Harm-Anton KlokExpertise
Polymer design at nanoscaleBiologically-inspired polymers
Mission
Research at the Laboratory of Polymer (LP) focuses on the development of novel advanced polymeric materials with potential applications in optics, electronics or medicine. The philosophy is that precise control over nanoscale structure is an important prerequisite to tailor polymer properties. To this end, a “bottom-up” approach is followed, which starts with designing a new material at the molecular level, in order to be able to pr
Véronique MichaudBackground:
1994 Habilitation à diriger des recherches ( INPG, France)
1991 PhD in Materials Engineering ( MIT, USA)
1987 Ingénieur Civil des Mines ( Ecole des Mines de Paris, France)
Activities:
Since January 2018: Associate Dean of Engineering, in charge of Education
June 2012-Dec.2017: Head of the Materials Science and Engineering Section
Since April 2017: Associate Professor at EPFL
2009-2017 : Professeur Titulaire at EPFL
1997-2009: Researcher at EPFL
1994-1997 : Chef de Travaux au laboratoire MSS-MAT, Ecole Centrale Paris (France)
1991-1994 : Post-doctoral research associate, MIT (USA)
Author of about 300 publications of which 140 in peer-reviewed journals
Pierre-Etienne BourbanBackground 1990 Ingénieur en science des matériaux 1993 PhD in materials science Activities 1993-1994 Research at the Center for Composite Materials, University of Delaware, USA (ccm.udel.edu), SNSF grant Since 1994 Research and teaching at EPFL, Composites, (LTC, LPAC) 1995-1999 Coordination Swiss Priority Program on Materials research: 2.2: Composites Since 1998 Biocomposites 2004-2009 Direction of the EPFL Transdisciplinary programme in Sport and Rehabilitation 2005-2008 Member of the EPFL Vice-Presidency for Innovation and Valorisation and direction a.i.EPFL-LTC Since 2016 Direction Discovery Learning Labs Materials/Bioengineering and Engineering
Jeremy LuterbacherExpertise
Biomass conversion Heterogeneous catalysis
See: https://www.epfl.ch/labs/lpdc/luterbacher/ Education Postdoc | Chemical Engineering 2014 – 2014 Univsersity of Wisconsin-Madison PhD | Chemical Engineering 2012 – 2012 Cornell University Master | Chemical Engineering 2010 – 2010 Cornell University Master | Chemical Engineering 2007 – 2007 �cole Polytechnique F�d�rale de Lausanne Bachelor | Chemistry and Ch Yves LeterrierYves Leterrier joined EPFL in 1993 and is a faculty member of the Materials Institute. He is a senior scientist and lecturer in the Laboratory for Processing of Advanced Composites (LPAC, previously Laboratory of Composite and Polymer Technology, LTC). Activities
2000-2005: Foundation and Chair of the Korea-Switzerland joint symposia on materials and micro-technologies2004-2008: Board member of FLEXIDIS (the European flexible display consortium) 2004-2009: Group leader on lightweight materials for Solar ImpulseSince 2008: Board member of the French Adhesion SocietySince 2000: President of the EPFL Materials Science Library commissionSince 2012: Editorial board member, Applied Surface ScienceSince 2014: Associate Editor, Frontiers in MaterialsSince 2021: Coordinator of the EPFL Minor on 'Engineering for Sustainability'
Background
1987: MS in materials science and solid state physics (INPL, France) 1991: PhD in materials science (Ecole des Mines, INPL, France) 1992: Research Associate, National Institute of Standards and Technology (NIST, USA)
Paul Joseph DysonPaul Dyson joined the Institute of Chemical Sciences and Engineering at the EPFL in 2002 where he heads the Laboratory of Organometallic and Medicinal Chemistry and between 2008 and 2016 chaired the Institute. He has won several prizes including the Werner Prize of the Swiss Chemical Society in 2004, the Award for Outstanding Achievements in Bioorganometallic Chemistry in 2010, the Centennial Luigi Sacconi Medal of the Italian Chemical Society in 2011, the Bioinorganic Chemistry Award of the Royal Society of Chemistry in 2015, the European Sustainable Chemistry Award of the European Chemical Society in 2018 and the Green Chemistry Award from the Royal Society of Chemistry in 2020. He is also a Clarivate Highly Cited Researcher and has an H-index >110 (web of science and google scholar). He was elected a Fellow of the Royal Society of Chemistry in 2010, a Fellow of the European Academy of Science in 2019 and a life-long fellow of the American Association for the Advancement of Science in 2020. Over the years he has held visiting professorships at the University of Bourgogne, University of Pierre et Marie Curie, University of Vienna, University of Rome Tor Vergara, Chimie Paristech and Shangai Jiao Tong University.Since 2016 he has been Member of the Council of the Division of Mathematics, Natural and Engineering Sciences at the Swiss National Science Foundation.Between 2016-2021 he has been Member of the Council of the Division of Mathematics, Natural and Engineering Sciences at the Swiss National Science Foundation. In 2021 he was appointed Dean of the Faculty of Basic Sciences.
