Publications associées à Tribocorrosion and electrochemical behaviour of nanocrystalline diamond coated Ti based alloys for orthopaedic application

Publications associées (31)

Towards Scalable Electronics: Synthetic 2D Materials for Large-Area 2D Circuit Integration

In the past decades, a significant increase of the transistor density on a chip has led to exponential growth in computational power driven by Moore's law. To overcome the bottleneck of traditional von-Neumann architecture in computational efficiency, effo ...

EPFL2024

Understanding and mitigating resistive losses in fired passivating contacts: role of the interfaces and optimization of the thermal budget

Christophe Ballif, Franz-Josef Haug, Aïcha Hessler-Wyser, Luca Massimiliano Antognini, Sofia Libraro, Audrey Marie Isabelle Morisset, Julien Hurni, Ezgi Genç

This work presents a study of p-type passivating contacts based on SiCx formed via a rapid thermal processing (RTP) step, using conditions compatible with the firing used to sinter screen-printed metallization pastes in industry. The contributions of the t ...

Elsevier2023

Layered metals as polarized transparent conductors

Philip Johannes Walter Moll, Matthias Carsten Putzke, Chunyu Guo

The quest to improve transparent conductors balances two key goals: increasing electrical conductivity and increasing optical transparency. To improve both simultaneously is hindered by the physical limitation that good metals with high electrical conducti ...

Nature Portfolio2023

Potential-induced degradation in bifacial silicon heterojunction solar modules: Insights and mitigation strategies

Christophe Ballif, Quentin Thomas Jeangros, Alessandro Francesco Aldo Virtuani, Luca Gnocchi, Olatz Arriaga Arruti

Potential-induced degradation (PID) may be a serious concern in photovoltaic (PV) modules and plants, particularly when approaching high system voltages (1500+ V). Here, we investigate PID occurring in bifacial rear-emitter silicon heterojunction (SHJ) sol ...

Wiley2023

Multiphysics model for assessing photoelectrochemical phenomena under concentrated irradiation

Sophia Haussener, Isaac Thomas Holmes-Gentle, Franky Esteban Bedoya Lora

A multiphysics model was developed for a photoelectrochemical (PEC) cell at the device level to simulate water splitting operating under concentrated irradiation (between 50 to 600 kW m−2). The 2D model couples charge, heat, mass, photon, and momentum tran ...

2023

Voltage-driven Reactivity of Liquid Ga and CuGa Nanoparticles for Electrocatalytic CO2 Reduction and Synthesis

Valery Okatenko

The rising atmospheric level of carbon dioxide, CO2, contributes to climate change and poses urgent need to find scalable solutions both to decrease its emissions and to be able to recycle it, if the goals of Paris Agreement to limit the temperature rise a ...

EPFL2023

Ru tailored hydrous cobalt phosphate as a rational approach for high-performance alkaline oxygen evolution reaction

Mohammad Khaja Nazeeruddin

The water splitting is an appealing approach to fulfil the demand of energy without any global concerns. The oxygen evolution reaction is one of way to achieve unlimited energy from water but the low stability, high energy required to drive the reaction (o ...

ELSEVIER SCI LTD2022

Application of Copper Thermal Spraying for Electrical Joints between Superconducting Nb3Sn Cables

Pierluigi Bruzzone, Vincenzo D'Auria

This manuscript reports on the application of copper thermal spraying in the manufacturing process of an electrical connection between Nb3Sn cables for superconducting magnets of fusion reactors. The joint is realized through diffusion bonding of the spray ...

MDPI2022

Development of stencil lithography for stretchable interconnects

Yi-Chiang Sun

The growing needs for human healthcare have driven the development of wearable devices for monitoring the health status of an individual. Polymers represent a promising platform for such devices due to their ability to form an intimate contact between soft ...

EPFL2022

Anisotropic and nonlinear transport in microstructured 3D topological semimetals

Xiangwei Huang

Topological semimetals are frequently discussed as materials platforms for future electronics that exploit the remarkable properties of their quasiparticles. These ideas are mostly based on dispersion relations that mimic relativistic particles, such as We ...

