Charlotte GrossiordTeaching & PhD PhD Students Maxwell Zachary Wallace Bergström, Julie Anne Botzas-Coluni, Cross Jacob Heintzelman, Léo César Bernard Jacquat, Céline Joanna Sijlmans Past EPFL PhD Students Eugénie Mas, Laura Mekarni, Janisse Deluigi, Thibaut Juillard Courses Applied ecology ENV-422 The course will provide the ecological systems knowledge needed to question applied sustainability solutions. We willcritically assess the complexity of current environmental issues, illustrating basic ecological
Berend SmitBerend Smit received an MSc in Chemical Engineering in 1987 and an MSc in Physics both from the Technical University in Delft (the Netherlands). He received in 1990 cum laude PhD in Chemistry from Utrecht University (the Netherlands). He was a (senior) Research Physicists at Shell Research from 1988-1997, Professor of Computational Chemistry at the University of Amsterdam (the Netherlands) 1997-2007.
In 2004 Berend Smit was elected Director of the European Center of Atomic and Molecular Computations (CECAM) Lyon France. Since 2007 he is Professor of Chemical Engineering and Chemistry at U.C. Berkeley and Faculty Chemist at Materials Sciences Division, Lawrence Berkeley National Laboratory. Since 2014 he has been director of the Energy Center at EPFL.
Albert RenkenTeaching & PhD Past EPFL PhD Students Serge Maeder, Jacques Membrez, Stéphane Porchet, Philippe Menoud, Brigitta Frank, Harvey Randall, Wolfgang Zimmerer, Frédéric Van Vyve, Serge Golay, Jianzhong Yang, Stéphane Dubuis, Philippe Warnery, Anders Nattorp, Christian Spühler, Laurent Cavin, Miriam Lorenzi, Bastien Monnerat, André Rouge, Olivier Wolfrath, Peter Stahl, Ralf Maurer, Konrad Geissler, Volker Höller, Benoît Louis, Pierre Reuse, Fabio Rainone, Eric Joannet, Chrystèle Horny Past EPFL PhD Students as co
Anna Fontcuberta i Morral2014 Associate Professor at the Institut des Matériaux, EPFL
2008 Assistant Professor Tenure Track at the Institut des Matériaux, EPFL
2009 Habilitation in Physics, Technische Universität München
2005-2010 Marie Curie Excellence Grant Team Leader at Walter Schottky Institut, Technische Universität München, on leave from Centre National de la Recherche Scientifique (CNRS, France)
2004-2005 Visiting Scientist at the California Institute of Technology, on leave from CNRS; Senior Scientist and co-founder of Aonex Technologies (a startup company for large area layer transfer of InP and Ge on foreign substrates for the main application of multi-junction solar cells)
2003 Permanent Research Fellow at CNRS, Ecole Polytechnique, France
2001-2002 Postdoctoral Scholar at the California Institute of Technology
Study of wafer bonding and hydrogen-induced exfoliation processes for integration of mismatched materials in views of photovoltaic applications
Sponsor: Professor Harry A. Atwater
1998-2001 PhD in Materials Science, Ecole Polytechnique
Study of polymorphous silicon: growth mechanisms, optical and structural properties. Application to Solar Cells and Thin Film Transistors
Advisor: Pere Roca i Cabarrocas
1997-1998 Diplôme dEtudes Approfondis (D.E.A.) in Materials Science at Université Paris XI, France .
1993-1997 BA in Physics at Universitat de Barcelona
François MaréchalPh D. in engineering Chemical process engineer
Researcher and lecturer in the field of computer aided process and energy systems engineering.
Lecturer in the mechanical engineering, electrical engineering and environmental sciences engineering in EPFL.
I'm responsible for the Minor in Energy of EPFL and I'm involved in 3 projects of the Competence Center in Energy and Mobility (2nd generation biofuel, Wood SOFC, and gas turbine development with CO2 mitigation) in which i'm contributing to the energy conversion system design and optimisation.
Short summary of my scientific carrer
After a graduation in chemical engineering from the University of Liège, I have obtained a Ph. D. from the University of Liège in the LASSC laboratory of Prof. Kalitventzeff (former president of the European working party on computer aided process engineering). This laboratory was one of the pioneering laboratory in the field of Computer Aided Process Engineering.
