Publications associées à Method and Procedure in Metal Detection and Distinctive Discrimination of Size, Shape, and Location of Hidden Single and Multi-Material Targets

Pseudo-Three-Dimensional Analytical Model of Linear Induction Motors for High-Speed Applications

André Hodder, Mario Paolone, Lucien André Félicien Pierrejean, Simone Rametti

Literature on linear induction motors (LIMs) has proposed several approaches to model the behavior of such devices for different applications. In terms of accuracy and fidelity, field analysis-based models are the most relevant. Closed-form or numerical so ...

2024

Integrated Wireless Power, Data Communication, and Thermal Sensing System for Autonomous Multisite Brain Implants

Implanted medical devices (IMDs) have been widely developed to support the monitoring and recording of biological data inside the body or brain. Wirelessly powered IMDs, a subset of implantable electronics, have been proposed to eliminate the limitations r ...

EPFL2024

Magnetism of Single Surface Adsorbed Atoms Studied with Radio-Frequency STM

Clément Marie Soulard

This thesis investigates the magnetic properties of single atoms and molecules adsorbed on thin magnesium oxide decoupling layers, grown on a silver single crystal. To address these systems experimentally, we use a low temperature scanning tunneling micros ...

EPFL2024

Modeling and optimization of PCB coils for inductive power transfer systems

Xiaotong Du

The auxiliary power supply for medium voltage converters requires high insulation capability between the source and the load. Inductive power transfer technology, with an air gap between the primary and secondary coil, offers such high insulation capabilit ...

EPFL2024

Computational design and additive manufacturing of electromagnetic coils

Adrien Jean-Michel Thabuis

The modern world is heavily reliant on electromagnetic devices to convert mechanical energy into electrical energy and vice versa. These devices are fundamental to powering our society, and the growing need for automated production lines and electrified tr ...

EPFL2023

Roadmap on Optical Sensors

Luc Thévenaz, Lei Zhang

Optical sensors and sensing technologies are playing a more and more important role in our modern world. From micro-probes to large devices used in such diverse areas like medical diagnosis, defense, monitoring of industrial and environmental conditions, o ...

2023

A KL Divergence-Based Loss for In Vivo Ultrafast Ultrasound Image Enhancement with Deep Learning

Jean-Philippe Thiran, Roser Vinals Terres

Ultrafast ultrasound imaging, characterized by high frame rates, generates low-quality images. Convolutional neural networks (CNNs) have demonstrated great potential to enhance image quality without compromising the frame rate. However, CNNs have been most ...

2023

Modeling and analysis of miniaturized magnetorheological valve for fluidic actuation

Sofia Lydia Ntella

Fluidic actuation enables movement in a wide range of mechanical systems, from simple laboratory devices to more complex industrial machinery. Fluids are used to generate motion of mechanical pieces. The term "fluids" encompasses two types of technologies: ...

EPFL2023

Architecture for integrated RF photonic downconversion of electronic signals

Tobias Kippenberg, Junqiu Liu

Electronic analog to digital converters (ADCs) are run-ning up against the well-known bit depth versus bandwidth trade off. Towards this end, radio frequency (RF) photonic-enhanced ADCs have been the subject of interest for some time. Optical frequency com ...

Optica Publishing Group2023

Radiation Hardness of MALTA2, a Monolithic Active Pixel Sensor for Tracking Applications

Edoardo Charbon, Ashish Sharma, Francesco Piro

MALTA is a depleted monolithic active pixel sensor (DMAPS) developed in the Tower Semiconductor 180-nm CMOS imaging process. Monolithic CMOS sensors offer advantages over current hybrid imaging sensors in terms of both increased tracking performance due to ...

Ieee-Inst Electrical Electronics Engineers Inc2023

Exploring the effectiveness of using internal CNC system signals for chatter detection in milling process

Dimitrios Kyritsis, Roberto Pérez, Xiaochen Zheng

Chatter is a harmful self-excited vibration that commonly occurs during milling processes. Data -driven chatter detection and prediction is critical to achieve high surface quality and process efficiency. Most existing chatter detection approaches are base ...

