Nicola CasatiTeaching & PhD Courses Multidisciplinary NPs characterization MSE-676 Four experienced scientists will guide students into the world of NPs characterization with different approaches, from laboratory characterization to X-ray/neutron scattering and electron microscopy. The main knowledge acquired will concern the overview of possible complementary technique. Powder Diffraction School - Modern Syncrotron Methods MSE-663 Modern synchrotron-radiation methods not only provide dat
Hans-Peter SeifertTeaching & PhD Courses Effects of radiation on materials MSE-600 The purpose of this course is to provide the necessary background to understand the effects of irradiation on pure metals and on alloys used in the nuclear industry. The relation between the radiation-induced defects and the evolution of the mechanical properties is highlighted.
Jean-Marie Drezet1992-1996: PhD work at Laboratoire de Métallurgie Physique under the supervision of Prof. Michel Rappaz (cf : http://library.epfl.ch/theses/?display=detail&nr=1509) 1997-2000: EMPACT project (European Modelling Programme for Aluminium Casting Technologies) 2001-2004: VIRCAST project (European Virtual Casting) 2005-2006: Study of the sawing process of rolling sheet al. ingots (Alcan Fonds) 2005-2006: WelAIR project (Welding of Airframes, EADS) 2005-2008: study of the electron beam welding of Cu-Cr-Zr alloys (CEA, France) 2006-2008: study of the laser beam welding of Al-Li alloys (EADS, France) 2008-2011: co-supervision with Prof. A. Nussbaumer of the PhD work of C. Acevedo on the influence of residual stresses on the fatigue design of tubular welded joints, http://library.epfl.ch/theses/?nr=5056 2007-2010: co-supervision with Prof. J.-F. Molinari of the PhD work of K. Shahim on the Normal Pressure Hydrocephalus (S. Momjian, HU-Genève et R. Sinkus, ESPCI-Paris), http://library.epfl.ch/theses/?nr=5191 2008-2012: co-supervision with Prof. M. Rappaz of the PhD work of M. Sistaninia on the simulation of solidification cracking using granular models (CCMX-MERU project) 2010-2014: supervision with Prof. M. Rappaz of the PhD work of N. Chobaut on the modelling of stresses during quenching of thick heat treatable aluminium parts (CCMX-MERU project) 2011-2015: supervision with Prof. H. Van Swygenhoven-Moens of the PhD work of P. Schloth on precipitation during quenching of thick heat treatable aluminium parts (CCMX-MERU project) Xavier MaederTeaching & PhD PhD Students Samuel Felix Bojarski, Kamila Elzbieta Hamulka, Philipp Konrad Clewie Kroeker Past EPFL PhD Students as codirector Nicolò Maria Della Ventura Courses Advanced Microscopy for Materials MSE-677 This course provides an overview of advanced materials characterization techniques, focusing on modern Scanning Electron Microscopy (SEM) combined with Focused Ion Beam (FIB) systems (dual-beam), as well as Transmission Electron Microscopy (TEM) and Atom Probe Tomography (A
Andreas MortensenAndreas Mortensen is currently Professor and Director of the Institute of Materials at the Swiss Federal Institute of Technology in Lausanne (EPFL), where he heads the Laboratory for Mechanical Metallurgy. He joined the faculty of EPFL 1997 after ten years, from 1986 to 1996, as a member of the faculty of the Department of Materials Science and Engineering at the Massachusetts Institute of Technology, where he held the successive titles of ALCOA Assistant Professor, Associate Professor, and Professor. His research is focussed on the processing, microstructural development and mechanical behavior of advanced metallic materials with particular focus on metal matrix composites and metal foams, on infiltration processing and capillarity, and on damage and fracture in metallic materials. He is author or co-author of two monographs, around one hundred and eighty scientific or technical publications and twelve patents. Born in San Francisco in 1957, of dual (Danish and US) nationality, Andreas Mortensen graduated in 1980 from the Ecole Nationale Supérieure des Mines de Paris with a Diplôme dIngénieur Civil, and earned his Ph.D. in the Department of Materials Science and Engineering at MIT in 1986. Besides his academic employment, he was a postdoctoral researcher at Nippon Steel during part of 1986, and was invited professor at the Ecole des Mines in Paris during the academic year 1995 to 1996. He is a member of the editorial committee of International Materials Reviews and has co-edited four books. He is a Fellow of ASM, a recipient of the Howe Medal and the Grossman Award of the American Society of Metals, was awarded the Péchiney Prize by the French Academy of Sciences and the Res Metallica Chair from the Katholieke Universiteit Leuven, received three EPFL teaching awards, is one of ISIs Highly Cited authors for Materials Science since 2002 and was awarded an ERC advanced grant in 2012.
