Sofiane SarniTeaching & PhD Courses Large-scale data science for real-world data COM-490 This hands-on course covers tools and methods used by data scientists, from researching solutions to scaling prototypes on Spark clusters. Students engage with the full data engineering and data science pipeline, from data acquisition to extracting insights, applied to real-world problems.
Clément Pit-ClaudelTeaching & PhD PhD Students Yawen Guan, Kacper Feliks Korban, Can Cebeci, Alexandre Pinazza, Shardul Chiplunkar Courses Interactive Theorem Proving Project CS-642 A project-focused introduction to interactive theorem proving. Interactive theorem proving CS-428 A hands-on introduction to interactive theorem proving, computer-checked mathematics, compiler verification, proofs as programs, dependent types, and proof automation.Come learn how to write computer-checked proofs an
Raphaël Alain MunozTeaching & PhD Courses Artistic Practices - Interactivity HUM-322 The aim of this course is to design a video game in Unity in which walking is at the heart of the experience. Drawing on references, prototypes and the environmental narrative, students will create an immersive journey in which each step activates elements of the story.
Enrique Corres SojoTeaching & PhD Courses TRC LC3 Research Platform Fribourg PENS-308 The UE TRC-LC3 Research Platform Fribourg will develop prototypes of structural elements in textile reinforced concrete (TRC) and Limestone Calcined Clay Cement (LC3) concrete that allow the continuation of the TRC prototype pavilion started at EPFL in 2019. The UE will take place in EPFL Fribourg.
Tomás KrálTeaching & PhD Courses Design industriel - projet expérimental HUM-327 Practical teaching that allows acquiring the bases of industrial design by confronting the students with the creation of an object. Industrial Design - Initiation project HUM-225 The course consists in practical teaching that allows acquiring the bases of industrial design by confronting the students with the creation of an object. Industrial design - form, function and materials HUM-306 Pr
Pierre DillenbourgA former teacher in elementary school, Pierre Dillenbourg graduated in educational science (University of Mons, Belgium). He started his research on learning technologies in 1984. In 1986, he has been on of the first in the world to apply machine learning to develop a self-improving teaching system. He obtained a PhD in computer science from the University of Lancaster (UK), in the domain of artificial intelligence applications for education. He has been assistant professor at the University of Geneva. He joined EPFL in 2002. He has been the director of Center for Research and Support on Learning and its Technologies, then academic director of Center for Digital Education, which implements the MOOC strategy of EPFL (over 2 million registrations). He is full professor in learning technologies in the School of Computer & Communication Sciences, where he is the head of the CHILI Lab: "Computer-Human Interaction for Learning & Instruction ». He is the director of the leading house DUAL-T, which develops technologies for dual vocational education systems (carpenters, florists,...). With EPFL colleagues, he launched in 2017 the Swiss EdTech Collider, an incubator with 80 start-ups in learning technologies. He (co-)-founded 4 start-ups, does consulting missions in the corporate world and joined the board of several companies or institutions. In 2018, he co-founded LEARN, the EPFL Center of Learning Sciences that brings together the local initiatives in educational innovation. He is a fellow of the International Society for Learning Sciences. He currently is the Associate Vice-President for Education at EPFL.
Patricia GuaitaExpertise
pedagogy of makingdrawing as an actionmultidisciplinary projectsdesign methodologies in 1:1 fabricationexperiential learning processesknowledge transfer with the Global Southdiversity and care
Patricia Guaita is an architect, researcher, and educator with expertise in drawing as an action and social and sustainable research projects. Her work focus on design methodologies, which incorporate drawing by hand, 1:1 fabrication, spatial and tectonic analysis, and the development of construction protoco
David Carlos Fernandez-Ordoñez HernandezExpertise
Construction.Structures.Concrete.Prefabrication.History of Construction.
Teaching & PhD Courses Design of precast concrete structures CIVIL-414 The course deals with the design of precast reinforced concrete structures, both for bridges and for buildings. The course is focused in learning by projects supplemented by some lectures by the teachers.The students will work in groups to design a precast structure. Drawing structures CIVIL-126 The Drawing Structures I wil
Jack Richard GreenwoodExpertise
Superconducting magnets for fusion energy (LTS and HTS).Superconducting magnet technology prototyping and testing.High-field measurements on superconductors with currents up to 100 kA.Critical currents in superconducting materials: flux pinning, Josephson junctions, and percolation theory. Beyond (p,q) models.Superconductors under strain.
