Publication

A round Robin-Highliting on the passivating contact technology

Publications associées (30)

Font Side Solutions for c-Si Solar Cells with High-Temperature Passivating Contacts

In this work, we studied the potential of using thin films deposited by plasma-enhanced chemical vapor deposition (PECVD) for two main purposes: introducing an n-type passivating contact at the front of a TOPCon solar cell, or simplifying the fabrication o ...

EPFL2024

Microstructural and electrical characterization of high temperature passivating contacts for silicon solar cells

Sofia Libraro

Recombination at metal/semiconductor interfaces represents the main limitation in mainstream c-Si solar cells, primarily based on the passivated emitter and rear cell (PERC) concept. Full-area passivating contacts based on SiOx/poly-Si stacks are a candida ...

EPFL2024

A thermotropic liquid crystal enables efficient and stable perovskite solar modules

Mohammad Khaja Nazeeruddin, Bin Ding, Jian Xu, Yong Ding, Cheng Liu

Perovskite solar cells have seen impressive progress in performance and stability, yet maintaining efficiency while scaling area remains a challenge. Here we find that additives commonly used to passivate large-area perovskite films often co-precipitate du ...

Nature Portfolio2024

Identification and Mitigation of Degradation Mechanisms Induced by Heat and Light in NiOx-based Perovskite Solar Cells

Marion Solange Madeleine Dussouillez

Perovskite solar cells (PSCs) offer an attractive solution to increase the efficiency of PV panels via perovskite/silicon tandems thanks to their potential cost-effectiveness and high efficiency. In inverted PSC architecture (p-i-n), commonly used hole con ...

EPFL2024

Supramolecular interactions using β-cyclodextrin in controlling perovskite solar cell performance

Jun Ho Yum, Kevin Sivula, Jiyoun Seo, Parnian Ferdowsi

In the context of perovskite solar cells (PSCs), enhancing device performance often involves adding a small excess of lead iodide (PbI2) to the precursor solution. However, the presence of unreacted PbI2 can lead to accelerated degradation compromising lon ...

Royal Society of Chemistry2024

Computational Studies on the Stability of Organic-Inorganic Hybrid Halide Lead Perovskites

Mathias Dankl

Perovskite-based solar cells are currently the most rapidly advancing photovoltaic technology but concerns about their long-term stability are still impeding full-scale commercialization. This thesis provides computational insights into some of the stabili ...

EPFL2024

Advanced Manufacturing and Characterization of Building-Integrated Photovoltaic Modules

Alejandro Borja Block

Photovoltaic (PV) technology is necessary for global decarbonization. However, one of the challenges of the technology is that its land use may conflict with other space demands. Building-integrated photovoltaic (BIPV) is a solution to efficiently use the ...

EPFL2024

Synergistic Redox Modulation for High-Performance Nickel Oxide-Based Inverted Perovskite Solar Modules

Mohammad Khaja Nazeeruddin, Bo Chen, Bin Ding, Yan Liu, Xianfu Zhang

Nickel oxide (NiOx)-based inverted perovskite solar cells stand as promising candidates for advancing perovskite photovoltaics towards commercialization, leveraging their remarkable stability, scalability, and cost-effectiveness. However, the interfacial r ...

Wiley2024

Materials engineering for improved stability of perovskite solar cells

Yeonju Kim

Halide perovskites have gained tremendous attention over the past decade, but the poor stability of perovskite solar cells (PSCs) under operating conditions hampers their practical application. This thesis investigates materials that can be used to enhance ...

EPFL2023

Photoelectrochemical Cell Engineering for Solar Energy Conversion

Dan Zhang

Solar energy is the most abundant energy source, harnessing solar energy holds the solution to the challenge of increasing global energy demand and reducing our dependence on fossil fuels. Photovoltaics which directly convert solar energy into electricity ...

EPFL2023

Low-loss contacts on textured substrates for inverted perovskite solar cells

Shaik Mohammed Zakeeruddin, Ursula Röthlisberger, Felix Thomas Eickemeyer, Nikolaos Lempesis, Mingyang Wei, Virginia Carnevali, Lorenzo Agosta

Inverted perovskite solar cells (PSCs) promise enhanced operating stability compared to their normal-structure counterparts1–3. To improve efficiency further, it is crucial to combine effective light management with low interfacial losses4,5. Here we devel ...