Alessandro PauTeaching & PhD PhD Students Peizheng Zhang, Jean-Pierre Thomas Svantner, Cristina Venturini, Paul Véronique Guillaume Devianne Courses Control and Operation of Tokamaks PHYS-748 This course treats the main issues in operation and control of a tokamak. Control-oriented models are derived and controllers are designed using techniques from modern control theory. Operational limits are discussed as well as state-of-the-art research questions for future reactors.
Nadine BalucTeaching & PhD Past EPFL PhD Students Emmanuelle Giacometti, Raluca Schibli, Gang Yu, Bin Long, Lyubomira Veleva
Athanasios NenesTeaching & PhD PhD Students Berkay Dönmez, Ernest Abboud Past EPFL PhD Students Paraskevi Georgakaki, Lucile Ricard Courses Atmospheric processes: from cloud to global scales ENV-407 The main objective is to present important atmospheric processes from the local to global scales. The course will start with cloud processes, continue to synoptic phenomena like extratropical cyclones and fronts, to finally cover numerical modeling at the regional and global scales. Introduction to environme
Annapaola ParrilliTeaching & PhD Courses Non-destructive methods for industry and research MSE-668 Basic knowledge ofthe classical non-destructive testing methods as they are used today in industrial applications and the advanced(mosily imaginé) technologies used for the analysis of materials and components in special applications. lt covers several material groups and various applications.
Davide FerriTeaching & PhD PhD Students Gabriela-Teodora Dutca, Daniel Camilo Cano Blanco, Marie-Gabrielle Ameres, Marianela Lopez Romero, Min Li Tan Past EPFL PhD Students as codirector Adrian Marberger, Patrick Simon Steiger, Thibault Xavier Florian Fovanna, Rob Jeremiah G. Nuguid, Maneka Claire Roger, Filippo Buttignol, Federico Cambiè
Alain NussbaumerExpertise
Metallic structuresStructural glassFatigue and fracture mechanicsAssessment of existing structuresUltra low cycle
Teaching & PhD Past EPFL PhD Students Luís Costa Borges, Claire Acevedo, Nariman Maddah, Farshid Zamiri Akhlaghi, Manuel Santarsiero, Luca D'Angelo, Cláudio Alexandre Pereira Baptista, Albano António Sousa, Jagoda Cupac, Ardalan Hosseini, Martin Garcia, Hossein Heydarinouri, Jian Zhan Past EPFL PhD Students as codirector Marina Rocha Courses Design of steel structures CIVIL-2
Eugen Brühwilerbirth date: 19.11.1958 nationality: Swiss (native from Dussnang, Canton of Thurgau) Education : - July 1988 : doctoral degree from the Swiss Federal Institute of Technology in Lausanne (EPFL), Switzerland with a thesis entitled Fracture mechanics of dam concrete subjected to quasi-static and seismic loading conditions - December 1983 : civil engineering diploma (university degree) from the Swiss Federal Institute of Technology (ETH) in Zurich, Switzerland Professional Experience : - Since 1st April 1995 : Professor of Structural Engineering at EPFL and Head of the Laboratory of Maintenance, Construction and Safety for Civil Structures (MCS) (often considered being the first chair worldwide devoted exclusively to existing civil structures). - 1991-94 Project Manager and structural engineer with the Swiss Federal Railways (SBB), Division of Bridges and Structures, Zurich: Monitoring and maintenance of bridges and structures, Project manager and checking engineer for the construction of new bridges and rehabilitation of existing bridges. - 1989/90 Research associate at the Department of Civil Engineering, University of Colorado, Boulder, USA : Fracture mechanics of concrete and fracture of concrete dams. - 1986-88 Doctoral student at EPFL-LMC (Building Materials, Prof. Wittmann) : Fracture mechanics of concrete, fracture of concrete dams under seismic loading - 1984/85 Research engineer at EPFL-ICOM (Steel Structures, Prof. Badoux and Prof. Hirt) : Fatigue behaviour and fracture mechanics of riveted bridges
Eric BoillatContact Microcity
Phone: 41 21 69 54456
Teaching & PhD Past EPFL PhD Students as codirector Serguei Kolossov, Cédric André, Jamasp Jhabvala, Christoph Van Gestel, Tatiana Polivnikova, Nikola Kalentics Courses Industrial production processes ME-212 Application windows of the main manufacturing process categories. Implementation of simple models describing the behavior of the main manufacturing processes. Basic understanding of the economic aspects of production processes. Manufacturing proc
