film X-cut lithium niobate

Muhammad Faizan

Microelectromechanical systems (MEMS) is among the most revolutionary technologies of 21st century, with the applications ranging from industrial systems to consumer electronics. Using MEMS in battery-powered wireless devices has long been seen as the evol ...

EPFL2021

Frequency stability assessment of modern power systems: Models definition and parameters identification

Mario Paolone, Yihui Zuo

One of the fundamental concerns in the operation of modern power systems is the assessment of their frequency stability in case of inertia-reduction induced by the large share of power electronic interfaced resources. Within this context, the paper propose ...

2020

Stabilization and Performance Improvement of Power-Hardware-in-the-Loop Test Using a Robust Data-Driven Method

Alireza Karimi, Seyed Sohail Madani

Power-Hardware-in-the-Loop (PHIL) setups have gained high importance in validation of the performance of newly developed instruments and devices with low risk and implementation cost. However, the interconnection of a power hardware with a simulated model ...

2022