EPFL2022

Seed Dibbling Method for the Grow of High-Quality Diamond on GaN

Elison de Nazareth Matioli, Remco Franciscus Peter van Erp, Riyaz Mohammed Abdul Khadar, Reza Soleiman Zadeh Ardebili, Alessandro Floriduz, Mehdi Naamoun

The integration of diamond and GaN has been highly pursued for thermal management purposes as well as combining their exceptional complementary properties for power electronics applications and novel semiconductor heterostructures. However, the growth of d ...

AMER CHEMICAL SOC2021

Diamond on GaN integration for power semiconductor devices with efficient thermal management

Reza Soleiman Zadeh Ardebili

The international actions against global warming demands reductions in carbon emission and more efficient use of energy. Energy efficiency in the conversion and use of electricity, as an important form of energy in the modern life, has strong environmental ...

EPFL2021

Diamond diffractive optics-recent progress and perspectives

Niels Quack, Marcell Kristof Kiss, Gergely Huszka, Sichen Mi

Diamond is an exceptional material that has recently seen a remarkable increase in interest in academic research and engineering since high-quality substrates became commercially available and affordable. Exploiting the high refractive index, hardness, las ...

WALTER DE GRUYTER GMBH2021

Effects of 5 MeV electron irradiation on deep traps and electroluminescence from near-UV InGaN/GaN single quantum well light-emitting diodes with and without InAlN superlattice underlayer

Nicolas Grandjean, Jean-François Carlin, Raphaël Butté, Camille Haller

The electrical properties, electroluminescence (EL) power output and deep trap spectra were studied before and after 5 MeV electron irradiation of near-UV single-quantum-well (SQW) light-emitting diodes (LED) structures differing by the presence or absence ...

IOP PUBLISHING LTD2020

In Vitro Cytocompatibility Assessment of Ti-Modified, Silicon-oxycarbide-Based, Polymer-Derived, Ceramic-Implantable Electrodes under Pacing Conditions

Pierrick Guy Robert Clément, Jürgen Brugger, Demetri Psaltis, Eirini Kakkava, Giulia Panusa, Jongmoon Jang

Polymer-derived ceramics (PDC) have recently gained increased interest in the field of bioceramics. Among PDC's, carbon-rich silicon oxycarbide ceramics (SiOC) possess good combined electrical and mechanical properties. Their durability in aggressive envir ...

AMER CHEMICAL SOC2020

Single crystal diamond gain mirrors for high performance vertical external cavity surface emitting lasers

Niels Quack, Alexandru Mereuta, Andrei Caliman, Pascal Gallo, Grigore Suruceanu, Gergely Huszka, Mehdi Naamoun

We report on the design, fabrication and optical performance of gain mirrors in single crystal diamond substrates for vertical external cavity surface emitting lasers (VECSELs). VECSELs have gained attention recently due to their potential for high emissio ...

2020

Integration of hybrid material systems in conformable neural interfaces

Florian Dylan Fallegger

Neural interfaces are devices that are implanted into the body and interface electrically with the central (CNS) or peripheral nervous system. They are inserted surgically for short periods of time or chronically to diagnose or treat several neural disease ...

EPFL2020

Fretting-corrosion behavior of electroless Ni-P/Ni-P-TiO2 coatings obtained on AZ91D magnesium alloy by a chromium-free process

Stefano Mischler, Angela Bermudez Castañeda

Ni-P electroless coatings are widely applied for protection of magnesium alloys and other materials due to the low energy consumption of the process and high resistance to corrosion and wear, properties that can be improved with the incorporation of partic ...

ELSEVIER2020

An Overview of Serum Albumin Interactions with Biomedical Alloys

Oksana Klok, Stefano Mischler, Anna Neus Igual Muñoz

Understanding the interactions between biomedical alloys and body fluids is of importance for the successful and safe performance of implanted devices. Albumin, as the first protein that comes in contact with an implant surface, can determine the biocompat ...

2020

Gallium-Based Thin Films for Wearable Sensors and Electronic Skins

Laurent Mirko Dejace

Integrated wearable electronics capable of providing biophysical information on complex and dynamic systems have attracted high interest in diverse fields such as healthcare, gaming and robotics. Wearable sensors can create artificial, electronic skins wit ...

EPFL2020