Publication

Numerical Flow Analysis in a Pelton Turbine Bucket

Publications associées (27)

Stable cones in the thin one-phase problem

The aim of this work is to study homogeneous stable solutions to the thin (or fractional) one -phase free boundary problem. The problem of classifying stable (or minimal) homogeneous solutions in dimensions n >= 3 is completely open. In this context, axial ...

Johns Hopkins Univ Press2024

Laterally unconfined neutral or negative buoyancy inflow into a quiescent ambient over sloping bottom

Haoran Shi

This work studies the nearshore hydrodynamics of a shallow turbulent flow entering a laterally unconfined quiescent ambient with a sloping bottom boundary. Examples of such flow are neutrally buoyant ebb tidal jets and hyperpycnal river plumes entering ope ...

EPFL2023

Visualization and modelling of dynamic flow in fibrous preforms for liquid composite molding

Helena Luisa Teixido Pedarros

Nowadays, Liquid Composite Molding techniques are often used to manufacture high quality fiber reinforced composite parts at a relatively low cost. These involve an infiltration process, in which a liquid resin is forced to ingress into a dry fibrous porou ...

EPFL2023

Measurement and modelling of dynamic fluid saturation in carbon reinforcements

Véronique Michaud, Baris Çaglar, Helena Luisa Teixido Pedarros, Guillaume Clément Broggi

We propose a methodology to monitor the progressive saturation of a non-translucent unidirectional carbon fabric stack through its thickness by means of X-ray radiography and extract the dynamic saturation curves using image analysis. Four constant flow ra ...

2023

Dynamic environmental flows using hydrodynamic-based solutions for sustainable hydropower

Giovanni De Cesare, Paolo Perona

Water diversions from rivers and torrents for anthropic uses of the resource alter the natural flow regime. As a measure, environmental flows have been prescribed and often are enforced by law to follow policies (e.g., minimal flow, proportional redistribu ...

CRC Press/Balkema2023

Numerical analysis of apparatus-induced dispersion for density-dependent solute transport in porous media

David Andrew Barry, Hong Zhang

The effects of apparatus-induced dispersion on nonuniform, density-dependent flow in a cylindrical soil column were investigated using a finite-element model. To validate the model, the results with an analytical solution and laboratory column test data we ...

2023

One-Dimensional "Ghost Imaging" in Electron Microscopy of Inelastically Scattered Electrons

Fabrizio Carbone, Ivan Madan, Giovanni Maria Vanacore, Ido Kaminer, Ebrahim Karimi, Simone Gargiulo

Entanglement and correlation are at the basis of quantummechanicsand have been used in optics to create a framework for "ghostimaging". We propose that a similar scheme can be used in anelectron microscope to exploit the correlation of electrons with theco ...

2023

Emergent non-Hermitian localization phenomena in the synthetic space of zero-dimensional bosonic systems

Fabrizio Minganti

Phase transitions in non-Hermitian systems are at the focus of cutting edge theoretical and experimental research. On the one hand, parity-time- (PT-) and anti-PT-symmetric physics have gained ever-growing interest, due to the existence of non-Hermitian sp ...

AMER PHYSICAL SOC2023

Scaling behavior of bedload transport: what if Bagnold was right?

Christophe Ancey

There is a paradox in the relationship between bedload transport rates and flow variables: laboratory and field studies have reported on how bedload transport rates depend on flow variables through a power law, but none of the empirical laws fitted to the ...

2023

Columnlike free-interface flows: symmetry breaking and linear instability

Shahab Eghbali

This thesis is dedicated to the analysis of a subclass of interfacial flows, columnlike free-interface flows, from two view angles: (i) the symmetry breaking under geometry-induced or external forces, (ii) their stability against infinitesimal disturbances ...

EPFL2023

Nonlinear dynamics and Kerr frequency comb formation in lattices of coupled microresonators

Tobias Kippenberg, Kenichi Komagata, Alexey Tikan, Aleksandr Tusnin

Recently, substantial progress has been made in the understanding of microresonators frequency combs based on dissipative Kerr solitons (DKSs). However, most of the studies have focused on the single-resonator level. Coupled resonator systems can open new ...

