Antonin FaesExpertise
Research in Energy Field a) Fuel Cell (SOFC) b) Organic Photovoltaic Cell TEM & SEM imaging and analysis
Mission
Team Leader on PV Modules and Reliability at EPFL PV-Lab
Dr. Antonin Faes is leading the PV Module and Reliability activity at EPFL PV-Lab and Solar Mobility Area Manager at CSEM Sustainable Energy Center. He graduated as materials science engineer at EPFL in Lausanne and got his PhD in 2010 on Solix Oxide Fuel cells. From 2012, he developed the advanced Smart-Wire Connection Technology
Jean-Michel SalleseExpertise
- Modeling of field effect transistors (Multigate FETs, Junctionless FET, HEMT, Field Effect-based Biosensors).- Modeling substrate parasitic currents in integrated circuits.- Simulation of radiation induced soft errors in integrated circuits- High energy particle solid-state sensors.
Mission
The mission of the Electron Device Modeling and Technology group is to develop analytical and numerical models (physics based) of emerging semiconductor devices, with particular emphasis on field effect trans
Julien Alexandre AndresTeaching & PhD Courses Advanced general chemistry CH-160(f) This course aims at the acquisition of essential notions on the structure of matter, chemical equilibria and reactivity. Theoretical teaching and exercise provide the methodology to analyze and solve by reasoning and calculation novel problems of general chemistry. Advanced general chemistry (for SFU) UNIL-160 The aim of this course is to acquire the essential concepts relating to the structure of matter and chemical
Aleksandar AntanasijevicTeaching & PhD PhD Students Camilla Di Giulio, Kiruthika Kumar, Yash Garodia Courses Biological chemistry I BIO-212 Biochemistry is a key discipline for the Life Sciences. Biological Chemistry I and II are two tightly interconnected courses that aim to describe and understand in molecular terms the processes that make life possible. General chemistry for SV CH-100 This course covers essential notions in general chemistry, relative to matter and its structure, equilibriums
Georgios MoschidisTeaching & PhD PhD Students Abraham Gabriel Dorsaz Courses Analysis IV (for EL, GM, MX) MATH-207(c) This course serves as an introduction to the theory of complex analysis, Fourier series and Fourier transforms, the Laplace transform, with applications to the theory of ordinary and partial differential equations. These tools play an integral role in most branches of science and engineering. Differential geometry I - curves and surfaces MATH-213 This course serves as an intr
Simon GuilloudExpertise
My main domains of research are proof assistants and algorithms for logic-related problems.I also have interests in various areas of computer science and mathematics and their applicability in proof systems such as probabilistic proofs, type theory, quantum computing and more.
Expertise
My main domains of research are proof assistants and algorithms for logic-related problems.I also have interests in various areas of computer science and mathematics and their applicability in proof systems such as
Ute KochExpertise
SCIENTIFIC EXPERTISESCurrent Molecular Biology and Cloning, Developmental Biology, Cellular and Molecular Immunology, Lymphocyte Maturation and Lineage Commitment, Thymic Selection, Hematopoietic Stem Cell Biology, Bone Marrow Transplantation, Graft-versus-Host Disease, Skin Transplantation, T Lymphocyte Subset Induction (Th1 - Th2, Cytokine Regulation), Extensive Knowledge in Flow CytometryIT SKILLSMicrosoft-Office: Word, Excel, PowerPoint.File Maker Pro: Database design and management.Flow cytom
Guido HaefeliTeaching & PhD PhD Students Federico Ronchetti, Gauri Napoletano Past EPFL PhD Students as codirector Axel Kuonen, Olivier Göran Girard, Carina Trippl Courses Particle detection PHYS-440 The course will cover the physics of particle detectors. It will introduce the experimental techniques used in nuclear and particle physics. The lecture includes the interaction of particles with matter, scintillators, gas detectors, silicon detectors, detectors for particle ID and photo-detectors.
Mario PaoloneMario Paolone received the M.Sc. (with honors) and the Ph.D. degree in electrical engineering from the University of Bologna, Italy, in 1998 and 2002, respectively. In 2005, he was appointed assistant professor in power systems at the University of Bologna where he was with the Power Systems laboratory until 2011. In 2010, he received the Associate Professor eligibility from the Politecnico di Milano, Italy. Since 2011 he joined the Swiss Federal Institute of Technology, Lausanne, Switzerland, where he is now Full Professor, Chair of the Distributed Electrical Systems laboratory and Head of the Swiss Competence Center for Energy Research (SCCER) FURIES (Future Swiss Electrical infrastructure). He was co-chairperson of the technical programme committees of the 9th edition of the International Conference of Power Systems Transients (IPST 2009) and of the 2016 Power Systems Computation Conference (PSCC 2016). He was chair of the technical programme committee of the 2018 Power Systems Computation Conference (PSCC 2018). In 2013, he was the recipient of the IEEE EMC Society Technical Achievement Award. He was co-author of several papers that received the following awards: best IEEE Transactions on EMC paper award for the year 2017, in 2014 best paper award at the 13th International Conference on Probabilistic Methods Applied to Power Systems, Durham, UK, in 2013 Basil Papadias best paper award at the 2013 IEEE PowerTech, Grenoble, France, in 2008 best paper award at the International Universities Power Engineering Conference (UPEC). He was the founder Editor-in-Chief of the Elsevier journal Sustainable Energy, Grids and Networks and was Associate Editor of the IEEE Transactions on Industrial Informatics. His research interests are in power systems with particular reference to real-time monitoring and operation, power system protections, power systems dynamics and power system transients. Mario Paolone is author or coauthor of over 300 scientific papers published in reviewed journals and international conferences.
