Jean-Marie Drezet1992-1996: PhD work at Laboratoire de Métallurgie Physique under the supervision of Prof. Michel Rappaz (cf : http://library.epfl.ch/theses/?display=detail&nr=1509) 1997-2000: EMPACT project (European Modelling Programme for Aluminium Casting Technologies) 2001-2004: VIRCAST project (European Virtual Casting) 2005-2006: Study of the sawing process of rolling sheet al. ingots (Alcan Fonds) 2005-2006: WelAIR project (Welding of Airframes, EADS) 2005-2008: study of the electron beam welding of Cu-Cr-Zr alloys (CEA, France) 2006-2008: study of the laser beam welding of Al-Li alloys (EADS, France) 2008-2011: co-supervision with Prof. A. Nussbaumer of the PhD work of C. Acevedo on the influence of residual stresses on the fatigue design of tubular welded joints, http://library.epfl.ch/theses/?nr=5056 2007-2010: co-supervision with Prof. J.-F. Molinari of the PhD work of K. Shahim on the Normal Pressure Hydrocephalus (S. Momjian, HU-Genève et R. Sinkus, ESPCI-Paris), http://library.epfl.ch/theses/?nr=5191 2008-2012: co-supervision with Prof. M. Rappaz of the PhD work of M. Sistaninia on the simulation of solidification cracking using granular models (CCMX-MERU project) 2010-2014: supervision with Prof. M. Rappaz of the PhD work of N. Chobaut on the modelling of stresses during quenching of thick heat treatable aluminium parts (CCMX-MERU project) 2011-2015: supervision with Prof. H. Van Swygenhoven-Moens of the PhD work of P. Schloth on precipitation during quenching of thick heat treatable aluminium parts (CCMX-MERU project) Sébastien VaucherTeaching & PhD Past EPFL PhD Students as codirector Thomas Alexandre, Kwanghoon Choi Courses Materials selection MSE-474 Propose suitable materials, design, and production routes depending on different performance criteria using a computer based software approach. The course is based on Prof. Mike Ashby's well known "Ashby plots" comparing different material properties (mechanical, thermal, chemical, etc.).
Pierre-Etienne BourbanBackground 1990 Ingénieur en science des matériaux 1993 PhD in materials science Activities 1993-1994 Research at the Center for Composite Materials, University of Delaware, USA (ccm.udel.edu), SNSF grant Since 1994 Research and teaching at EPFL, Composites, (LTC, LPAC) 1995-1999 Coordination Swiss Priority Program on Materials research: 2.2: Composites Since 1998 Biocomposites 2004-2009 Direction of the EPFL Transdisciplinary programme in Sport and Rehabilitation 2005-2008 Member of the EPFL Vice-Presidency for Innovation and Valorisation and direction a.i.EPFL-LTC Since 2016 Direction Discovery Learning Labs Materials/Bioengineering and Engineering
Xavier MaederTeaching & PhD PhD Students Samuel Felix Bojarski, Kamila Elzbieta Hamulka, Philipp Konrad Clewie Kroeker Past EPFL PhD Students as codirector Nicolò Maria Della Ventura Courses Advanced Microscopy for Materials MSE-677 This course provides an overview of advanced materials characterization techniques, focusing on modern Scanning Electron Microscopy (SEM) combined with Focused Ion Beam (FIB) systems (dual-beam), as well as Transmission Electron Microscopy (TEM) and Atom Probe Tomography (A
Jeremy LuterbacherExpertise
Biomass conversion Heterogeneous catalysis
See: https://www.epfl.ch/labs/lpdc/luterbacher/ Education Postdoc | Chemical Engineering 2014 – 2014 Univsersity of Wisconsin-Madison PhD | Chemical Engineering 2012 – 2012 Cornell University Master | Chemical Engineering 2010 – 2010 Cornell University Master | Chemical Engineering 2007 – 2007 �cole Polytechnique F�d�rale de Lausanne Bachelor | Chemistry and Ch Valentin SimeonovResearchComplete publication list Valentin SimeonovCollaborateur scientifique- EPFL ENAC EFLUMList of publicationsRefereed 1. V. Mitev, V. Simeonov, and I. Grigorov, "Model experiment in measuring the temperature and concentration of water vapours in air by spontaneous Raman scattering", Bulg. J. Phys. 9, No 5, pp. 549-558, (1982)2. V. Mitev, V. Simeonov, and I. Grigorov, ”Atmospheric gases temperature measurements by pure rotational Raman scattering”, Russian Journal of Applied Spectroscopy, 39,
Jan Sickmann HesthavenProf. Hesthaven received an M.Sc. in computational physics from the Technical University of Denmark (DTU) in August 1991. During the studies, the last 6 months of 1989 was spend at JET, the european fusion laboratory in Culham, UK. Following graduation, he was awarded a 3 year fellowship to begin work towards a Ph.D. at Riso National Laboratory in the Department of Optics and Fluid Dynamics. During the 3 years of study, the academic year of 1993-1994 was spend in the Division of Applied Mathematics at Brown University and three 3 months during the summer of 1994 in Department of Mathematics and Statistics at University of New Mexico. In August 1995, he recieved a Ph.D. in Numerical Analysis from the Institute of Mathematical Modelling (DTU). Following graduation in August 1995, he was awarded an NSF Postdoctoral Fellowship in Advanced Scientific Computing and was