Emad OveisiDr Emad Oveisi is a senior scientist at the Interdisciplinary Centre for Electron Microscopy (CIME), EPFL.
Emad received a BSc in Metallurgy and Materials Engineering (2005) and an MSc in Materials Science (2008) both from the University of Tehran (Iran). He graduated with a PhD in Materials Science and Engineering at EPFL in 2014 for a thesis on the "Three-Dimensional STEM Imaging of Dislocations" under the direction of Prof. Cécile Hébert. The PhD thesis at the Electron Spectrometry and Microscopy Laboratory (LSME), served as an introduction to many of the advanced microscopy techniques that have proven to be a platform for his research career. A post-doctoral research at the centre for electron microscopy gave him the opportunity to peruse a cutting-edge research on one of the most modern aberration-corrected transmission electron microscopes.Since the inauguration of the Energypolis campus of EPFL in Sion, he has been the manager and reference scientist of the electron microscopy platform of EPFL-Valais, working with 9 research groups and more than 200 researchers. In addition to this core responsibility, he provides advanced microscopy consulting and service to EPFL scientists and assist their research to the highest level possible.
Emad Oveisi’s research focuses on the application and development of novel electron microscopy techniques, with emphasis on 3D imaging of crystal defects, as well as the precision measurement of materials properties using aberration-corrected S/TEM. In 2018, he received the prestigious Microscopy Innovation Award for inventing “Single-shot three-dimensional electron imaging”, a novel technique that enables 3D imaging of in situ dynamics.
In 2016 Emad was elected as an interim representative for the scientific staff ("corps intermédiaire") to the Council of the Institute of Chemistry (ISIC). Since 2019, he is a member of EPFL Teachers’ Council (CCE) and has been elected as one of its four bureau members. This role allows him to be exposed to new ideas and pedagogical challenges, as well being involved in discussions with the Vice Presidency of Education (VPE) and other teaching organisations for defining teaching strategies at the EPFL.
Francesco StellacciFrancesco Stellacci graduated in Materials Engineering at the Politecnico di Milano in 1998 with a thesis on photochromic polymers with Prof. Giuseppe Zerbi and Mariacarla Gallazzi. In 1999 he moved to the Chemistry Department of the University of Arizona for as a post-doc in the group of Joe Perry in close collaboration with the group of Seth Marder. In 2002 he moved to the Department of Materials Science and Engineering at the Massachusetts Institute of Technology as an assistant professor. He was then promoted to associate without (2006) and with tenure (2009). In 2010 he moved to the Institute of Materials at EPFL as a full Professor. He holds the Alcan EP Chair. Francesco was one of the recipients of the Technology Review TR35 "35 Innovator under 35" award in 2005, and the Popular Science Magazine "Brilliant 10" award in 2007. He has been a Packard Fellow starting 2005.
Caglar AtamanTeaching & PhD Courses Optical MEMS and micro-optics MICRO-605 Micro-optics and Optical MEMS let us shape light with unmatched precision and speed. From fiber networks to LIDAR, they drive innovation in compact systems. MICRO 605 takes you from core principles to breakthrough applications in this fast-evolving field.
Xile HuXile Hu was born in 1978 in Putian, southeastern China. He entered the Peking University in Beijing in 1996. Besides learning too little chemistry, his biggest regret in the college was not able to correct his southern accent in Mandarin. After graduated from PKU, he went to the United States and began his doctoral studies at the University of California, San Diego. In December 2004, he finished with a Ph.D. in chemistry and some fond memories of the beautiful city of San Diego. He then moved to the Los Angeles area and become a postdoctoral scholar at the California Institute of Technology. There he enjoyed numerous stimulating scientific (and other) discussions with friends and colleagues. He also made plenty of friends outside the campus and was a frequent in many local Chinese restaurants. In 2007, after two pleasant visits to Switzerland, he decided to move across the continent one more time and join the faculty of the École Polytechnique Fédérale de Lausanne (EPFL). He now directs the Laboratory of Inorganic Synthesis and Catalysis and is interested in developing chemistry for synthesis, energy and sustainability.
Roland John TormeyI am a sociologist and learning scientist researching and teaching on engineering education. I'm particularly focused on the roles of emotion and self-regulation in engineering teaching and learning. My profile is accessible here.
Roger HerschRoger D. Hersch is professor of Computer Science and head of the Peripheral Systems Laboratory at EPFL. He received his engineering degree from ETHZ in 1975, worked in industry from 1975 to 1980, and obtained his PhD degree from EPFL in 1985. He directed the widely known
Visible Human Web Server project
, which offers a number of services for the visualization of human anatomy.
His current research focuses on color reproduction, spectral color prediction models, moiré imaging, and visual document security. Recent achievements include the PhotoProtect technology, which incorporates text as chromatic differences in order to protect identity photographs (Swiss driving license), microstructure imaging, which is used by railways companies (SNCF, RENFE) and festival organizers (Paleo) to print tickets at home and the band moire imaging technology for the protection of security documents.