ACADEMIC PRESS LTD- ELSEVIER SCIENCE LTD2023

MALTA-Cz: a radiation hard full-size monolithic CMOS sensor with small electrodes on high-resistivity Czochralski substrate

Edoardo Charbon, Ashish Sharma, Francesco Piro

Depleted Monolithic Active Pixel Sensor (DMAPS) sensors developed in the Tower Semiconductor 180 nm CMOS imaging process have been designed in the context of the ATLAS ITk upgrade Phase-II at the HL-LHC and for future collider experiments. The "MALTA-Czoch ...

Iop Publishing Ltd2023

Methodology for selecting measurement points that optimize information gain for model updating

Ian Smith, Numa Joy Bertola

Information collected through sensor measurements has the potential to improve knowledge of complex-system behavior, leading to better decisions related to system management. In this situation, and particularly when using digital twins, the quality of sens ...

2023

First developments towards producing inductive magnetic sensors using state-of-the-art photolithography techniques

Duccio Testa, Ambrine Douhane, Marcus Cemes

Inductive magnetic sensors are needed for tokamak operation to provide the low-frequency (LF) measurements leading to the equilibrium reconstruction and to monitor the higher frequency (HF) instabilities; the HF magnetic sensors are often also used as a ba ...

2023

LenslessPiCam: A Hardware and Software Platform for Lensless Computational Imaging with a Raspberry Pi

Martin Vetterli, Sepand Kashani, Matthieu Martin Jean-André Simeoni, Eric Bezzam

This toolkit has everything you need to perform imaging with a lensless camera. We make use of a low-cost implementation of DiffuserCam, namely replacing the lens with a piece of tape and using the Raspberry Pi HQ camera sensor. Similar principles and meth ...

Zenodo2023

Biodegradable materials as sensitive coatings for humidity sensing in S-band microwave frequencies

Danick Briand, James Alec Pierce Bourely, Nicolas Francis Fumeaux, Leticia de Sousa, Oleksandr Vorobyov

Worldwide, electronic waste represents the fastest-growing stream of waste. With an increasing number of connected devices, passive and eco-friendly environmental sensing solutions need to be developed. Wireless passive devices for RFID and sensing exist, ...

2023

Dynamics analysis for DC transformers integration in hybrid AC‐DC power distribution networks

Drazen Dujic, Max Dupont, Jules Christian Georges Macé, Renan Pillon Barcelos, Andrea Cervone

In AC/DC power distributions networks, power converters are interfacing buses to ensure DC voltage regulation and power distribution. Active front ends are used between AC and DC buses and two typical control schemes that can be implemented are voltage reg ...

2023

Spatial-Temporal Graph Attention Fuser for Calibration in IoT Air Pollution Monitoring Systems

Olga Fink, Mengjie Zhao, Keivan Faghih Niresi

The use of Internet of Things (IoT) sensors for air pollution monitoring has significantly increased, resulting in the deployment of low-cost sensors. Despite this advancement, accurately calibrating these sensors in uncontrolled environmental conditions r ...

Institute of Electrical and Electronics Engineers2023

Ultra-Low Power Short-Range 60-GHz FMCW Radar Front-End

Sammy Cerida Rengifo

The millimeter wave (mmWave) frequency band is becoming very interesting over the past years because it provides the opportunity to operate using large bandwidths which are not available at lower frequencies. This enables new communication standards suppor ...

EPFL2023

Modelling and Sensors for Magnetically-Levitated Disc Drives

Juan Patricio Tomás Peralta Fierro

The development of new industrial applications has diverted the focus of research towards compacter and faster rotatory drives. These requirements push the classical ball-bearings of electric motors to the limits in terms of operational lifetime and fricti ...

EPFL2022