François MaréchalPh D. in engineering Chemical process engineer
Researcher and lecturer in the field of computer aided process and energy systems engineering.
Lecturer in the mechanical engineering, electrical engineering and environmental sciences engineering in EPFL.
I'm responsible for the Minor in Energy of EPFL and I'm involved in 3 projects of the Competence Center in Energy and Mobility (2nd generation biofuel, Wood SOFC, and gas turbine development with CO2 mitigation) in which i'm contributing to the energy conversion system design and optimisation.
Short summary of my scientific carrer
After a graduation in chemical engineering from the University of Liège, I have obtained a Ph. D. from the University of Liège in the LASSC laboratory of Prof. Kalitventzeff (former president of the European working party on computer aided process engineering). This laboratory was one of the pioneering laboratory in the field of Computer Aided Process Engineering.
In the group of Professor Kalitventzeff, I have worked on the development and the applications of data reconciliation, process modelling and optimisation techniques in the chemical process industry, my experience ranges from nuclear power stations to chemical plants. In the LASSC, I have been responsible from the developments in the field of rational use of energy in the industry. My first research topic has been the methodological development of process integration techniques, combining the use of pinch based methods and of mathematical programming: e.g. for the design of multiperiod heat exchanger networks or Mixed integer non linear programming techniques for the optimal management of utility systems. Fronted with applications in the industry, my work then mainly concentrated on the optimal integration of utility systems considering not only the energy requirements but the cost of the energy requirements and the energy conversion systems. I developed methods for analysing and integrating the utility system, the steam networks, combustion (including waste fuel), gas turbines or other advanced energy conversion systems (cogeneration, refrigeration and heat). The techniques applied uses operation research tools like mixed integer linear programming and exergy analysis. In order to evaluate the results of the utility integration, a new graphical method for representing the integration of the utility systems has been developed. By the use of MILP techniques, the method developed for the utility integration has been extended to handled site scale problems, to incorporate environmental constraints and reduce the water usage. This method (the Effect Modelling and Optimisation method) has been successfully applied to the chemical plants industry, the pulp and paper industry and the power plant. Instead of focusing on academic problems, I mainly developed my research based on industrial applications that lead to valuable and applicable patented results. Recently the methods developed have been extended to realise the thermoeconomic optimisation of integrated systems like fuel cells. My present R&D work concerns the application of multi-objective optimisation strategies in the design of processes and integrated energy conversion systems.
Since 2001, Im working in the Industrial Energy Systems Laboratory (LENI) of Ecole Polytechnique fédérale de Lausanne (EPFL) where Im leading the R&D activities in the field of Computer Aided Analysis and Design of Industrial Energy Systems with a major focus on sustainable energy conversion system development using thermo-economic optimisation methodologies. A part from the application and the development of process integration techniques, that remains my major field of expertise, the applications concern :
Rational use of water and energy in Industrial processes and industrial production sites : projects with NESTLE, EDF, VEOLIA and Borregaard (pulp and paper).Energy conversion and process design : biofuels from waste biomass (with GASNAT, EGO and PSI), water dessalination and waste water treatment plant (VEOLIA), power plant design (ALSTOM), Energy conversion from geothermal sources (BFE). Integrated energy systems in urban areas : together with SCANE and SIG (GE) and IEA annexe 42 for micro-cogeneration systems.
I as well contributed to the definition of the 2000 Watt society and to studies concerning the emergence of green technologies on the market in the frame of the Alliance for Global Sustainability.
Anja SkrivervikAnja Skrivervik obtained her electrical engineering degree from Ecole Polytechnique Fédérale de Lausanne in 1986, and her PhD from the same institution in 1992, for which she received the Latsis award. After a stay at the University of Rennes as an invited Research Fellow and two years in the industry, she returned part time to EPFL as an Assistant Professor in 1996, and is now a Professeur Titulaire at this institution, where she is the head of the Microwave and Antenna Group. Her research activities include electrically small antennas, antennas in biological media, periodic structures, reflect- and tranmitarrays, and numerical techniques for electromagnetics. She is author or co-author of more than 200 peer reviewed scientific publications. Her teaching activities include courses on microwaves and antennas, and she has course at Bachelor, Master and PhD levels. She was director of the EE section form 1996-2000, and is currently the director of the EE doctoral school at EPFL.
She is very active in European collaboration and European projects. She was the chairperson of the Swiss URSI until 2012, is a Board member of the European School on Antennas and is frequently requested to review research programs and centers in Europe. She is a member of the board of directors of the European Association on Antennas and Propagation (EurAAP) since 2017.
