Publications associées à Design and manufacture of a full size joint sample (FSJS) for the qualification of the poloidal field (PF) Insert coil

Publications associées (32)

The magnet feeders for the European DEMO fusion reactor: Conceptual design and recent advances

The magnet feeders are part of the critical systems of a fusion reactor since they represent the interface between the in-cryostat components at 4.5 K and the room-temperature cryogenic plant and power supply. The European DEMO tokamak foresees 16 toroidal ...

2024

Performance Comparison of Cables With Partial Transposition

Pierluigi Bruzzone, Kamil Sedlák, Chiara Frittitta, Federica Demattè

The need of full transposition of the current carrying elements (strands) in large cables is frequently retained as top design criterion for conductors operating in pulsed mode. However, when the transposition error, i.e., the inductance difference among t ...

IEEE Institute of Electrical and Electronics Engineers2024

DTT toroidal field conductor samples test in Sultan: DC and AC characterization

Kamil Sedlák, Hugues Marie Alain Bajas, Mattia Ortino

The superconducting magnet system of the Divertor Tokamak Test (DTT) facility, composed of 18 toroidal field (TF) coils, 6 poloidal field coils and a central solenoid, has been designed and many procurements have been launched. Some manufacturing aspects a ...

Iop Publishing Ltd2024

Validation and Application of Hysteresis Loss Model for HTS Stacks and Conductors for Fusion Applications

Nikolay Bykovskiy

Numerous conductor designs for pulsed magnets based on High Temperature Superconductors (HTS), featuring stacks of tapes are currently being proposed. A major contribution to the AC losses is expected to be given by hysteresis losses. Several numerical mod ...

IEEE Institute of Electrical and Electronics Engineers2024

Long plasma duration operation analyses with an international multi-machine (tokamaks and stellarators) database

Stefano Coda, Jeffrey Huang

Combined high-fusion performance and long-pulse operation is one of the key integration challenges for fusion energy development in magnetic devices. Addressing these challenges requires an integrated vision of physics and engineering aspects with the purp ...

IOP Publishing Ltd2024

Thermoelectric power of overdoped Tl2201 crystals: charge density waves and T1 and T2 resistivities

Matthias Carsten Putzke

We report measurements of the in-plane thermoelectric power (TEP) for an overdoped (OD) crystal of the single layer cuprate superconductor Tl2Ba2CuO6+x (Tl2201) at several hole concentrations (p), from 300 or 400 K to below the superconducting transition t ...

Iop Publishing Ltd2024

Large impact of phonon lineshapes on the superconductivity of solid hydrogen

Lorenzo Monacelli

Phonon anharmonicity plays a crucial role in determining the stability and vibrational properties of high-pressure hydrides. Furthermore, strong anharmonicity can render phonon quasiparticle picture obsolete questioning standard approaches for modeling sup ...

Nature Portfolio2024

DC Power Distribution Networks with Direct Current Transformers

Renan Pillon Barcelos

The shift towards DC power distribution networks, enabled by power electronics technologies, is changing the nature of electrical power systems. Nowadays, DC power distribution networks can effectively support the high penetration of distributed energy res ...

EPFL2024

Technology-Aware Logic Synthesis for Superconducting Electronics

Giovanni De Micheli, Dewmini Sudara Marakkalage, Siang-Yun Lee, Alessandro Tempia Calvino, Mingfei Yu, Rassul Bairamkulov

Superconducting electronics provide us with cryogenic digital circuits that can rival established technologies in performance and energy consumption. Today, the lack of tools for the design of large-scale integrated superconducting circuits is a major obst ...

2024

Re-design of EU DEMO with a low aspect ratio

Xabier Sarasola Martin

The design point that had been chosen for EU DEMO in 2016 is reviewed here and a modification is proposed with a lower aspect ratio. Previously the same aspect ratio, A, was chosen for EU DEMO as in major tokamak experiments including ITER (A = 3.1), and, ...