Jürgen BruggerI am a Professor of Microengineering and co-affiliated to Materials Science. Before joining EPFL I was at the MESA Research Institute of Nanotechnology at the University of Twente in the Netherlands, at the IBM Zurich Research Laboratory, and at the Hitachi Central Research Laboratory, in Tokyo, Japan. I received a Master in Physical-Electronics and a PhD degree from Neuchâtel University, Switzerland. Research in my laboratory focuses on various aspects of MEMS and Nanotechnology. My group contributes to the field at the fundamental level as well as in technological development, as demonstrated by the start-ups that spun off from the lab. In our research, key competences are in micro/nanofabrication, additive micro-manufacturing, new materials for MEMS, increasingly for wearable and biomedical applications. Together with my students and colleagues we published over 200 peer-refereed papers and I had the pleasure to supervise over 25 PhD students. Former students and postdocs have been successful in receiving awards and starting their own scientific careers. I am honoured for the appointment in 2016 as Fellow of the IEEE “For contributions to micro and nano manufacturing technology”. In 2017 my lab was awarded an ERC AdvG in the field of advanced micro-manufacturing.
Vivek SubramanianTeaching & PhD PhD Students Giovanni Ruffolo, Giada Romano, Sanjay Manoharan, Kyle Haas, Claude Dahan, Biruktait Ayele Lemecho, Yagmur Ceren Alatas, Tugçe Delipinar Past EPFL PhD Students Amin Hodaei, Mustafa Mohieldin Fadlelmula Fadlelseed Past EPFL PhD Students as codirector Mohammad Jafarpour Courses Organic and printed electronics MICRO-505 This course addresses the implementation of organic and printed electronics technologies using large area manufacturing techniques. It will provide
Esther AmstadEsther Amstad studied material science at ETH in Zurich. She also carried out her PhD thesis at the same University under the supervision of Prof. Marcus Textor; for her thesis, she worked on the surface modification and steric stabilization of oxide nanoparticles. As a postdoctoral fellow, she joined the experimental condensed soft matter group of David A. Weitz at Harvard University where she used droplet based microfluidics to assemble different types of functional micro- and nanomaterials. In addition, she developped new microfluidic devices that enable the production of very small, airborne drops as well as devices that produce highly monodisperse emulsion drops at a very high throughput. In June 2014, Esther joined the material science department (IMX) of EPFL where she is leading the Soft Materials Laboratory (SMAL).
Siara Ruth IsaacExpertise
Higher education teaching and learningExperiential and hands-on learningTransversal skills for engineering studentsEpistemic cognition
Education Ph.D., Educational Research | 2021 – 2021 Lancaster University, UK Directed by Paul Ashwin M.Sc., Bio-Organic Chemistry | 2008 – 2008 McGill University, Montreal Directed by Masad Damha B.Sc., Honours Chemistry | 2001 – 2001 McGill University, Montrea
Agathe Claire Estelle MignonEducation PhD | Architecture 2019 – 2019 Ecole Polytechnique Fédérale – Lausanne, Suisse MSc | Architecture 2014 – 2014 Ecole Polytechnique Fédérale – Lausanne, Suisse Directed by Dietz Dieter ; Gargiani Roberto
Teaching & PhD Courses Digital models AR-114 The objective of the digital modeling course is to learn and manipulate the basic functions of the Rhinoceros 3D assisted design software through the development of a sim
Claudia Rebeca Binder SignerClaudia R. Binder, a Swiss, Canadian and Colombian citizen, was born in Montreal and spent most of her childhood in Switzerland and Colombia. She studied at ETH Zurich from 1985 to 1996, earning a degree in biochemistry and then a PhD in environmental sciences. After conducting her post-doctoral research at the University of Maryland in the US from 1996 to 1998, she returned to Switzerland and took a position as a senior research scientist at ETH Zurich, studying the interaction between human and environmental systems at the Institute for Natural and Social Science Interface. In 2006, Binder joined the University of Zurich as an assistant professor in the Department of Geography, and in 2009 moved to the University of Graz in Austria where she served as a full professor of systems science. In 2011, she took a position at the University of Munich’s Department of Geography as a full professor of human-environment relations.
Binder joined EPFL in March 2016 and set up the Laboratory for Human-Environment Relations in Urban Systems (HERUS) at ENAC; she also holds the La Mobilière Chair on Urban Ecology and Sustainable Living.
Her research involves analyzing, modelling and assessing the transition of urban systems towards sustainability. She looks in particular at how we can better understand the dynamics of urban metabolism, what characterizes a sustainable city, and what drives and hinders transformation processes. She does so by combining knowledge from social, natural and data science. Her research focuses on food, energy, and sustainable living and transport in urban systems.
In Switzerland, Binder was appointed to the Research Council, Programs Division of the Swiss National Science Foundation (SNSF) in 2016 and serves on the Steering Committee of the SNSF’s National Research Program 71, “Managing Energy Consumption” and the Swiss Competence Centers for Energy Research (SCCER). She is also a member of the Steering Board on Sustainability Research for the Swiss Academies of Arts and Sciences. In 2019, she was elected as a member of the University Council of the University of Munich (LMU).
At EPFL, Binder is the academic director of Design Together, a cross-disciplinary teaching initiative. She was appointed to the management team of the Energy Center in 2018 and as head of the working group on EPFL’s energy and sustainability strategy in 2019.
