Stress–strain curveIn engineering and materials science, a stress–strain curve for a material gives the relationship between stress and strain. It is obtained by gradually applying load to a test coupon and measuring the deformation, from which the stress and strain can be determined (see tensile testing). These curves reveal many of the properties of a material, such as the Young's modulus, the yield strength and the ultimate tensile strength. Generally speaking, curves representing the relationship between stress and strain in any form of deformation can be regarded as stress–strain curves.
Stress–strain analysisStress–strain analysis (or stress analysis) is an engineering discipline that uses many methods to determine the stresses and strains in materials and structures subjected to forces. In continuum mechanics, stress is a physical quantity that expresses the internal forces that neighboring particles of a continuous material exert on each other, while strain is the measure of the deformation of the material. In simple terms we can define stress as the force of resistance per unit area, offered by a body against deformation.
Deformation (engineering)In engineering, deformation refers to the change in size or shape of an object. Displacements are the absolute change in position of a point on the object. Deflection is the relative change in external displacements on an object. Strain is the relative internal change in shape of an infinitesimally small cube of material and can be expressed as a non-dimensional change in length or angle of distortion of the cube. Strains are related to the forces acting on the cube, which are known as stress, by a stress-strain curve.
Yield (engineering)In materials science and engineering, the yield point is the point on a stress-strain curve that indicates the limit of elastic behavior and the beginning of plastic behavior. Below the yield point, a material will deform elastically and will return to its original shape when the applied stress is removed. Once the yield point is passed, some fraction of the deformation will be permanent and non-reversible and is known as plastic deformation.
Infinitesimal strain theoryIn continuum mechanics, the infinitesimal strain theory is a mathematical approach to the description of the deformation of a solid body in which the displacements of the material particles are assumed to be much smaller (indeed, infinitesimally smaller) than any relevant dimension of the body; so that its geometry and the constitutive properties of the material (such as density and stiffness) at each point of space can be assumed to be unchanged by the deformation.
PolyuréthaneUn polyuréthane ou polyuréthanne est un polymère d'uréthane, une molécule organique. On appelle uréthane, ou plus couramment « carbamate », tout composé produit par la réaction d'un isocyanate et d'un alcool conformément à la réaction suivante : vignette|redresse=1.5|centré Cette réaction était connue depuis plusieurs décennies lorsqu'en 1937, Otto Bayer découvrit comment en faire un plastique utilisable, exempt de polyisocyanate et polyol.
FluageLe fluage est le phénomène physique qui provoque la déformation irréversible différée (c'est-à-dire non instantanée) d’un matériau soumis à une contrainte constante (notée ), même inférieure à la limite d'élasticité du matériau, pendant une durée suffisante. Le fluage ainsi que la relaxation de contrainte sont deux méthodes en quasi statique de caractérisation des matériaux visqueux (cas du béton). vignette|100px|Essai de fluage à chaud.
Polystyrènevignette|110px|Code d'identification de la résine PS.vignette|Le polystyrène est inflammable. thumb|Un pot de yaourt vignette|Rénovation énergétique : immeuble isolé par l'extérieur (ITE) au moyen de panneaux en PSE graphité. vignette|Utilisation du PSE comme matériau d'emballage. vignette|Caisses-marée au pavillon des produits de la mer du marché international de Rungis. Le polystyrène (sigle PS), sagex (Suisse) styromousse (Canada) ou frigolite (Belgique) est le polymère de formule -(CH2-CH(Ph)n-, obtenu par polymérisation du monomère styrène CH2=CH-Ph.
Biodegradable plasticBiodegradable plastics are plastics that can be decomposed by the action of living organisms, usually microbes, into water, carbon dioxide, and biomass. Biodegradable plastics are commonly produced with renewable raw materials, micro-organisms, petrochemicals, or combinations of all three. While the words "bioplastic" and "biodegradable plastic" are similar, they are not synonymous. Not all bioplastics (plastics derived partly or entirely from biomass) are biodegradable, and some biodegradable plastics are fully petroleum based.
Necking (engineering)In engineering and materials science, necking is a mode of tensile deformation where relatively large amounts of strain localize disproportionately in a small region of the material. The resulting prominent decrease in local cross-sectional area provides the basis for the name "neck". Because the local strains in the neck are large, necking is often closely associated with yielding, a form of plastic deformation associated with ductile materials, often metals or polymers.
Failure analysisFailure analysis is the process of collecting and analyzing data to determine the cause of a failure, often with the goal of determining corrective actions or liability. According to Bloch and Geitner, ”machinery failures reveal a reaction chain of cause and effect... usually a deficiency commonly referred to as the symptom...”. Failure analysis can save money, lives, and resources if done correctly and acted upon.
Droits des ÉtatsDans la politique aux États-Unis, le terme « droits des États » (states' rights) fait référence à la souveraineté individuelle des gouvernements des États américains vis-à-vis de l'État fédéral. La répartition des pouvoirs est déterminée par la Constitution, reflétant notamment les pouvoirs énumérés du Congrès et le Dixième amendement. La question des droits des États fut l'un des principaux arguments négationnistes du mouvement néo-confédéré, qui a cherché à légitimer a posteriori la « Cause perdue » de la Confédération, en niant le fait que l'esclavage fut la cause principale de la guerre de Sécession.
Fatigue (matériau)vignette|Photomicrographie de la progression des fissures dans un matériau dues à la fatigue. Image tirée de . La fatigue est l'endommagement local d'une pièce sous l'effet d'efforts variables : forces appliquées, vibrations, rafales de vent Alors que la pièce est conçue pour résister à des efforts donnés, la variation de l'effort, même à des niveaux bien plus faibles que ceux pouvant provoquer sa rupture, peut à la longue provoquer sa rupture. Les essais de fatigue permettent de déterminer la résistance des matériaux à de telles faibles charges répétées.