In the group of Professor Kalitventzeff, I have worked on the development and the applications of data reconciliation, process modelling and optimisation techniques in the chemical process industry, my experience ranges from nuclear power stations to chemical plants. In the LASSC, I have been responsible from the developments in the field of rational use of energy in the industry. My first research topic has been the methodological development of process integration techniques, combining the use of pinch based methods and of mathematical programming: e.g. for the design of multiperiod heat exchanger networks or Mixed integer non linear programming techniques for the optimal management of utility systems. Fronted with applications in the industry, my work then mainly concentrated on the optimal integration of utility systems considering not only the energy requirements but the cost of the energy requirements and the energy conversion systems. I developed methods for analysing and integrating the utility system, the steam networks, combustion (including waste fuel), gas turbines or other advanced energy conversion systems (cogeneration, refrigeration and heat). The techniques applied uses operation research tools like mixed integer linear programming and exergy analysis. In order to evaluate the results of the utility integration, a new graphical method for representing the integration of the utility systems has been developed. By the use of MILP techniques, the method developed for the utility integration has been extended to handled site scale problems, to incorporate environmental constraints and reduce the water usage. This method (the Effect Modelling and Optimisation method) has been successfully applied to the chemical plants industry, the pulp and paper industry and the power plant. Instead of focusing on academic problems, I mainly developed my research based on industrial applications that lead to valuable and applicable patented results. Recently the methods developed have been extended to realise the thermoeconomic optimisation of integrated systems like fuel cells. My present R&D work concerns the application of multi-objective optimisation strategies in the design of processes and integrated energy conversion systems.
Since 2001, Im working in the Industrial Energy Systems Laboratory (LENI) of Ecole Polytechnique fédérale de Lausanne (EPFL) where Im leading the R&D activities in the field of Computer Aided Analysis and Design of Industrial Energy Systems with a major focus on sustainable energy conversion system development using thermo-economic optimisation methodologies. A part from the application and the development of process integration techniques, that remains my major field of expertise, the applications concern :
Rational use of water and energy in Industrial processes and industrial production sites : projects with NESTLE, EDF, VEOLIA and Borregaard (pulp and paper).Energy conversion and process design : biofuels from waste biomass (with GASNAT, EGO and PSI), water dessalination and waste water treatment plant (VEOLIA), power plant design (ALSTOM), Energy conversion from geothermal sources (BFE). Integrated energy systems in urban areas : together with SCANE and SIG (GE) and IEA annexe 42 for micro-cogeneration systems.
I as well contributed to the definition of the 2000 Watt society and to studies concerning the emergence of green technologies on the market in the frame of the Alliance for Global Sustainability.
Laura PiveteauTeaching & PhD Courses Basic and advanced NMR - Level 1 A (EPFL) CH-601(x) Basic theoretical and experimental aspects of NMR will be taught. Students will be familarized with modern NMR spectrometers. Basic and advanced NMR - Level 1 B (Sion) CH-601(y) Basic theoretical and experimental aspects of NMR. Students will be familarized with modern NMR spectrometers. Basic and advanced NMR - Level 2 (EPFL) CH-703 The goal is to give a sound theoretical and practi
Andreas ZüttelTeaching & PhD PhD Students Boyu Ouyang, Wai Kwan Liu, Guillaume Bérenger Rod, Aleksandar Mihaylov Mikov, Rui Li, Akhil Varma Penmathsa Past EPFL PhD Students Robin Tobias Andreas Mutschler, Kun Zhao, Loris Giovanni Lombardo, Mo Li, Jie Zhang, Youngdon Ko, Cedric David Koolen, Thi Ha My Pham, Zohreh Akbari, Yasemen Kuddusi Courses Thermodynamics of energy conversion and storage ChE-414 The course is an introduction to the energy conversion. It focusseson the thermodynamics of the engines a
Mounir Driss MensiTeaching & PhD Courses Advanced Solid State and Surface Characterization CH-633 State-of-the-art surface/thin film characterization methods of polycrystalline/nano/amorphous materials. Selected topics from X-ray scattering (SAXS/GISAXS, PDF, GIWAXS, HRXRD), electronic and optical spectroscopy (XPS, AES, SERS, TERS), scanning probe and electron microscopy (STM, AFM, HRTEM, SEM). Characterization of Materials 2025 MSE-716 This course introduces materials characterization techni
Stéphanie LacourStéphanie P. Lacour holds the Bertarelli Foundation Chair in Neuroprosthetic Technology in the School of Engineering at EPFL and leads the Laboratory for Soft Bioelectronic Interfaces. She received her PhD in Electrical Engineering from INSA de Lyon, France, and completed postdoctoral research at Princeton University and the University of Cambridge. She is the recipient of the 2006 MIT TR35, a University Research Fellowship of the Royal Society, European Research Council ERC Starting and POC Grants, and a SNSF-ERC Consolidator Grant. She was elected a 2015 Young Global Leader by the World Economic Forum.