2023

Low-loss contacts on textured substrates for inverted perovskite solar cells

Shaik Mohammed Zakeeruddin, Mingkui Wang, Felix Thomas Eickemeyer, Mingyang Wei

Inverted perovskite solar cells (PSCs) promise enhanced operating stability compared to their normal-structure counterparts. To improve efficiency further, it is crucial to combine effective light management with low interfacial losses. Here we develop a c ...

Zenodo2023

Zn3P2 as an earth-abundant photovoltaic material: from growth to device

Rajrupa Paul

The development of cost-effective and earth-abundant semiconducting materials is imperative for the sustainable deployment of photovoltaic technology. Zinc phosphide (Zn3P2) is a promising candidate for terawatt-scale electricity generation. It has a near- ...

EPFL2023

Engineering ligand reactivity enables high-temperature operation of stable perovskite solar cells

Michael Graetzel, Shaik Mohammed Zakeeruddin, Thi Thu Trang Pham, Zaiwei Wang, Felix Thomas Eickemeyer, Jian Xu, Mingyang Wei, Cheng Liu

Perovskite solar cells (PSCs) consisting of interfacial two- and three-dimensional heterostructures that incorporate ammonium ligand intercalation have enabled rapid progress toward the goal of uniting performance with stability. However, as the field cont ...

American Association for the Advancement of Science2023

Overview of key results achieved in H2020 HighLite project helping to raise the EU PV industries' competitiveness

Antonin Faes, Gizem Nogay, Hugo James André Quest, Giuseppe Galbiati, Ning Chen

The EU crystalline silicon (c-Si) PV manufacturing industry has faced strong foreign competition in the last decade. To strive in this competitive environment and differentiate itself from the competition, the EU c-Si PV manufacturing industry needs to (1) ...

WILEY2023

Visualizing Interfacial Energy Offset and Defects in Efficient 2D/3D Heterojunction Perovskite Solar Cells and Modules

Mohammad Khaja Nazeeruddin, Paul Joseph Dyson, Bin Ding, Yong Ding

Currently, the full potential of perovskite solar cells (PSCs) is limited by chargecarrier recombination owing to imperfect passivation methods. Here, the recombination loss mechanisms owing to the interfacial energy offset and defects are quantified. The ...

Wiley-V C H Verlag Gmbh2023

Interface and structural engineering of perovskite solar cells towards enhanced stability and performance

Masaud Hassan S Almalki

Perovskite solar cells have had a meteoric rise in the last decade achieving efficiencies that already rival the most established solar cells technologies. They are easily processed and have excellent optoelectronic properties that make them accessible for ...

EPFL2023

22.8% full-area bifacial n-PERT solar cells with rear side sputtered poly-Si (n) passivating contact

Christophe Ballif, Sylvain Nicolay, Bertrand Yves Paul Paviet-Salomon, Andrea Ingenito, Sofia Libraro

High-temperature compatible passivating contacts based on phosphorus doped polysilicon (poly-Si(n)) on a thin silicon oxide, employed on the rear side of bifacial n-PERT like solar cells provide an efficiency increase while being compatible with current ph ...

ELSEVIER2023

Disorder-induced bulk photovoltaic effect in a centrosymmetric van der Waals material

Andras Kis, Juan Francisco Gonzalez Marin, Cheol Yeon Cheon, Mukesh Kumar Tripathi, Zhe Sun

Sunlight is widely seen as one of the most abundant forms of renewable energy, with photovoltaic cells based on pn junctions being the most commonly used platform attempting to harness it. Unlike in conventional photovoltaic cells, the bulk photovoltaic ef ...

2023

Chemical Trend of Nonradiative Recombination in Cu(In,Ga)Se2 Alloys

Stefano Falletta

Nonradiative recombination in Cu(In,Ga)Se2 (CIGS) solar cells has long been attributed to the antisite defects MCu (M = In, Ga), but the underlying mechanism is still elusive. Using rigorous first-principles calculations, we demonstrate that the antisites ...

American Physical Society (APS)2023