Concept

Thermal design power

Related publications (29)

Is the powersave governor really saving power?

David Atienza Alonso, Darong Huang, Luis Maria Costero Valero

A frequency scaling governor is critical for the performance management of cloud servers, as it enhances energy efficiency and helps to control operational temperatures, thereby ensuring system reliability. However, our in-depth analysis of the application ...

2024

On-Chip Fully Reconfigurable Artificial Neural Network in 16 nm FinFET for Positron Emission Tomography

Edoardo Charbon, Claudio Bruschini, Emanuele Ripiccini, Andrada Alexandra Muntean

Smarty is a fully-reconfigurable on-chip feed-forward artificial neural network (ANN) with ten integrated time-to-digital converters (TDCs) designed in a 16 nm FinFET CMOS technology node. The integration of TDCs together with an ANN aims to reduce system ...

Ieee-Inst Electrical Electronics Engineers Inc2024

Multi-Ported GC-eDRAM Bitcell with Dynamic Port Configuration and Refresh Mechanism

Adam Shmuel Teman, Robert Giterman

Embedded memories occupy an increasingly dominant part of the area and power budgets of modern systems-on-chips (SoCs). Multi-ported embedded memories, commonly used by media SoCs and graphical processing units, occupy even more area and consume higher pow ...

MDPI2024

Thermal Design of a Medium Voltage Modular Multilevel Converter Cell

Drazen Dujic, Yanick Patrick Frei

This paper presents the cooling concept for a medium voltage modular multilevel converter cell. To optimize power density, the metallic enclosure is used to dissipate the heat generated by semiconductor losses, while maintaining maximum temperatures below ...

New York2023

Pipelined Architecture for Soft-Decision Iterative Projection Aggregation Decoding for RM Codes

Alexios Konstantinos Balatsoukas Stimming, Yuqing Ren

The recently proposed recursive projection-aggregation (RPA) decoding algorithm for Reed-Muller codes has received significant attention as it provides near-ML decoding performance at reasonable complexity for short codes. However, its complicated structur ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2023

Intelligent RF System for Ultra Low Power Spectrum Sensing with Machine Learning

Naci Pekçokgüler

The crowdedness of the RF spectrum constitutes problems in communication, however it also accommodates large amount of useful information. This information can be used to determine existing signals and operating contexts. However, spectrum condition varies ...

EPFL2024

Front-End Circuits for Radiation-Hard Monolithic CMOS Sensors targeting High-Energy Physics Applications

Francesco Piro

Monolithic pixel sensors integrate the sensor matrix and readout in the same silicon die, and therefore present several advantages over the more largely used hybrid detectors in high-energy physics. They offer an easier detector assembly, lower cost, lower ...

EPFL2023

Object-oriented modelling of advanced computer cooling solutions

David Atienza Alonso

Modern computing systems are so energy- intensive to make efficient cooling vital for their operation. This is giving rise to a variety of innovative cooling solutions based on a mix of traditional and new techniques. The design and engineering of these so ...

Elsevier2023

Integrated Electronics for Deep Implants to Remotely Monitor Hemodynamics

Mustafa Besirli

The integration of technology in the medical field has greatly improved accuracy in diagnoses, thus leading to more effective treatments. Wearable and implantable medical devices offer great potential for remote patient monitoring, particularly for heart f ...

EPFL2023

A review of time reversal-based methods applied to fault location in power networks

Farhad Rachidi-Haeri, Mario Paolone, Reza Razzaghi, Zhaoyang Wang

Electromagnetic time reversal (EMTR)-based methods have been applied to the problem of fault location in power networks since 2012. Over the past decade, considerable theoretical investigations have led to a continuous improvement of the EMTR method in ter ...

2023

A massively scalable Time-to-Digital Converter with a PLL-free calibration system in a commercial 130 nm process

Edoardo Charbon

A 33.6 ps LSB Time-to-Digital converter was designed in 130 nm BiCMOS technology. The core of the converter is a differential 9-stage ring oscillator, based on a multi-path architecture. A novel version of this design is proposed, along with an analytical ...

IOP Publishing Ltd2021

Adaptive Body Biasing in Strong Body Factor Technologies

Thomas Christoph Müller

With the advent of intelligent sensor nodes in everyday life, low power aspects of system design become more and more important. Adaptive body biasing is a promising methodology to achieve dynamic adaptation of the tradeoff between performance and energy b ...

EPFL2021

Integration of MEMS in Silicon Photonics

Alain Yuji Takabayashi

Like integrated electronics, integrated photonics such as Silicon Photonics benefit from increased device-density on a single chip. Silicon is an excellent material for integrated photonics because its high refractive index allows devices to be made small, ...

EPFL2021

A Low Power 35 GHz HEMT Oscillator for Electron Spin Resonance Spectroscopy

Giovanni Boero, Nergiz Sahin Solmaz, Alessandro Valentino Matheoud

This paper presents a low power microwave oscillator designed as sensor for electron spin resonance (ESR) spectroscopy. Low power consumption is necessary for low temperature operation. Additionally, lower power consumption allows for a lower microwave mag ...

IEEE2021

Analysis of the effects of thermal anchors on the reduction of the parasitic load to the EU-DEMO TF coils

Kamil Sedlák

The design of the superconducting magnet system of the EU-DEMO tokamak reached the end of the preconceptual design phase, and a careful investigation of the parasitic heat load from the room-temperature environment is needed. A possible route for the paras ...

2021

Hardware-in-the-Loop Characterization of Source-Affected Output Characteristics of Cascaded H-Bridge Converter

Drazen Dujic, Marko Petkovic

Recent trends in power system design such as an increasing share of renewable energy sources and integration of power electronics equipment for medium voltage applications are creating different subsystem interactions that require proper investigation, und ...

2021

A New Generation of Thermal Energy Benchmarks for University Buildings

Kavan Javanroodi

In 2008, the Chartered Institution of Building Services Engineers (CIBSE TM46 UC) presented an annual-fixed thermal energy benchmark of 240 kWh/m(2)/yr for university campus (UC) buildings as an attempt to reduce energy consumption in public buildings. How ...

2020

Multi-Objective Management of Multiprocessor Systems: From Heuristics to Reinforcement Learning

Arman Iranfar

In my thesis, I reveal several already-existing and emerging challenges in multi-objective management of multiprocessor systems, and address them through novel solutions, from heuristics to RL, depending on the complexity of the problem. Conventional multi ...

EPFL2020

Thermomechanical behavior of underground energy infrastructures

Jacopo Zannin

The employment of geostructures as structural supports and as heat exchangers represent an effective, renewable and sustainable way to satisfy thermal needs of the built environment. The structural support of conventional geotechnical structures is coupled ...

EPFL2020

Thermal design and full-scale thermal response test on Energy Walls

Lyesse Laloui, Alessio Ferrari, Jacopo Zannin

Energy geostructures (EG) are an innovative technology in the sustainable energy agenda that can be used to satisfy the heating and cooling needs of the built environment. EGs include several types of geostructures such as piles, walls, tunnels, shafts, se ...

ES3 Web of Conferences2019