approinted Visiting Assistant Professor in the Division of Applied Mathematics at Brown University. In December of 1996, he was appointed consultant to the Institute of Computer Applications in Science and Engineering(ICASE) at NASA Langley Research Center (NASA LaRC). As of July 1999, he was appointed Assistant Professor of Applied Mathematics, in September 2000 he was awarded an Alfred P. Sloan Fellowship, as of July 2001 he was awarded a Manning Assistant Professorship, and in March 2002, he was awarded an NSF Career Award. In January 2003, he was promoted to Associate Professor of Applied Mathematics with tenure and in May 2004 he was awarded Philip J. Bray Award for Excellence in Teaching in the Sciences (the highest award given for teaching excellence in all sciences at Brown University). He was promoted to Professor of Applied Mathematics as of July 2005. From October 2006 to June 2013, he was the Founding Director of the Center for Computation and Visualization (CCV) at Brown University. As of October 2007, he holds the (honorary) title of Professor (Adjunct) at the Technical University of Denmark. In November 2009, he successfully defended his dr.techn thesis at the Technical University of Denmark and was rewarded the degree of Doctor Technices -- the highest academic distinction awarded based on ... substantial and lasting contributions that has helped to move the research area forward and penetrated into applications. As grant Co-PI he served from Aug 2010 to June 2013 as Deputy Director of the Institute of Computational and Experimental Research in Mathematics (ICERM), the newest NSF Mathematical Sciences Research Institute. After having spend his entire academic career at Brown University, Prof Hesthaven decided to pursue new challenges and joined the Mathematics Institute of Computational Science and Engineering (MATHICSE) at Ecole Polytechnique Fédérale de Lausanne (EPFL) in Switzerland in July 2013. In March 2014 he was elected SIAM Fellow for contributions to high-order methods for partial differential equations.
Mahmut Selman SakarExpertise
robotics, mechanobiology, microtechnology, smart materials, biomedical devices
Teaching & PhD PhD Students Lorenzo Francesco John Noseda, Nikita Norkin, Elif Ezgi Inan, Houman Javaheri, Mehdi Ali Gadiri, Julian Leon Raub, Junsun Hwang Past EPFL PhD Students Erik Mailand, Raquel Filipa Penacho Parreira, Murat Kaynak, Lucio Pancaldi-Giubbini, Fazil Emre Uslu, Matthias Rüegg, Ece Özelçi, Emilie Vuille-Dit-Bille Past EPFL PhD Students as codirector Laura Joan Hermans, Sourabh Monnappa Kuppanda Jafri
Giovanni De MicheliExpertise
Design technologies for integrated systems on silicon, such as synthesis, hw/sw codesign and low-power design, as well as systems on heterogeneous platforms including electrical and biological components.
Scientific Director of EcoCloud Center at EPFL
Directing activities towards creating sustainable computation including AI.Designing energy-savvy data centers and edge devices.
More information
Please read http://si2.epfl.ch/~demichel/
Giovanni De Micheli is a research scientist in electronics and Dominique PiolettiDominique Pioletti received his Master in Physics from the Swiss Federal Institute of Technology Lausanne (EPFL) in 1992. He pursued his education in the same Institution and obtained his PhD in biomechanics in 1997. He developed original constitutive laws taking into account viscoelasticity in large deformations. Then he spent two years at UCSD as post-doc fellow acquiring know-how in cell and molecular biology. He was interested in particular to gene expression of bone cells in contact to orthopedic implant. In April 2006, Dominique Pioletti was appointed Assistant Professor tenure-track at the EPFL and is director of the Laboratory of Biomechanical Orthopedics. His research topics include biomechanics and tissue engineering of musculo-skeletal tissues; mechano-transduction in bone; development of orthopedic implant as drug delivery system. Since 2013, he has been promoted to the rank of Associate Professor.
César PulgarinProf. C. Pulgarin is Chemist from Lausanne University, Master in environmental chemistry from Geneva University, Ph D in synthesis bio-inspired of natural substances from Neuchâtel University. During his education he carried out several industrial trainings.
Since March 1989, he has been working at the EPFL where he is leader of the Advanced Oxidation Processes Group (GPAO) active in the development chemical, photochemical, electrochemical, ultrasonic processes, their coupling between them and with biological systems to degrade chemical and microbiological pollutants in water and air. He has an H index of 40 and he is the world most cited author in 1) TiO2 photo-assisted bacterial inactivation in water and 2) Coupling of photochemical and biological processes for pollutant degradation. He has been involved in ten African, South American and European international research projects. He has been Swiss representative in COST program 540.
