Publications associées à A Method for the Assessment of the Optimal Parameter of Discrete-Time Switch Model

Publications associées (31)

Quantifying the Unknown: Data-Driven Approaches and Applications in Energy Systems

In light of the challenges posed by climate change and the goals of the Paris Agreement, electricity generation is shifting to a more renewable and decentralized pattern, while the operation of systems like buildings is increasingly electrified. This calls ...

EPFL2024

Emulating Multimemristive Behavior of Silicon Nanowire-Based Biosensors by Using CMOS-Based Implementations

Kapil Bhardwaj, Sandro Carrara, Junrui Chen

The research presented in this article draws inspiration from previous efforts aimed at replicating the functions of various solid-state memristors using a variety of materials. The memristor circuit emulator serves as a cost-effective tool for circuit des ...

Ieee-Inst Electrical Electronics Engineers Inc2024

Unified Harmonic Power-Flow and Stability Analysis of Power Grids with Converter-Interfaced Distributed Energy Resources

Johanna Kristin Maria Becker

Modern power distribution systems are experiencing a large-scale integration of Converter-Interfaced Distributed Energy Resources (CIDERs). Their presence complicates the analysis and mitigation of harmonics, whose creation and propagation may be amplified ...

EPFL2024

Phase Shift Angle Segmentation Modulation for Soft-Switching Medium-Voltage DAB Converter With Series-Connected SiC MOSFETs

Chengmin Li

The medium-voltage (MV) dual active bridge (DAB) converter with series-connected SiC (S-SiC) MOSFETs is a promising solution for high-power-density isolated dc/dc converter. To improve the voltage sharing and reliability of S-SiC, relatively large snubber ...

Ieee-Inst Electrical Electronics Engineers Inc2024

An aircraft assembly process formalism and verification method based on semantic modeling and MBSE

Dimitrios Kyritsis, Jinzhi Lu, Xiaochen Zheng

The aircraft assembly system is highly complex involving different stakeholders from multiple domains. The design of such a system requires comprehensive consideration of various industrial scenarios aiming to optimize key performance indicators. Tradition ...

Elsevier Sci Ltd2024

Graph generative deep learning models with an application to circuit topologies

Igor Krawczuk

Modern integrated circuits are tiny yet incredibly complex technological artifacts, composed of millions and billions of individual structures working in unison. Managing their complexity and facilitating their design drove part of the co-evolution of mode ...

EPFL2024

Advanced Silicon and SWIR Single-Photon Avalanche Diodes: Design, Simulation, and Characterization

Ekin Kizilkan

Low-level light detection with high spatial and timing accuracy is a growing area of interest by virtue of applications such as light detection and ranging (LiDAR), biomedical imaging, time-resolved Raman spectroscopy, and quantum applications. Single-phot ...

EPFL2024

High-Resolution Modeling Without Computation Slowdown for PETALE in CROCUS

Andreas Pautz, Vincent Pierre Lamirand, Axel Guy Marie Laureau, Thomas Jean-François Ligonnet

In a collaboration between Ecole Polytechnique Fédérale de Lausanne (EPFL) and CEA, in the fall of 2020, the experimental Programme d’Étude en Transmission de l’Acier Lourd et ses Eléments (PETALE) was successfully carried out in the CROCUS reactor of EPFL ...

2024

Dynamical simulation via quantum machine learning with provable generalization

Zoë Holmes

Much attention has been paid to dynamical simulation and quantum machine learning (QML) independently as applications for quantum advantage, while the possibility of using QML to enhance dynamical simulations has not been thoroughly investigated. Here we d ...

Amer Physical Soc2024

Pseudo-Three-Dimensional Analytical Model of Linear Induction Motors for High-Speed Applications

Mario Paolone, André Hodder, Simone Rametti, Lucien André Félicien Pierrejean

Literature on linear induction motors (LIMs) has proposed several approaches to model the behavior of such devices for different applications. In terms of accuracy and fidelity, field analysis-based models are the most relevant. Closed-form or numerical so ...