Esther AmstadEsther Amstad studied material science at ETH in Zurich. She also carried out her PhD thesis at the same University under the supervision of Prof. Marcus Textor; for her thesis, she worked on the surface modification and steric stabilization of oxide nanoparticles. As a postdoctoral fellow, she joined the experimental condensed soft matter group of David A. Weitz at Harvard University where she used droplet based microfluidics to assemble different types of functional micro- and nanomaterials. In addition, she developped new microfluidic devices that enable the production of very small, airborne drops as well as devices that produce highly monodisperse emulsion drops at a very high throughput. In June 2014, Esther joined the material science department (IMX) of EPFL where she is leading the Soft Materials Laboratory (SMAL).
Dominique PiolettiDominique Pioletti received his Master in Physics from the Swiss Federal Institute of Technology Lausanne (EPFL) in 1992. He pursued his education in the same Institution and obtained his PhD in biomechanics in 1997. He developed original constitutive laws taking into account viscoelasticity in large deformations. Then he spent two years at UCSD as post-doc fellow acquiring know-how in cell and molecular biology. He was interested in particular to gene expression of bone cells in contact to orthopedic implant. In April 2006, Dominique Pioletti was appointed Assistant Professor tenure-track at the EPFL and is director of the Laboratory of Biomechanical Orthopedics. His research topics include biomechanics and tissue engineering of musculo-skeletal tissues; mechano-transduction in bone; development of orthopedic implant as drug delivery system. Since 2013, he has been promoted to the rank of Associate Professor.
Francesco StellacciFrancesco Stellacci graduated in Materials Engineering at the Politecnico di Milano in 1998 with a thesis on photochromic polymers with Prof. Giuseppe Zerbi and Mariacarla Gallazzi. In 1999 he moved to the Chemistry Department of the University of Arizona for as a post-doc in the group of Joe Perry in close collaboration with the group of Seth Marder. In 2002 he moved to the Department of Materials Science and Engineering at the Massachusetts Institute of Technology as an assistant professor. He was then promoted to associate without (2006) and with tenure (2009). In 2010 he moved to the Institute of Materials at EPFL as a full Professor. He holds the Alcan EP Chair. Francesco was one of the recipients of the Technology Review TR35 "35 Innovator under 35" award in 2005, and the Popular Science Magazine "Brilliant 10" award in 2007. He has been a Packard Fellow starting 2005.
Daniel GörlTeaching & PhD Courses Organic chemistry MSE-211 This course provides a basic foundation in organicchemistry and polymer chemistry, including chemical nomenclature of organic compounds and polymers, an understanding of chemical structures, chemical reaction mechanisms, as well as methods of organic and polymer synthesis. Polymer science MSE-362 Polymer science + TP MSE-360 Introduction to polymer physics and the link between chemical structure and macroscopic
Thierry MeyerThierry Meyer received in 1986 a diploma degree (MSc) in chemical engineering from the Swiss Federal Institute of Technology at Lausanne (EPFL). He was awarded in 1989 a PhD at EPFL for his thesis on micromixing in highly viscous polymeric media. He joined the Institute of Chemical Engineering from 1989 till 1993 as senior scientist in the field of polymerization reactions. In 1994 he joined Ciba-Geigy SA in the pigment division as successively development chemist, head of development a.i. and finally production manager for high performance pigments. Returning to the Institute of Chemical Engineering at EPFL in Lausanne by the end of 1998, he was nominated maître denseignement et de recherche (MER) for leading a new research group in the field of polymers and supercritical fluids, and teaching to chemists, chemical engineers and material sciences, disciplines as process development, introduction to chemical engineering, polymer and organic chemistry at master and bachelor program. In 2005 he owned the responsibility of the Occupational Health and Safety of the school of basic sciences on top of his research activities dealing with risk management and supercritical fluids. He is presently teaching introduction to chemical engineering at bachelor level, risk management at master level and specific courses on safety and engineering risk management in continuing education. He acts also as consultant and expert in risk assessment and chemical engineering matters by the ICC (International Chamber of Commerce) of the World Business Organization, by several consultancy companies and by major and SMEs chemical industries. Thierry Meyer is currently member of several international associations of the European Federation of Chemical Engineering, American institution of chemical engineering, American chemical society and senior member of the American Institute of Chemical Engineers. He was elected chairman of the European Working Party on Polymer Reaction Engineering from 2001 till 2006. He his currently the Swiss academic member of the European Working Party on Loss Prevention and Safety Promotion as well as of the European Working Party on Education. He is member of several editorial boards: Chemical Engineering Research and Design, Macromolecular Reaction Engineering, Chemical Engineering and Technology, Journal of Chemical Health and Safety.