Nature Portfolio2023

Infrared-active phonons in one-dimensional materials and their spectroscopic signatures

Nicola Marzari, Thibault Daniel Pierre Sohier, Norma Rivano

Dimensionality provides a clear fingerprint on the dispersion of infrared-active, polar-optical phonons. For these phonons, the local dipoles parametrized by the Born effective charges drive the LO-TO splitting of bulk materials; this splitting actually br ...

Nature Portfolio2023

Self-sustained dynamics and forced resonant oscillations in flows: cross-junction jets and sloshing liquids

Alessandro Bongarzone

In engineering, oscillatory instabilities and resonances are often considered undesirable flow features and measures are taken to avoid them. This may include avoiding certain parametric regions or implementing control and mitigation strategies. However, t ...

EPFL2023

Long-range electrostatic contribution to electron-phonon couplings and mobilities of two-dimensional and bulk materials

Massimiliano Stengel, Nicola Marzari, Marco Gibertini, Samuel Poncé

Charge transport plays a crucial role in manifold potential applications of two-dimensional materials, in-cluding field-effect transistors, solar cells, and transparent conductors. At most operating temperatures, charge transport is hindered by scattering ...

AMER PHYSICAL SOC2023

From coating flow patterns to porous body wake dynamics via multiscale models

Pier Giuseppe Ledda

Multiscale phenomena are involved in countless problems in fluid mechanics. Coating flows are known to exhibit a broad variety of patterns, such as wine tears in a glass and dripping of fresh paint applied on a wall. Coating flows are typically modeled und ...

EPFL2022

Bottom-Pressure Development Due to an Abrupt Slope Reduction at Stepped Spillways

Anton Schleiss, José Pedro Gamito de Saldanha Calado Matos, Michael Pfister, Mohammad Javad Ostad Mirza

Fluctuating bottom-pressures on stepped chutes are relevant for the spillway design. An abrupt slope reduction causes a local alteration of the bottom-pressure development. Little information is available regarding the air–water flow properties near an abr ...

2022

Overflow pressure characterization in lined plunge pools for slab sizing

Giovanni De Cesare, Pedro Filipe De Almeida Manso, Francisca Marco Cutillas

This study presents an experimental work on dynamic pressures at the bottom of a lined plunge pool that receives overflow rectangular impinging jets and aims at improving the design criteria for pool slabs. The experiments were conducted in a fairly large ...

International Association for Hydro-Environment Engineering and Research (IAHR)2022

Conjugate heat transfer in isolated granular clusters with interstitial fluid using lattice Boltzmann method

Mehrdad Kiani Oshtorjani

The conjugate heat transfer in mixtures of a fluid and single granular clusters is studied in this paper using a novel lattice Boltzmann method (LBM) programmed for parallel computation on the graphics processing unit (GPU). The LBM is validated for heat c ...

PERGAMON-ELSEVIER SCIENCE LTD2022

Three-dimensional Fermi surfaces from charge order in layered CsV3Sb5

Yi-Chiang Sun, Xiangwei Huang, Philip Johannes Walter Moll, Matthias Carsten Putzke, Chunyu Guo

The cascade of electronic phases in CsV3Sb5 raises the prospect to disentangle their mutual interactions in a clean, strongly interacting kagome lattice. When the kagome planes are stacked into a crystal, its electronic dimensionality encodes how much of t ...

AMER PHYSICAL SOC2022

High resolution and three-dimensional printing in complex photosensitive materials

Christophe Moser, Jorge Andres Madrid Wolff, Antoine Vincent Boniface

The present invention is related to a method of volumetric manufacturing a three-dimensional object or article by illuminating a non-transparent and/or absorptive photo-sensitive material with light patterns from multiple angles, comprising the steps of ca ...

2022