Publications associées à Isolation of Mixed Compositions of Cellulose Nanocrystals, Microcrystalline Cellulose, and Lignin Nanoparticles from Wood Pulps

Publications associées (20)

Modeling and analysis of miniaturized magnetorheological valve for fluidic actuation

Fluidic actuation enables movement in a wide range of mechanical systems, from simple laboratory devices to more complex industrial machinery. Fluids are used to generate motion of mechanical pieces. The term "fluids" encompasses two types of technologies: ...

EPFL2023

Weakening effect of various pore fluids on the tensile strength of granite

Guanyi Lu

Laboratory three-point bending experiments are carried out to evaluate the effect of various fluids on the tensile strength of granite. The granite specimens were tested under both dry and saturated conditions. The fluids used to saturate the granite inclu ...

SPRINGER HEIDELBERG2022

3D printing of elastomeric mechanical sensors designed for human motion monitoring

Ryan Mitchell van Dommelen

In this thesis several advances are made to the emerging field of 3D printed mechanical sensors. Techniques and processes were developed to enable the integration of highly conductive, and capacitive and piezoresistive sensing features embedded within 3D p ...

EPFL2022

Viscoelastic behavior of suspensions of reduced graphene oxide nanoparticles in epoxy

László Forró, Yves Leterrier, Arnaud Magrez, Maryam Majidian

The viscoelastic behavior of dilute suspensions of reduced graphene oxide (RGO) nanoparticles in a liquid SU8 epoxy dissolved in gamma butyrolactone was investigated at RGO concentrations in the range from 0.16 to 1.07 vol. %. Our results revealed that the ...

AMER INST PHYSICS2021

Cellulose Nanocrystals with Tethered Polymer Chains: Chemically Patchy versus Uniform Decoration

Harm-Anton Klok, Alke Fink

The site-specific surface modification of colloidal substrates, yielding "patchy" nanoparticles, is a rapidly expanding area of research as a result of the new complex structural hierarchies that are becoming accessible to chemists and materials scientists ...

2017

Microdevices for Locomotion in Complex Biological Fluids

Tian Qiu

Locomotion is an essential feature for survival of many organisms, and it is also a technical requirement for untethered biomedical microdevices to operate inside the human body for targeted drug delivery and minimally invasive surgery. The overall goal of ...

EPFL2016

Titanium oxide aerogel composites

László Forró, Arnaud Magrez, Endre Horvath

The invention relates to titanium oxide aerogels, in particular to titanium oxide binary or ternary (e.g. titanium oxide-carbon) aerogel monoliths possessing ordered meso- and macroporosity. The porous scaffold can be made with or without addition of binde ...

2016

Environmental, Energetic and Economic Evaluation of Implementing a Supercritical Fluid-Based Nanocellulose Production Process in a Sugarcane Biorefinery

François Maréchal, Juliana Queiroz Albarelli

Nanocellulose, which is a disintegration product of plant cellulose, has recently come to public attention because of its great mechanical properties combined with renewability and biodegradability. From an environmental point-of-view, nanocellulose has sh ...

AIDIC Servizi S.r.l.2016

Photo-polymerization, swelling and mechanical properties of cellulose fibre reinforced poly(ethylene glycol) hydrogels

Jan-Anders Edvin Maansson, Dominique Pioletti, Pierre-Etienne Bourban, Andreas Schmocker, Azadeh Khoushabi

The application of hydrogels as load-bearing biomedical components is often limited by their mechanical properties. Often an attempt to improve a hydrogel's stiffness is accompanied by a loss of toughness and swelling properties. In this work, we show that ...

Elsevier Sci Ltd2015

Swimming by reciprocal motion at low Reynolds number

Tian Qiu

Biological microorganisms swim with flagella and cilia that execute nonreciprocal motions for low Reynolds number (Re) propulsion in viscous fluids. This symmetry requirement is a consequence of Purcell's scallop theorem, which complicates the actuation sc ...

Nature Publishing Group2014

Dam Break of Newtonian Fluids and Granular Suspensions : Internal Dynamics Measurements

Nicolas Andreini

The objective of this thesis was to increase our understanding of two-phase geophysical flows (e.g. debris flows) by providing velocity profiles in idealized laboratory avalanches. To that end, we developed a new experimental platform made up of an incline ...

EPFL2012

Solution viscosity and flocculation characteristics of linear polymeric flocculants in various media

Jutta Christine Wandrey, David Hunkeler

Rheological characteristics of linear copolymers of acrylamide (AM) and acryloyloxyethyltrimethyl ammonium chloride (Q9), differing in molar mass and chemical composition, have been studied in distilled water (DW) and industrial water (IW) obtained from a ...

2011

Low-Stress UV-Curable Hyperbranched Polymer Nanocomposites for High-Precision Devices

Valérie Geiser

The aim of this thesis was to investigate the process-structure-property relationships of UV-curable hyperbranched polymer (HBP)/silica nanocomposites. Special attention was paid to the interplay between photo-conversion, rheological behavior, shrinkage, a ...

EPFL2010

Highly filled polymer nanocomposite films derived from novel nanostructured latexes

The overall aim of this thesis has been to assess the potential of latex-based technologies for the preparation of polymer/clay nanocomposites. The key feature of latex-based technologies is that they offer the possibility of improved control of the final ...

EPFL2010

Experimental investigation of the spreading of viscoplastic fluids on inclined planes

Christophe Ancey, Steve Cochard

We report experimental results related to the dam-break problem for viscoplastic fluids. Using image processing techniques, we were able to accurately reconstruct the free-surface evolution of fixed volumes of fluid suddenly released a plane. We used Carbo ...

Elsevier2009

Parameter and process significance in mechanistic modeling of cellulose hydrolysis

David Andrew Barry

A process-based model relevant to landfill and anaerobic digesters was developed, which included a novel approach to biomass transfer between a cellulose-bound biofilm and biomass in the bulk liquid. Model results highlighted the significance of the bacter ...

Elsevier2008

Fiber reinforced polypropylene nanocomposites

Chrystèle Houphouet-Boigny Favre

The aim of this thesis is to assess the feasibility of integrating nanoparticles into glass fiber (GF) reinforced isotactic polypropylene (iPP) composites via existing thermoplastic processing routes, and to investigate whether this results in significant ...

EPFL2007

Highly branched polymer/montmorillonite clay nanocomposites

Marlene Rodlert

The aim of this thesis has been to assess the potential of branched polymers as novel exfoliants for layered silicates and their application in polyurethanes. Three different types of –OH functional branched polymers have been studied: dendrimers, hyperbra ...

EPFL2005

Experiments investigating the effects of fluid elasticity on laminar vortex shedding from a cylinder

Christopher Pipe

Experiments on vortex shedding from a cylinder placed in uniform flows of low concentration polymer solutions are reported for Reynolds numbers from 50 to 150. The fluids used were aqueous solutions of polyethylene oxide (PEO) and rheological characterizat ...

EPFL2005

Particle migration in a concentrated suspension flowing between rotating parallel plates: Investigation of diffusion flux coefficients

Etienne Pierre Lemaire

This paper reports an experimental and numerical study conducted to investigate the behavior of macroscopic monomodal concentrated suspensions (40%) undergoing a creeping torsional flow between two rotating plates. An experimental technique based on the de ...

2005