Publications associées à Waves generated by ship convoy: Comparison of physical and numerical modeling with in-situ measurements

Publications associées (22)

Renewable energy integration and waste heat valorization in aluminum remelting for co-producing kerosene and methanol

François Maréchal, Daniel Alexander Florez Orrego, Meire Ellen Gorete Ribeiro Domingos

The aluminium sector relies on natural gas for the conversion of recycled scrap into new feedstock, which results in substantial atmospheric emissions. Hydric resources are also impacted, as they serve as heat sinks for the waste heat generated during the ...

Associazione Italiana Di Ingegneria Chimica2024

Tandem catalysis enables chlorine-containing waste as chlorination reagents

Paul Joseph Dyson, Xinbang Wu, Mingyang Liu

Chlorinated compounds are ubiquitous. However, accumulation of chlorine-containing waste has a negative impact on human health and the environment due to the inapplicability of common disposal methods, such as landfill and incineration. Here we report a su ...

Nature Portfolio2024

A machine learning architecture for including wave breaking in envelope-type wave models

Debbie Eeltink

Wave breaking is a complex physical process about which open questions remain. For some applications, it is critical to include breaking effects in phase-resolved envelope-based wave models such as the non-linear Schr & ouml;dinger. A promising approach is ...

Pergamon-Elsevier Science Ltd2024

Towards edible robots and robotic food

Dario Floreano, Jun Shintake, Bokeon Kwak, Markéta Pankhurst

Edible robots and robotic food — edible systems that perceive, process and act upon stimulation — could open a new range of opportunities in health care, environmental management and the promotion of healthier eating habits. For example, they could enable ...

2024

Electric-field-induced second-order nonlinear processes in stoichiometric silicon nitride

Boris Zabelich

Nonlinear optical frequency conversion is one of the driving research areas in photonics. Its quasi instantaneous response and the promise of low power consumption in integrated structures could cover the demand for fast signal processing with minimal ener ...

EPFL2024

Reuse of cut concrete slabs in new buildings for circular ultra-low-carbon floor designs

Corentin Jean Dominique Fivet, Numa Joy Bertola, Célia Marine Küpfer

The study explores an original idea that responds to the urgent need to reduce the detrimental environmental impacts of load-bearing floor construction in new buildings by reusing saw-cut reinforced concrete (RC) pieces salvaged from soon-to-be demolished ...

2024

Decision support methodology for waste-to-value process integration

Rafael Amorim Leandro De Castro Amoedo

Waste treatment is a complex procedure that comprises multidimensional aspects. The challenges posed by the energy transition and international protocols emphasize the role of waste in its material and energy dimension. With an increasing population and li ...

EPFL2023

Lignin, from biomass waste to sustainable materials for food packaging, antiviral coatings and agriculture

Alice Boarino

Our planet has been challenged for years by our reckless use of fossil fuels, which has led to the ongoing climate change and energy crisis. The transition to the use of renewable alternative sources has now became urgent and inevitable. The valorization o ...

EPFL2023

On the role of system integration in plastic waste management

François Maréchal, Ivan Daniel Kantor, Julia Granacher

The management of plastic waste is a growing concern that can harm wildlife and ecosystems, and its end-of-life policies are key to mitigating plastic environmental impact. This work presents a decision-making methodology for the thermal and material valor ...

Elsevier2023

Investigation of Biomass Hydrothermal Conversion Products by HRMS

Daniil Salionov

The dependency on fossil fuels and their impact on the environment is a matter of great concern for the future sustainability of modern society. The development of the "green" technologies which utilize renewable energy sources is now under investigation. ...

EPFL2023

Selection and Optimal Use of Nanoporous Materials for Adsorption Energy Technologies

Emanuele Piccoli

Due to the large waste of heat in the power and industrial sectors, our use of energy is inefficient. Moreover, it relies on rapidly depleting and greenhouse-gas-emitting sources such as fossil fuels. While the scarcity of energy resources is a relevant so ...

EPFL2023

Printed degradable piezoelectric microsystems: From ink formulation to device fabrication and characterization

Morgan Mc Kay Monroe

As the world moves further and further into the semiconductor era, the amount of waste generated from electronics ("e-waste") is increasing rapidly and unsustainably. Of particular note, alternatives to lead-based piezoelectric materials must be establishe ...

EPFL2023

Stochastic particle transport by deep-water irregular breaking waves

Debbie Eeltink

Correct prediction of particle transport by surface waves is crucial in many practical applications such as search and rescue or salvage operations and pollution tracking and clean-up efforts. Recent results by Deike et al. (J. Fluid Mech., vol. 829, 2017, ...

Cambridge University Press2023

Comparison of regression techniques for generating surrogate models to predict the thermodynamic behavior of biomass gasification systems

François Maréchal, Daniel Alexander Florez Orrego, Julia Granacher, Meire Ellen Gorete Ribeiro Domingos, Marie Jane Francine Jones

Biomass resources can play an important role in the energy transition, being a dynamic feedstock that can be transformed either into solid, liquid or gaseous fuels. The biomass gasification is a versatile way to convert wastes into energy. In this work, th ...

Elsevier2023

Addressing the challenges of homogeneity, quality control and waste handling in soil bio-cementation: A large-scale experiment

Lyesse Laloui, Dimitrios Terzis, Ray Harran

In an attempt to go beyond the conventional laboratory experiments widely reported in literature around the emerging technique of soil bio-cementation, this work addresses key challenges related to its large-scale application. Precisely, a state-of-the-art ...

JAPANESE GEOTECHNICAL SOC2023

Small-scale turbopumps for waste heat recovery applications based on an organic Rankine cycle: a study from pre-design to experimental validation

Sajjad Zakeralhoseini

The organic Rankine cycle (ORC) system is among the technologies applied to exploit waste heat in vehicles. Since common organic fluids have lower latent heat than water, higher mass flow rates are required to convert the same waste heat, considerably incr ...

EPFL2023

A systemic study for enhanced waste heat recovery and renewable energy integration towards decarbonizing the aluminium industry

François Maréchal, Daniel Alexander Florez Orrego

The aluminium remelting industry relies on natural gas to transform recycled aluminium into aluminium feedstock, entailing significant atmospheric emissions. Hydric resources are also affected as they are used as sinks of waste heat from the casting proces ...

2023

Nanoliter Liquid Packaging in a Bioresorbable Microsystem by Additive Manufacturing and its Application as a Controlled Drug Delivery Device

Jürgen Brugger, Arnaud Bertsch, Cristina Martin Olmos, Jongeon Park

Precise packaging of nanoliter amounts of liquid in a microsystem is important for many biomedical applications. However, existing liquid encapsulation technologies have limitations in terms of liquid waste, evaporation, trapped bubbles, and liquid degrada ...

2023

A Reuse-Ready Timber Slab-and-Column System for Modular Building Structures

Corentin Jean Dominique Fivet, Jan Friedrich Georg Brütting, Jonas Warmuth, Edisson Xavier Estrella Arcos, Alex-Manuel Muresan

The construction industry is a significant contributor to resource consumption and waste generation. To address this issue, component reuse has been proposed as a way to prevent valuable building elements from being discarded and avoid producing new ones. ...

Curran Associates, Inc.2023

Non-contact robotic manipulation of floating objects: exploiting emergent limit cycles

Josephine Anna Eleanor Hughes, Nana Obayashi

The study of non-contact manipulation in water, and the ability to robotically control floating objects has gained recent attention due to wide-ranging potential applications, including the analysis of plastic pollution in the oceans and the optimization o ...

Frontiers Media Sa2023