Current Work
I joined the Swiss Plasma Centre's Superconductivity Group (SPC-SG) in 2023. The group is part of EPFL and it is physically located at the Paul Sche
Denis GilletDenis Gillet received the Diploma in Electrical Engineering from the Swiss Federal Institute of Technology in Lausanne (EPFL) in 1988, and the Ph.D. degree in Information Systems also from the EPFL in 1995. During 1992 he was appointed as Research Fellow at the Information Systems Laboratory of Stanford University in the United States. He is currently Maître d'enseignement et de recherche at the EPFL School of Engineering, where he leads the React research group. His current research interests include Technologies Enhanced Learning (TEL), Human Computer Interaction (HCI), Human Devices Interaction (HDI) and Optimal Coordination of Complex and Distributed Systems. Denis Gillet is affiliated at EPFL with the Center for Intelligent Systems and the Center for Digital Education.
Roland John TormeyI am a sociologist and learning scientist researching and teaching on engineering education. I'm particularly focused on the roles of emotion and self-regulation in engineering teaching and learning. My profile is accessible here.
Ian SmithPhD, Cambridge University, 1982 Interests 1 Active shape control for structures for deployment and where serviceability criteria governs 2 Biomimetic structures (learning, self-diagnosis, self-repair) 3 Infrastructure management support through structural identification 4 Advanced computer-aided engineering applications of stochastic optimization and search, multi-criteria analysis, system uncertainties (measurement and modelling), multi-modal approaches (combining statistics with behavior models) More details : see https://www.epfl.ch/labs/imac/research/iansmith/ Olivier VerscheureSWISS DATA SCIENCE CENTER
Housed at both EPFL and ETH Zurich, the newly created Swiss Data Science Center (SDSC) will address the fragmentation within today's data and analytics landscapes. The SDSC will be composed of a distributed multi-disciplinary team of data scientists and experts in domains including personalized health and personalized medicine, transportation, earth and environmental science, social science and digital humanities, and economics. The center aims to federate data providers, data and
Touradj EbrahimiTouradj EBRAHIMI received his M.Sc. and Ph.D., both in Electrical Engineering, from the Swiss Federal Institute of Technology (EPFL), Lausanne, Switzerland, in 1989 and 1992 respectively. In 1993, he was a research engineer at the Corporate Research Laboratories of Sony Corporation in Tokyo, where he conducted research on advanced video compression techniques for storage applications. In 1994, he served as a research consultant at AT&T Bell Laboratories working on very low bitrate video coding. He is currently Professor at EPFL heading its Multimedia Signal Processing Group. He is also the Convenor of JPEG standardization Committee. He was also adjunct Professor with the Center of Quantifiable Quality of Service at Norwegian University of Science and Technology (NTNU)from 2008 to 2012.
Prof. Ebrahimi has been the recipient of various distinctions and awards, such as the IEEE and Swiss national ASE award, the SNF-PROFILE grant for advanced researchers, Four ISO-Certificates for key contributions to MPEG-4 and JPEG 2000, and the best paper award of IEEE Trans. on Consumer Electronics . He became a Fellow of the international society for optical engineering (SPIE) in 2003. Prof. Ebrahimi has initiated more than two dozen National, European and International cooperation projects with leading companies and research institutes around the world. He is a co-founder of Genista SA, a high-tech start-up company in the field of multimedia quality metrics. In 2002, he founded Emitall SA, start-up active in the area of media security and surveillance. In 2005, he founded EMITALL Surveillance SA, a start-up active in the field of privacy and protection. He is or has been associate Editor with various IEEE, SPIE, and EURASIP journals, such as IEEE Signal Processing Magazine, IEEE Trans. on Image Processing, IEEE Trans. on Multimedia, EURASIP Image Communication Journal, EURASIP Journal of Applied Signal Processing, SPIE Optical Engineering Magazine. Prof. Ebrahimi is a member of Scientific Advisory Board of various start-up and established companies in the general field of Information Technology. He has served as Scientific Expert and Evaluator for Research Funding Agencies such as those of European Commission, The Greek Ministry of Development, The Austrian National Foundation for Scientific Research, The Portuguese Science Foundation, as well as a number of Venture Capital Companies active in the field of Information Technologies and Communication Systems. His research interests include still, moving, and 3D image processing and coding, visual information security (rights protection, watermarking, authentication, data integrity, steganography), new media, and human computer interfaces (smart vision, brain computer interface).
