Mediaspace scheduled maintenance: Aug 25, 2026 07:00 - 12:00 AM. During this time, videos will be temporarily unavailable. Check status updates.

Concept

Working electrode

Related publications (31)

Electrochemical sensors modified with iron oxide nanoparticles/ nanocomposites for voltammetric detection of Pb (II) in water: A review

Sandro Carrara

Permissible limits of Pb 2+ in drinking water are being reduced from 10 mu gL -1 to 5 mu gL -1 , which calls for rapid, and highly reliable detection techniques. Electrochemical sensors have garnered attention in detection of heavy metal ions in environmen ...

Cell Press2024

Membrane electrode assembly simulation of anion exchange membrane water electrolysis

Jan Van Herle, Suhas Nuggehalli Sampathkumar, Khaled Lawand, Zoé Mury

Anion exchange membrane water electrolysis (AEMWE) offers a green hydrogen production method that eliminates the need for platinum group metals (PGM) as electrocatalysts. This study employs a COMSOL (R) 6.0 model to simulate a 1x1 cm(2) Ni fibre - Raney (R ...

Elsevier2024

Carbon based printed electrodes for DEAs: study of pad, inkjet, and stencil printing

Yves Perriard, Yoan René Cyrille Civet, Thomas Guillaume Martinez, Stefania Maria Aliki Konstantinidi, Armando Matthieu Walter, Simon Holzer

Dielectric elastomer actuators (DEAs) have raised interest due to their remarkable capabilities in various applications, such as soft robotics, haptic feedback systems, and biomedical devices. To harness the full potential of DEAs, the choice of the electr ...

Society of Photo-Optical Instrumentation Engineers (SPIE)2024

Quantifying mass transport limitations in a microfluidic CO2 electrolyzer with a gas diffusion cathode

Sophia Haussener, Venu Gopal Agarwal

A gas diffusion electrode (GDE) based CO2 electrolyzer shows enhanced CO2 transport to the catalyst surface, significantly increasing current density compared to traditional planar immersed electrodes. A two-dimensional model for the cathode side of a micr ...

2024

Green hydrogen production using Shewanella oneidensis MR-1 bioanode and cuprous oxide-based photocathode

Michele Morgante

In recent years, many efforts have been made to find alternative renewable energy sources that can ideally replace the use of fossil fuels in all aspects. One of the new emerging energy technologies is the bioelectrochemical system, of which two types are ...

EPFL2024

Additively Manufactured Degradable Piezoelectric Microsystems for Sensing and Actuating

Danick Briand, Luis Guillermo Villanueva Torrijo, Nicolas Francis Fumeaux, Morgan Mc Kay Monroe

The global overabundance of electronic waste and ever-increasing concerns regarding the energy-and material-intensive manufacturing processes associated with traditional electronics are driving the development of solution-processed, degradable electronics. ...

Wiley2023

Simultaneous local sensing of two chemical properties with dual soft probe scanning electrochemical microscopy

Hubert Girault, Andreas Stephan Lesch

A new method for the rapid and economic fabrication of dual soft microelectrodes for Soft-Probe-Scanning electrochemical microscopy (Soft-Probe-SECM) and their use for the simultaneous local detection of locally generated species is presented. The process ...

PERGAMON-ELSEVIER SCIENCE LTD2023

Highly Efficient and Air-Stable Inorganic Perovskite Solar Cells Enabled by Polylactic Acid Modification

Yong Ding

Inorganic perovskite solar cells (PSCs) suffer from serious carrier recombination and open-circuit voltage loss because of surface defects and unfavorable energy level alignment. Herein, a polylactic acid (PLA) modification approach to improve the performa ...

WILEY-V C H VERLAG GMBH2023

Printed degradable piezoelectric microsystems: From ink formulation to device fabrication and characterization

Morgan Mc Kay Monroe

As the world moves further and further into the semiconductor era, the amount of waste generated from electronics ("e-waste") is increasing rapidly and unsustainably. Of particular note, alternatives to lead-based piezoelectric materials must be establishe ...

