Publications associées à Analysis and Reduction of Time Response in Thermally Activated Shape Memory Alloys

Publications associées (29)

Frequency response of fiber reinforced DEAs

Yves Perriard, Yoan René Cyrille Civet, Thomas Guillaume Martinez, Stefania Maria Aliki Konstantinidi

Dielectric Elastomer Actuators (DEAs) have emerged as versatile and promising devices for a multitude of applications, including soft robotics, haptic interfaces, and artificial muscles. DEAs are an interesting soft actuator technology due to their high en ...

Society of Photo-Optical Instrumentation Engineers (SPIE)2024

Decomposition method to evaluate district heating/cooling network potential at urban scale

Ana Catarina Gouveia Braz, François Maréchal, Luc Girardin, Bingqian Liu

In this work, a tool to design district heating networks (DHN) is presented and applied to the city of Lausanne as a case study. The evaluation of the buildings’ heat/cooling demand is performed using a Geographic Information System (GIS) database, built f ...

Associazione Italiana Di Ingegneria Chimica2024

Near-Room-Temperature Detection of Aromatic Compounds with Inkjet-Printed Plasticized Polymer Composites

Jürgen Brugger, Thomas Maeder, Mohammadmahdi Kiaee

Chemiresistive gas sensors composed of a thermoplastic polymer matrix and conductive fillers offer various advantages for detecting volatile organic compounds (VOCs), including low power consumption due to near-room-temperature operation, high sensitivity, ...

Amer Chemical Soc2024

Computational fluid dynamics simulations of the heat transfer properties of graphene-based nanolubricants and application to hydrodynamic lubrication

Roberto Guarino

In this paper, we consider experimental data available for graphene-based nanolubricants to evaluate their convective heat transfer performance by means of computational fluid dynamics (CFD) simulations. Single-phase models with temperature-dependent prope ...

Aip Publishing2024

Data-Driven Control Synthesis using Koopman Operator: A Robust Approach

Alireza Karimi, Nathan Russell Powell, Mert Eyuboglu

This paper proposes a data-driven control design method for nonlinear systems that builds upon the Koopman operator framework. In particular, the Koopman operator is used to lift the nonlinear dynamics to a higher-dimensional space where the so-called obse ...

2024

Humidity-insensitive optical fibers for distributed sensing applications

Luc Thévenaz, Tiago Filipe Pimentel Das Neves

Humidity is a critical environmental factor in various applications, and its temperature dependence must be considered when developing thermo-hygrometer fiber sensors. The optical fibers that constitute the sensor must have a temperature reference, which s ...

2023

Frequency and time domains interactions in nanophotonics

Andrei Kiselev

In this thesis, we discuss the problems of scattering and optical manipulation related to nanosystems of different complexities. The multipolar decomposition method is used to represent scattering processes in nanosystems as a series of elementary excitati ...

EPFL2023

Multiscale enhancement of refrigerant falling film boiling by combining commercially enhanced tubes with nanostructures

John Richard Thome

Multiscale surface structures offer the opportunity to combine the heat transfer enhancement provided by microscale structures with the dryout benefits provided by some nanostructures, which is particularly attractive for falling film evaporators, who have ...

Pergamon-Elsevier Science Ltd2023

Improved Waste Heat Management and Energy Integration in an Aluminum Annealing Continuous Furnace Using a Machine Learning Approach

Mohammad Andayesh, François Maréchal, Daniel Alexander Florez Orrego

Annealing furnaces are critical for achieving the desired material properties in the production of high-quality aluminum products. In addition, energy efficiency has become more and more important in industrial processes due to increasing decarbonization r ...

2023

Beam radiation penetration in particle b e ds for heat transfer modeling of a centrifugal solar particle receiver

Evan Fair Johnson

This article describes a study of beam radiation striking particle beds of randomly packed, spherical par-ticles. The current study is focused on concentrating solar power receivers which use solid particles as a heat transfer medium, but results are appli ...