Elsevier2024

Studies of crystal collimation for heavy ion operation at the LHC

Rongrong Cai

At CERN's Large Hadron Collider (LHC), proton and heavy-ion beams are accelerated to multi-TeV energies to be collided for the needs of the scientific community around the world. The total stored beam energy of tens to hundreds ofMJ creates potential threa ...

EPFL2024

Modeling and optimization of PCB coils for inductive power transfer systems

Xiaotong Du

The auxiliary power supply for medium voltage converters requires high insulation capability between the source and the load. Inductive power transfer technology, with an air gap between the primary and secondary coil, offers such high insulation capabilit ...

EPFL2024

Global fluid simulations of plasma turbulence in stellarators

António João Caeiro Heitor Coelho

In order to cope with the decarbonization challenge faced by many countries, fusion is one of the few alternatives to fossil fuels for the production of electricity. Two devices invented in the middle of the previous century have emerged as the most promis ...

EPFL2024

DEMO toroidal field coil fast discharge unit integration studies

Roberto Guarino

The Fast Discharge Units (FDUs) of the Superconducting (SC) Toroidal Field (TF) coils in the European demonstration fusion power plant DEMO warrant the machine integrity over its full lifetime against severe failure events, such as SC coil quenches or any ...

Elsevier Science Sa2024

Error field detection and correction studies towards ITER operation

Olivier Sauter

In magnetic fusion devices, error field (EF) sources, spurious magnetic field perturbations, need to be identified and corrected for safe and stable (disruption-free) tokamak operation. Within Work Package Tokamak Exploitation RT04, a series of studies hav ...

IOP Publishing Ltd2024

Progress in the development of the ITER baseline scenario in TCV

Olivier Sauter, Stefano Coda, Alexander Karpushov, Yann Camenen, Benoît Labit, Antoine Pierre Emmanuel Alexis Merle, Olivier Claude Martin Février, Simon Van Mulders, Filippo Bagnato, Alessandro Pau, Matteo Vallar, Cassandre Ekta Contré, Stefano Marchioni, Oleg Krutkin, Reinart Andreas J. Coosemans

Under the auspices of EUROfusion, the ITER baseline (IBL) scenario has been jointly investigated on AUG and TCV in the past years and this paper reports on the developments on TCV. It is found that the performance of TCV IBL is mainly limited by (neoclassi ...

2024

Partial discharge localization in power transformer tanks using machine learning methods

Farhad Rachidi-Haeri, Marcos Rubinstein, Hamidreza Karami

This paper presents a comparison of machine learning (ML) methods used for three-dimensional localization of partial discharges (PD) in a power transformer tank. The study examines ML and deep learning (DL) methods, ranging from support vector machines (SV ...

Nature Publishing Group2024

Experimental study of stability, quench propagation and detection methods on 15 kA sub-scale HTS fusion conductors in SULTAN

Pierluigi Bruzzone, Kamil Sedlák, Nikolay Bykovskiy, Ortensia Dicuonzo

High-temperature superconductors (HTSs) enable exclusive operating conditions for fusion magnets, boosting their performance up to 20 T generated magnetic fields in the temperature range from 4 K to 20 K. One of the main technological issues of HTS conduct ...

IOP Publishing Ltd2023

The MAgnet Design Explorer algorithm (MADE) for LTS, Hybrid or HTS toroidal and poloidal systems of a tokamak with a view to DEMO

Xabier Sarasola Martin

The European Roadmap to Fusion Electricity (Federici et al., 2018) [1] details the path to complete within the next three decades the DEMOnstration power plant, DEMO, aiming to a net gain of Energy Q=40. The 2018 DEMO baseline considers a 2 GW tokamak devi ...

2023

Impact of Hysteresis Losses in Hybrid (HTS-LTS) Coils for Fusion Applications

Davide Uglietti

Several conductor designs featuring High Temperature Superconducting (HTS) stacked tapes for fusion coils are being proposed. These conductors are planned to operate in time-varying magnetic field and current; thus, the estimation of AC losses is fundament ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2023