2024

Active Voltage Balancing with Seamless Integration into Dual Gate Driver for Series Connection of SiC MOSFETs

Drazen Dujic, Rui Wang

The versatility of half-bridge configuration of silicon carbide (SiC) metal-oxide-semiconductor field-effect transistor (MOSFET) power module contributes to its widespread adoption, highlighting the popularity and significance of its corresponding dual gat ...

2024

A Two-Wired High Input Impedance and High CMRR Active Electrode Insensitive to Component Mismatch

Alexandre Schmid, Mehdi Saberi

This article proposes a new two-wired amplifying active electrode (AE), presenting a high input impedance and a high common-mode rejection ratio (CMRR). In the proposed structure, the input impedance and the CMRR of the system are considerably increased by ...

Ieee-Inst Electrical Electronics Engineers Inc2024

Active Power Decoupling for Single-Phase Input-Series-Output-Parallel Solid-State Transformers

Drazen Dujic, Andrea Cervone, Tianyu Wei

Solid-state transformers with input-series outputparallel structures are being considered for a variety of applications requiring MVAC to LVDC conversion. Due to the singlephase AC/DC conversion at the input side, all floating cells of the solid-state tran ...

2024

Static and Dynamic Voltage Balancing for an IGCT-Based Resonant DC Transformer

Drazen Dujic, Renan Pillon Barcelos, Nikolina Djekanovic

This paper focuses on the operational characteristics of a medium voltage resonant DC transformer based on a split capacitor IGCT 3L-NPC leg. The study delves into both the dynamic and static balancing aspects of the 3L-NPC when operating in a two-level, 5 ...

2024

Design and manufacture of edible microfluidic logic gates

Dario Floreano, Bokeon Kwak, Shuhang Zhang

Edible robotics is an emerging research field with potential use in environmental, food, and medical scenarios. In this context, the design of edible control circuits could increase the behavioral complexity of edible robots and reduce their dependence on ...

IEEE2023

REMOTE: Re-thinking Task Mapping on Wireless 2.5D Systems-on-Package for Hotspot Removal

David Atienza Alonso, Giovanni Ansaloni, Marina Zapater Sancho, Darong Huang, Rafael Medina Morillas

2.5D Systems-on-Package (SoPs) are composed by several chiplets placed on an interposer. They are becoming increasingly popular as they enable easy integration of electronic components in the same package and high fabrication yields. Nevertheless, they int ...

2023

Modeling and Design Optimization of Loosely Coupled PCB Spiral Coils in Inductive Power Transfer Systems

Drazen Dujic, Xiaotong Du

There are various possibilities to realize coil winding designs for an inductive power transfer system. In order to achieve high power transfer efficiency and power density and explore trade-offs between the two, design optimization around the coil link is ...

2023

Generalizing Bulk-Synchronous Parallel Processing for Data Science: From Data to Threads and Agent-Based Simulations

Zilu Tian

Agent-based simulations have been widely applied in many disciplines, by scientists and engineers alike. Scientists use agent-based simulations to tackle global problems, including alleviating poverty, reducing violence, and predicting the impact of pandem ...

EPFL2023

PINION: physics-informed neural network for accelerating radiative transfer simulations for cosmic reionization

Jean-Paul Richard Kneib, Emma Elizabeth Tolley, Michele Bianco

With the advent of the Square Kilometre Array Observatory (SKAO), scientists will be able to directly observe the Epoch of Reionization by mapping the distribution of neutral hydrogen at different redshifts. While physically motivated results can be simula ...

OXFORD UNIV PRESS2023

Analysis and Design for Medium Voltage Dual Active Bridge Converter Based on Series-Connected SiC MOSFETs

Chengmin Li

In this article, a series-connected SiC MOSFETs-based medium voltage (MV) dual active bridge (DAB) converter featuring a lowvoltage difference amongdevices and high efficiency is proposed. In the developed DAB converter, the zero voltage switching-on chara ...

Ieee-Inst Electrical Electronics Engineers Inc2023