Publications associées à Active aerodynamic drag reduction on morphable cylinders

Lumped Drag Model Identification and Real-Time External Force Detection for Rotary-Wing Micro Aerial Vehicles

This work focuses on understanding and identifying the drag forces applied to a rotary-wing Micro Aerial Vehicle (MAV). We propose a lumped drag model that concisely describes the aerodynamical forces the MAV is subject to, with a minimal set of parameters ...

IEEE2024

Method for wind harvesting and wind rejection in flying drones

Dario Floreano, Victor Casas Rochel, Nathan Samuel Müller, Charalampos Vourtsis, William John Stewart

The present invention concerns a method of manoeuvring a vertical take-off and landing, unmanned aerial drone (100) comprising at least an aerodynamic surface (101), wherein, during a flight of the drone, the aerodynamic surface generates lift and/or drag ...

2024

Towards an improved understanding of wind turbine wakes in complex terrain

Arslan Salim Dar

In this thesis, we explored the effect of certain terrain-induced flow phenomena on the development of wind turbines sited in complex terrain. A combined experimental and analytical approach is used to study wind turbine wakes in different types of complex ...

EPFL2024

Enhancing Wind Farm Performance through Axial Induction and Tilt Control: Insights from Wind Tunnel Experiments

Fernando Porté Agel, Guillem Armengol Barcos

Static axial induction control and tilt control are two strategies that have the potential to increase power production in wind farms, mitigating wake effects and increasing the available power for downstream turbines. In this study, wind tunnel experiment ...

MDPI2024

Wind turbine wake superposition under pressure gradient

Fernando Porté Agel, Arslan Salim Dar

We investigate the effect of pressure gradient on the cumulative wake of multiple turbines in wind tunnel experiments spanning across a range of adverse pressure gradient (APG), zero pressure gradient (ZPG), and favorable pressure gradient (FPG). Compared ...

2024

The effect of nacelle-to-rotor size on the wake of a miniature wind turbine

Fernando Porté Agel, Arslan Salim Dar, Rim Majzoub

Wind tunnel experiments are performed to investigate the effect of nacelle-to-rotor size on the wake of a wind turbine under different Reynolds numbers. Four different turbine configurations are tested, which vary in the rotor diameter and nacelle length a ...

IOP Science2024

Power performance of a model floating wind turbine subjected to cyclic pitch motion: A wind tunnel study

Fernando Porté Agel, Guiyue Duan, Daniele Gattari

Wind tunnel experiments were performed with a miniature floating wind turbine model to study the effects of cyclic pitch motion on its power performance. The cyclic pitch motion was prescribed by two key parameters: pitch frequency and amplitude. The power ...

IOPscience2024

Data from: Optimal blade pitch control for enhanced vertical-axis wind turbine performance

Sébastien Le Fouest, Karen Ann J Mulleners

This directory contains open-source data obtained using a single-bladed H-type vertical-axis wind turbine prototype with individual blade pitching. This data results from the optimisation of the blade's pitching kinematics using a genetic algorithm at two ...

Zenodo2024

Mode I fracture of thick adhesively bonded GFRP composite joints for wind turbine rotor blades

Véronique Michaud, Anastasios Vassilopoulos, Jialiang Fan

This article investigates the effects of voids, joint geometry, and test conditions on the quasi-static Mode I fracture performance of thick adhesive Double Cantilever Beam (DCB) joints such as those prevailing in wind industry and shipbuilding. The specim ...

2024

Optimal blade pitch control for enhanced vertical-axis wind turbine performance

Sébastien Le Fouest, Karen Ann J Mulleners

Vertical-axis wind turbines are great candidates to enable wind power extraction in urban and off-shore applications. Currently, concerns around turbine efficiency and structural integrity limit their industrial deployment. Flow control can mitigate these ...

Nature Research2024

Improvements to the dynamic wake meandering model by incorporating the turbulent Schmidt number

Fernando Porté Agel, Corey Dean Markfort, Peter Andreas Brugger

Predictions of the dynamic wake meandering model (DWMM) were compared to flow measurements of a scanning Doppler lidar mounted on the nacelle of a utility-scale wind turbine. We observed that the wake meandering strength of the DWMM agrees better with the ...

2024

Non-contact sensing for anomaly detection in wind turbine blades: A focus-SVDD with complex-valued auto-encoder approach

Olga Fink, Gaëtan Michel Frusque

The occurrence of manufacturing defects in wind turbine blade (WTB) production can result in significant increases in operation and maintenance costs of WTBs, reduce capacity factors of wind farms, and occasionally lead to severe and disastrous consequence ...

2024

Snowfall deposition in mountainous terrain: a statistical downscaling scheme from high-resolution model data on simulated topographies

Michael Lehning

One of the primary causes of non-uniform snowfall deposition on the ground in mountainous regions is the preferential deposition of snow, which results from the interaction of near-surface winds with topography and snow particles. However, producing high-r ...

Frontiers Media Sa2024

The effects of kinematics, flexibility, and planform on the vortex formation and aerodynamic performance of flapping wing flight

Alexander Gehrke

In this thesis, the aerodynamic challenges in flapping wing flight are addressed. In particular, the effects of different wing kinematics, flexibilities, and planforms on the the leading edge vortex development and aerodynamic performance are investigated. ...

EPFL2023

Wind Turbine Wakes in Active Yaw Control: Numerical and Theoretical Studies

Mou Lin

In this thesis, we explore the best practice of simulating the wakes of the turbines under active yaw control (AYC) using large-eddy simulation (LES). In the first study, we validate the blade-element actuator disk model (ADM-BE) for a yawed wind turbine. ...

EPFL2023

Dynamic stall characterisation and control for vertical-axis wind turbines

Sébastien Le Fouest

According to the International Energy Agency, the global net-zero emissions objective requires the installed wind power capacity to increase 11-fold between 2020 and 2050. The scientific community has recently voiced concerns about the logistic feasibility ...

EPFL2023

Time scales of dynamic stall development on a vertical-axis wind turbine blade

Sébastien Le Fouest, Karen Ann J Mulleners, Daniel Marie Fernex

Vertical-axis wind turbines are excellent candidates to diversify wind energy technology, but their aerodynamic complexity limits industrial deployment. To improve the efficiency and lifespan of vertical-axis wind turbines, we desire data-driven models and ...

2023

Earwig-inspired foldable origami wing for micro air vehicle gliding

Jamie Paik, Risa Ishiguro

Foldable wings serve as an effective solution for reducing the size of micro air vehicles (MAVs) during non-flight phases, without compromising the gliding capacity provided by the wing area. Among insects, earwigs exhibit the highest folding ratio in thei ...

Frontiers Media Sa2023

Power Production and Blade Fatigue of a Wind Turbine Array Subjected to Active Yaw Control

Fernando Porté Agel, Mou Lin

This study investigated the power production and blade fatigue of a three-turbine array subjected to active yaw control (AYC) in full-wake and partial-wake configurations. A framework of a two-way coupled large eddy simulation (LES) and an aeroelastic blad ...

MDPI2023

Wind Defiant Morphing Drones

Dario Floreano, Victor Casas Rochel, Nathan Samuel Müller, Charalampos Vourtsis, William John Stewart

Intense winds are a challenge for vertical take-off and landing drones with wings. In particular, in the hovering regime, wings are sensitive to wind currents that can be detrimental to their operational and energetic performances. Tail-sitters are particu ...

2023