He is the author or the co-author of more than 200 research publications, and holds 14 patents. Prof. Ebrahimi is a member of IEEE, SPIE, ACM and IS&T.
See the URL below for more details:
http://mmspl.epfl.ch Arnaud BertschTeaching & PhD PhD Students Tao Zhang, Pol Torres Vila, Nicolas Bruno Minazzo Past EPFL PhD Students as codirector Joan Teixidor, Clémentine Sophie Sarah Lipp, Nicolas Grégoire Maïno, Jiande Zhou, Jongeon Park Courses Advanced microfabrication practicals MICRO-373 This TP allows for in-depth training on advanced micro and nanofabrication methods in a clean-room environment for selected applications, gain deeper knowledge in MEMS/NEMS processes, work in a small group together with PhD stude
Yves PerriardYves Perriard was born in Lausanne in 1965. He received the M. Sc. in Microengineering from the Swiss Federal Institute of Technology - Lausanne (EPFL) in 1989 and the Ph D. degree in 1992. Co-founder of Micro-Beam SA, he was CEO of this company involved in high precision electric drive. Senior lecturer from 1998 and professor since 2003, he is currently director of Laboratory of Integrated Actuators. His research interests are in the field of new actuator design and associated electronic devices. In 2009, he is appointed Vice-Director of the Microengineering Institute in Neuchâtel until 2011. In 2013 the Federal Council has named him the the CTI commission in Bern. In 2014 he is appointed guest professor at Zhejiang University in China. In 2017, the lab is granted by the Werner Siemens Foundation of an amount of 12 millions CHF in order to set up a new Center for Artificial Muscules. Since 2018, he is Expert with Innosuisse, the new Swiss Innovation Agency. http://scholar.google.com/citations?hl=fr&user=V2onuO8AAAAJ https://actu.epfl.ch/news/a-12-million-franc-donation-to-create-a-center-for/ Francesco MondadaDr. Mondada received his M.Sc. in micro-engineering in 1991 and his Doctoral degree in 1997 at EPFL. During his thesis he co-founded the company K-Team, being both CEO and president of the company for about 5 years. He is one of the three main developers of the Khepera robot, considered as a standard in bio-inspired robotics and used by more than 1,000 universities and research centers worldwide. Fully back in research in 2000 and after a short period at CALTECH, he participated to the SWARM-BOTS project as the main developer of the s-bot robot platform, which was ranked on position 39 in the list of The 50 Best Robots Ever (fiction or real) by the Wired Journal in 2006. The SWARM-BOTS project was selected as FET-IST success story by the EU commission. He is author of more than 100 papers in the field of bio-inspired robotics and system level robot design. He is co-editor of several international conference proceedings. In November 2005 he received the EPFL Latsis University prize for his contributions to bio-inspired robotics. In 2011 he received the "Crédit Suisse Award for Best Teaching" from EPFL and in 2012 the "polysphère" award from the students as best teacher in the school of engineering. His interests include the development of innovative mechatronic solutions for mobile and modular robots, the creation of know-how for future embedded applications, and making robot platforms more accessible for education, research, and industrial development.
Babak FalsafiBabak is a Professor in the School of Computer and Communication Sciences and the founding director of the EcoCloud, an industrial/academic consortium at EPFL investigating scalable data-centric technologies. He has made numerous contributions to computer system design and evaluation including a scalable multiprocessor architecture which was prototyped by Sun Microsystems (now Oracle), snoop filters and memory streaming technologies that are incorporated into IBM BlueGene/P and Q and ARM cores, and computer system performance evaluation methodologies that have been in use by AMD, HP and Google PerKit . He has shown that hardware memory consistency models are neither necessary (in the 90's) nor sufficient (a decade later) to achieve high performance in multiprocessor systems. These results eventually led to fence speculation in modern microprocessors. His latest work on workload-optimized server processors laid the foundation for the first generation of Cavium ARM server CPUs, ThunderX. He is a recipient of an NSF CAREER award, IBM Faculty Partnership Awards, and an Alfred P. Sloan Research Fellowship. He is a fellow of IEEE and ACM.