PERGAMON-ELSEVIER SCIENCE LTD2023

Heat transfer of uncoated and nanostructure coated commercially micro-enhanced refrigeration tubes under pool boiling conditions

John Richard Thome

The heat transfer performance of commercially produced micro-enhanced tubes with and without a nanocoating was investigated under pool boiling of saturated refrigerant. These multiscale enhancements were on the outside of 19 mm horizontal copper tubes heat ...

Pergamon-Elsevier Science Ltd2023

Achieving Optimal Performance With Data-Driven Frequency-Based Control Synthesis Methods

Alireza Karimi, Philippe Louis Schuchert

Frequency Response Function (FRF)-based control synthesis methods for Linear Time-Invariant (LTI) systems have been widely used in control theory and industry. Recently, there has been renewed interest in these methods, employing numerical optimization too ...

Ieee-Inst Electrical Electronics Engineers Inc2023

Nanoscale thermal control of a single living cell enabled by diamond heater-thermometer

Aleksandra Radenovic, Evgenii Glushkov

We report a new approach to controllable thermal stimulation of a single living cell and its compartments. The technique is based on the use of a single polycrystalline diamond particle containing silicon-vacancy (SiV) color centers. Due to the presence of ...

Nature Portfolio2023

Single photon detection with amorphous silicon-based microchannel plates: A Monte Carlo model

Christophe Ballif, Nicolas Würsch, Jonathan Emanuel Thomet, Janina Christine Isabelle Löffler, Samira Alexandra Frey

Microchannel plates based on amorphous silicon have the inherent capability to overcome the existing spatial and temporal resolution limitations of single photon detectors. A Monte Carlo model-based study is presented here that serves to exploit their full ...

2022

Systematic extraction of a control-oriented model from perturbative experiments and SOLPS-ITER for emission front control in TCV

Olivier Claude Martin Février, Artur Perek, Mirko Wensing

Systematic extraction of locally valid dynamic models from experiments is necessary for controller design and the validation of high fidelity models. This paper describes the extraction of a dynamic model in the form of a transfer function, giving the dyna ...

IOP Publishing Ltd2022

Flexure pivot based system

Simon Nessim Henein, Loïc Benoît Tissot-Daguette, Michal Stanislaw Smreczak

Flexure pivot based system (1) being one of: a force sensor, a force limiting device arranged to exert a predetermined threshold force, a torque limiting device arranged to exert a predetermined threshold torque, a programmable mechanical memory, or an acc ...

2022

Principle and Analysis of Radial-Force-Based Swirling Actuator for Low-Speed High-Torque Applications

Adrien Jean-Michel Thabuis

This article proposes a swirling actuator that uses the electromagnetic radial force and mechanical gears to generate rotational torque. The proposed actuator generates a rotating radial force between an inner stator and a swirler. The gears on the swirler ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2022

Effects of resonator geometry and substrate stiffness on the tunability of a deformable microwave metasurface

Romain Christophe Rémy Fleury

Tunable metasurfaces can shift their resonant frequency through different approaches, one of which is applying mechanical deformations. Here, we show the effects of two key factors on the tunability of deformable metasurfaces; the resonator geometry and su ...

2022

Designing a District Energy Infrastructure-a Case-Study in Lisbon

François Maréchal, Sébastien Cajot, Nils Christian Schüler

The paper describes a case study on the design of district energy infrastructure for the green-field project of the Vale de Santo Antonio (Lisbon, Portugal). The methodology is based on a novel framework built on the sequential integration of three softwar ...

FRONTIERS MEDIA SA2022

Heat transfer of flow boiling carbon dioxide in vertical upward direction

Jürg Alexander Schiffmann, Rémi Revellin, David Schmid

Heat transfer measurements of flow boiling Carbon Dioxide (CO2) in vertical upward direction have been carried out with a dedicated test facility at the European Organization for Nuclear Research (CERN). The experiments have been conducted in a vertical up ...

2022