César PulgarinProf. C. Pulgarin is Chemist from Lausanne University, Master in environmental chemistry from Geneva University, Ph D in synthesis bio-inspired of natural substances from Neuchâtel University. During his education he carried out several industrial trainings.
Since March 1989, he has been working at the EPFL where he is leader of the Advanced Oxidation Processes Group (GPAO) active in the development chemical, photochemical, electrochemical, ultrasonic processes, their coupling between them and with biological systems to degrade chemical and microbiological pollutants in water and air. He has an H index of 40 and he is the world most cited author in 1) TiO2 photo-assisted bacterial inactivation in water and 2) Coupling of photochemical and biological processes for pollutant degradation. He has been involved in ten African, South American and European international research projects. He has been Swiss representative in COST program 540.
Anastasios VassilopoulosPERSONAL INFORMATION Name : Anastasios P. Vassilopoulos email : anastasios.vassilopoulos@epfl.ch Tel: 41 21 6936393 Fax: 41 21 6936240 SUMMARY OF QUALIFICATIONS 1995: Dipl. Mechanical Engineer, University of Patras, Greece 2001: Dr Mechanical Engineer, Doctoral thesis in fatigue of composite materials from the Dept. Mechanical Engineering and Aeronautics, University of Patras, Greece CURRENT POSITION Senior Scientist (MER), Composite Construction Laboaratory (CCLab), EPFL PREVIOUS POSITIONS 2006-2012 Research and Teaching Associate, Composite Construction Laboaratory (CCLab), EPFL 2002-2006 Assisstant Professor, Technological Educational Institute (TEI) of Patras, Greece 2001-2003 Post-doctoral Research associate, (Part-time) Dept. Mechanical Engineering and Aeronautics of the University of Patras, Greece. EDUCATION 1990 - 1995 Graduate student, Dept. Mechanical Engineering and Aeronautics, University of Patras, Greece October 1994-January 1995 Dept. Mechanical Engineering, University of Bristol, U.K. (In the frame of Erasmus project for the final year thesis, under the supervision of Prof. R. D. Adams) 1995 - 2000 Research assistant, Dept. Mechanical Engineering and Aeronautics, University of Patras. LANGUAGES English, Greek, French COMMUNITY ACTIVITIES (Member of) Council of the European Society of Composite Materials (ESCM) Council of the European Society of Experimental Mechanics (EuraSEM) The European Structural Integrity Society (ESIS) The European Energy Research Alliance (EERA, JP WIND) The Technical Chamber of Greece (TCG) The Hellenic Association of Mechanical & Electrical Engineers SCIENTIFIC-RESEARCH INTERESTS Experimental methods for the study of the behavior of composite materials under static and fatigue loading Development of analytical methods for the study of the behavior of FRP composite materials under variable amplitude complex stress states Development of fatigue life prediction methodologies for composite materials and structures Design of constructions with composite materials Suong NguyenSu was born and raised in Da Nang, Vietnam. She moved to the United States in 2013 to pursue her undergraduate studies at the University of Mississippi. In 2022, she completed her PhD in Organic Chemistry in the laboratory of Prof. Robert Knowles at Princeton University. For her dissertation, she developed light-driven methods to (1) construct aliphatic C&N bonds through olefin hydroamidation, (2) convert low-value biomass into high-value chemical feedstocks, (3) chemically recycle plastic wastes and develo
Alex DommannTeaching & PhD Courses CCMX Advanced Course - Advanced X-ray Diffraction Methods for Coatings: strain, defects and deformation analysis of thin films MSE-628 After introducing thin film and HR-XRD characterisation methods, theory and limitations are discussed, including examples and how the film structure influences its characteristics. Protocols are presented for establishing reproducible and reliable measurements, and for interpreting their results. X-Ray Analysis for thin films
Jürgen BruggerI am a Professor of Microengineering and co-affiliated to Materials Science. Before joining EPFL I was at the MESA Research Institute of Nanotechnology at the University of Twente in the Netherlands, at the IBM Zurich Research Laboratory, and at the Hitachi Central Research Laboratory, in Tokyo, Japan. I received a Master in Physical-Electronics and a PhD degree from Neuchâtel University, Switzerland. Research in my laboratory focuses on various aspects of MEMS and Nanotechnology. My group contributes to the field at the fundamental level as well as in technological development, as demonstrated by the start-ups that spun off from the lab. In our research, key competences are in micro/nanofabrication, additive micro-manufacturing, new materials for MEMS, increasingly for wearable and biomedical applications. Together with my students and colleagues we published over 200 peer-refereed papers and I had the pleasure to supervise over 25 PhD students. Former students and postdocs have been successful in receiving awards and starting their own scientific careers. I am honoured for the appointment in 2016 as Fellow of the IEEE “For contributions to micro and nano manufacturing technology”. In 2017 my lab was awarded an ERC AdvG in the field of advanced micro-manufacturing.