EPFL2023

Electrode Impact on the Electrical Breakdown of Dielectric Elastomer Thin Films

Herbert Shea, Fabio Beco Albuquerque

Dielectric Elastomer Actuators (DEAs) enable the realization of energy-efficient and compact actuator systems. DEAs operate at the kilovolt range with typically microampere-level currents and hence minimize thermal losses in comparison to low voltage/high ...

MDPI2023

A Needle-Shaped Electrochemical Sensor in Platinum for Robust Monitoring of Anaesthetics

Sandro Carrara

A needle-shaped electrochemical sensor based on platinum electrodes is proposed in this paper. These platinum electrodes provide improved mechanical properties with respect to previous prototypes proposed in literature. This makes them suitable for inserti ...

IEEE2022

Adsorption Behavior of the Coenzyme NADH at the Carbon/ Electrolyte Interface Determined by Neutron Reflectometry

Mary Hannah Wood

The adsorption behavior of beta-nicotinamide adenine dinucleotide (NADH) at the carbon/electrolyte interface has been studied using a combination of neutron reflectometry (NR) and solution depletion isotherms. Coupling the NR technique with an electrochemi ...

2022

Monitoring and understanding Cu catalyst dissolution during CO2 electroreduction

Jan Vávra

Electrochemical reduction of carbon dioxide is a promising approach to decrease the amount of anthropogenic CO2 being released into the atmosphere, provided that a surplus of renewable electrical energy is available. Copper based materials are at the cente ...

EPFL2022

Peeling in electroadhesion soft grippers

Herbert Shea, Vito Cacucciolo

Electroadhesion endows robots with super-human abilities: mechanical geckoes that climb vertical walls and soft grippers that grasp the most delicate objects. Based on electrostatics, the adhesion forces are turned on and off by an electrical signal, promi ...

ELSEVIER2022

Enhanced rate performance of lithium-ion battery anodes using a cobalt-incorporated carbon conductive agent

Xile Hu, Albert Claude Jean-Pierre Daubry

Lithium-ion batteries with enhanced rate performance are of crucial importance for practical applications. Extensive studies on the structural design and surface modification of electrode materials with the aim of improving the rate performance have been r ...

ROYAL SOC CHEMISTRY2022

Extended-gate field-effect transistor with aptamer functionalisation layer for measuring hormone concentration in biofluids and corresponding fabrication method

Mihai Adrian Ionescu, Shokoofeh Sheibani

The present invention concerns a biosensor (1) for sensing stress hormone cortisol concentration in a biofluid (27). The biosensor (1) comprises: an electrical transistor transducer (3) comprising a transistor gate electrode (17); a sensing electrode eleme ...

2022

Lifetime of dielectric elastomer actuators under DC electric fields

Fabio Beco Albuquerque

Dielectric elastomer actuators (DEAs) are interesting soft actuators compared to other actuation technologies owing to large achievable actuation strains, high energy density and fast actuation. However, because DEAs need to be operated under high electric ...

EPFL2022

Piezoelectric suspended microchannel resonators

Damien Maillard

The objective of this PhD thesis is the development of a microfluidic platform for the real-time measurements of the mechanical properties of biological analytes at the single entity level. The systems developed for these purposes consist of piezoelectrica ...

EPFL2022

Beware of your electrodes! How electrode materials and application processes impact the lifetime of slide-ring-material-based DEAs

Herbert Shea

For dielectric elastomer actuators (DEAs) to find more widespread adoption in commercial products, a better understanding of their durability is needed. By determining the different mechanisms contributing to ageing and breakdown in DEAs, new methods for i ...

SPIE-INT SOC OPTICAL ENGINEERING2021

Capacitive sensor to monitor the level of drug inside an injector pen

Sylvain Paul Fernand Joly

Diabete is a disease which is spreading faster than ever, impacting now a larger population. Patients suffering from this disease need the injection of insulin to control extracellular sugar levels. Pharmaceutical companies developed injector pens to allow ...

EPFL2021